• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.95-102
• /
• 2006

Recently particulate matter(PM) emission regulations are becoming more strict for diesel engines. There is increasing interest for measuring not only concentration but also size of the particles. Laser-induced incandescence (LII) has emerged as a promising technique for measuring particle volume fraction and size. In this study, the Simple Time Resolved-LII method was applied to exhaust of Ethylene diffusion flame and diesel engine exhaust for measuring soot and PM size. The particle size data from LII technique were calibrated using Field Emission Scanning Electron Microscope(FE-SEM) and Transmission Electron Microscope(TEM) photographs. In diesel engine experiments for particle size measurement, results from LII measurement are in a good agreement with those from TEM photograph, and difference between two measurements was less than 16%.

• 한국가스학회지
• /
• 제18권4호
• /
• pp.21-26
• /
• 2014

본 연구에서는 알루미늄 분말의 입자 크기에 따른 폭발특성을 20 L 분진폭발실험장치(K$\ddot{u}$hner제작)를 사용하여 조사하였다. 사용한 시료는 각각 16, 33, $88{\mu}m$의 체적기준 평균입경을 갖는 알루미늄 입자를 대상으로 실험을 수행하였다. 분진의 평균입경이 16, 33, $88{\mu}m$에서 폭발하한농도는 각각 40, 60, $125g/m^3$로서 분진의 입경이 증가하면 점차적으로 증가하는 경향을 나타냈다. 또한 각각의 알루미늄 분진에서 입자 크기의 증가는 폭발압력 및 분진폭발지수($K_{st}$)의 감소로 이어졌다. 이러한 본 연구 결과는 알루미늄 분말의 활용 및 안전 운전을 위한 중요 자료로 활용될 수 있다.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.562-569
• /
• 2018

We propose an economic and facile method for the preparation of silica nanoparticles through a two-step process utilizing chlorosilane residues. Mixed chlorosilane residue was alcoholized with absolute ethanol as a first step to form tetraethoxysilane (TEOS). The TEOS was then utilized as a silicon source to synthesize silica nanoparticles in a sol-gel method. The alcoholysis process was designed and optimized utilizing the Taguchi experimental design method and the yield of TEOS was as high as 82.2% under optimal synthetic conditions. Similarly, the Taguchi method was also utilized to study the effects of synthesis factors on the particle size of silica nanoparticles. The results of statistical analysis indicate that the concentration of ammonia has a greater influence on particle size compared to the mass fractions of TEOS and polyethylene glycol (4.6% and 9.7%). The purity of the silica particles synthesized in our experiments is high, but the specific surface area and pore volume are small.

• 공업화학
• /
• 제7권6호
• /
• pp.1061-1068
• /
• 1996

본 연구는 다공성 입자에 전도성 단량체를 침투시켜서 전도성 고분자 복합체를 제조하는 연구로 다단계 seed 중합법을 이용하여 입자를 제조하고, 용매추출법으로 선형 고분자를 제거하는 방법으로 specific pore volume 및 specific surface area가 각기 다른 다공성 입자를 제조하였고, 이 다공성 입자를 모체 고분자로 하여 도핑제를 산화용액에 녹여 흡수시키고 건조한 뒤 전도성 단량체를 유기용매에 녹여 다공성 입자에 침투시킨 후 중합하여 전도성 복합체를 제조하였다. 이때, 모체 고분자에 침투되는 전도성 단량체의 농도 및 유기용매와 산화제의 산화용매 등을 중합 변수로하여 이 변수들과 전도도와의 상관 관계를 살펴보았다.

• 한국화재소방학회논문지
• /
• 제21권2호
• /
• pp.64-73
• /
• 2007

호흡기 내에서 유해물질의 체내흡수 및 방어특성은 영역별로 다르며 흡입연기의 장 단기 인체 유해성은 연기의 호흡기 내 침착위치 및 침착밀도와 밀접한 관계를 가지고 있다. 이 연구에서는 미소부피 위치 추적법을 이용한 입자침착율 계산 기법을 사용하여 휴식 및 가벼운 운동에 해당하는 호흡조건별로 또한 구강 및 비강 호흡별로 각 입자크기에 대하여 호흡기 각 영역별로 단위 면적당 침착분율 등 침착 특성을 구하였다. 이 결과는 연기에 흡착된 유해물질의 체내 흡수량 산정 등에 이용되어 연기의 인체 유해성 판정에 도움을 줄 수 있을 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.915-924
• /
• 2016

