• Land and Housing Review
• /
• v.15 no.1
• /
• pp.147-156
• /
• 2024

This study aims to reduce CO₂ generated during the manufacturing process by using limestone (CaCO₃), a carbonate mineral used in the production of cement clinker, as a decarbonated raw material that does not contain CO₂. Among various industrial by-products, we attempted to use cement paste attached to waste concrete. In general, limestone for cement must have a CaCO₃ content of at least 80% (CaO, 44% or more) to ensure the quality of cement clinker. However, the CaO content of waste concrete fine powder is about 20% on average, so in order to use it as a cement clinker raw material, the CaO content must be increased to more than 35%. Therefore, by using the difference in hardness of the mineral composition of waste concrete fine powder to selectively crush CaO type minerals with relatively low hardness, classify and sieve, the CaO content can be increased by more than 35%. Accordingly, in this study, we experimentally and statistically reviewed and analyzed the optimal conditions for efficiently separating CaO and SiO₂ and other components by selectively pulverizing minerals containing relatively low CaO through a grinding process. As a result of the optimal grinding conditions experiment, it was found that the optimal conditions were a grinding time of less than 5 minutes, a type of material to be crushed of 30 mm, and an amount of material to be crushed of 1.0 or more. However, it is judged that it is necessary to review pulverized materials of mixed particle sizes rather than pulverized products of single particle size.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.580-586
• /
• 2009

In this study, co-combustion characteristics of Chinese bituminous coal and North