After a severe accident to the nuclear reactor, the in-vessel retention strategy is a key way to prevent the leakage of radioactive material. Nanofluid is a steady suspension used to improve heat-transfer characteristics of working fluids, formed by adding solid particles with diameters below 100nm to the base fluids, and its thermal physical properties and heat-transfer characteristics are much different from the conventional working fluids. Thus, nanofluids with appropriate nanoparticle type and volume concentration can enhance the heat-transfer process. In this study, the moving particle semi-implicit method-meshless advection using flow-directional local grid method is used to simulate the bubble growth, departure, and sliding on the downward-facing heating surface in pure water and nanofluid (1.0 vol.% $Al_2O_3/H_2O$) flow boiling processes; additionally, the bubble critical departure angle and sliding characteristics and their influence are also investigated. The results indicate that the bubble in nanofluid departs from the heating surface more easily and the critical departure inclined angle of nanofluid is greater than that of pure water. In addition, the influence of nanofluid on bubble sliding is not significant compared with pure water.

• 한국대기환경학회지
• /
• 제17권6호
• /
• pp.475-485
• /
• 2001

The presence of airborne particles in the earth atmosphere expert important controls on the global climate because of their effects on the radiative balance. However, there are major uncertainties associated with the direct and indirect radiative effects of aerosols. In addition, their physicochemical properties cannot only the decline of air quality but also damage human health. Airborne particles were collected by two different commercial air samples, high volume sampler(for TSP) and low volume sampler(for P $M_{10}$ ) at the campus of Kunsan National University during February to September, 2000. In most cases, TSP and P $M_{10}$ were sampled once a week for the duration of 24 hours from 9:00 a.m. In addition samples were collected more intenisve, when the yellow dust was expected. Each sample was analyzed for pH and major ions concentration (C $l^{[-10]}$ , S $O_4$$^{2-}$, N $O_3$$^{[-10]}$ , N $a^{+}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$) by ion chromatography and atomic absorption spectrophotometry. Acidity (pH) of TSP and P $M_{10}$ ranged from 5.09 to 8.51 and from 6.22 to 7.54, respectively. The concentrations of airborne particles were found to satisfy both the short and long-term air quality standards during the sampling period. If the ratio of ionic concentrations originating from None sea salt(Nss) to sea salt(ss) in aerosol samples was concerned, it was found that the ionic concentrations from marine environment contributed dominantly in total mass concentration in the airborne particles. When seasonal trends were examined, the TSP concentrations in spring were higher than those of other seasons. It may result form frequent occurrences of yellow dust and during the spring season. The concentration ratio of P $M_{10}$ to TSP ranged from 0.78 to 1 during the sampling period. pH in the airborne particle was highest during spring, but the other seasons maintained almost same level. These results suggest that alkaline species in yellow dust can directly neutralize aerosol acidity. During spring season, yellow dust could be a positive factor that can defer the acidification of surface soil and water by neutralizing acidic aerosols in the atmosphere.osphere.

• 한국토양비료학회지
• /
• 제13권2호
• /
• pp.57-63
• /
• 1980

시판(市販)되고 있는 광재규산질비료를 사별(篩別)하여 10목이하(目以下) 20-35목(目) 및 100목이상(目以上)의 3개입자군(個粒子群)으로 분리(分離)하고 그들을 토양(土壤)에 처리했을 때 토양용액(土壤溶液)의 규산함량변화(珪酸含量變化), 토양(土壤)에서의 이동성(移動性) 등을 조사(調査)한바 다음과 같은 결과(結果)를 얻었다. 1. 규산질비료(珪酸質肥料) 20mg을 증류수50ml로 침출(浸出) 했을 때 용액(溶液)의 규산농도(珪酸濃度)는 10목이하(目以下), 20-35목(目), 100목이상(目以上) 입자(粒子)에 처하여 각각 0.3, 1.0, 3.2ppm 이었으며 1N-Na-acetate용액(溶液)으로 침출(浸出)했을 때의 농도(濃度)는 각각 24.5, 126.2, 225.5ppm 이었다. 2. 규산질비료(珪酸質肥料) 20mg을 첨가(添加)한 상양(上壤)20g을 증류수 50ml로 침출(浸出)했을 때 10목이하(目以下), 20-35목(目), 100목이상(目以上) 입자(粒子)의 규산질비료(珪酸質肥料)를 처리한 토양용액중(土壤溶液中)의 규산농도(珪酸濃度)는 규산(珪酸)을 첨가(添加)하지 않았을 때 보다 각각 0.25, 0.97, 3.28ppm 증가하였다. 3. 토양용액(土壤溶液)의 pH는 규산질비료(珪酸質肥料)의 첨가(添加) 여부와 관계(關係)없이 담수일수(湛水日數)와 함께 2~4주(週)까지는 상승(上昇)하고 그 후(後) 6~10주(週)까지 하강(下降)하였다. 이때 수용액중(水溶液中)의 규산농도(珪酸濃度)는 pH와 역상관(逆相關)을 냐타내었으나 담수(湛水) 6~10주이후(週以後)에는 pH와 관계(關係)없이 수용액중(水溶液中)의 규산농도(珪酸濃度)는 증가하였다. 4. 토양투하수(土壤透下水)의 분액별(分液別) 규산농도(珪酸濃度)는 규산질비료(珪酸質肥料)를 첨가(添加)하지 않았을 경우 투과수(透過水)의 양(量)이 0.88 pore volume에 달(達)했을 때 최고치(最高値)를 나타내었으며 20-35목(目), 100목이상(目以上)의 규산질비료(珪酸質肥料)를 첨가(添加)하였을 때에는 각 각 0.94, 1.03pore volume에서 최고농도(最高濃度)를 나타내었다. 5. 1.5pore volume의 증류수를 투하(透下)시킨 후(後) 토양(土壤) column의 부위별(部位別) 규산함량(珪酸含量)을 분석(分析)한 바 수용성(水溶性) 규산(珪酸) 함량(含量)은 6~9cm이하에서는 깊이에 관계없이 일정(一定)하나 그 위 부위(部位)에서는 위로 갈수록 낮은 함량(含量)을 나타내었다. 그러나 1N-Na-acetate 가용규산(可溶珪酸)은 이동(移動)되지 않고 규산(珪酸) 처리부위에 집적(集積)되어 있었다.

• 상하수도학회지
• /
• 제33권1호
• /
• pp.79-86
• /
• 2019

In order to measure the filtration characteristics of a cotton ball shape filter, the experiments of suspended solids(SS) surrogate material selection and filtration performance have been carried out in this study. Between the two materials of powdered activated carbon(PAC) and powdered red-clay, PAC is more suitable surrogate material in terms of experimental criteria and particle size distribution in the non-point source pollutants removal system. As a result of the filtration experiments with the cotton ball shape filter, the initial headloss was about 8 cm, and the headloss slightly increased over filtration time. The Kozeny-Carman equation was used to analyze the changes of pressure and porosity during the filtration. The initial porosity was calculated as 0.945 and it decreased to 0.936 at the end of design filtration time. As the filtration continued, the SS concentration of the filtered water gradually increased and the SS removal rate gradually decreased. When the SS target removal efficiency is assumed to be 80%, the cumulative SS removal capacity is expected as $28.8kg/m^2$. This means the volume loading rate of the cotton ball shape filter can be $115m^3/m^2$ when the typical SS concentration of non-point source water pollution is assumed as 250 mg/L.

• 설비공학논문집
• /
• 제8권4호
• /
• pp.550-560
• /
• 1996

Recently, fluidized bed heat exchangers with circulating liquid are widely used in a number of places-chemical, process, food concentration, waste water treatment facilities, etc. In a circulating heat exchanger, solid particles circulate with the liquid, thereby increase the heat transfer and reduce the fouling potential of the heat exchanger. In this study, glass beads were circulated through a vertical tube. The pressure loss and the heat transfer coefficient were measured. At low flow velocities, glass beads enhanced the heat transfer considerably. The enhancement increased as the volume fraction of the glass beads increased. The pressure loss showed a similar trend. From the observed particle behavior near tube wall, a possible explanation of the trend is provided.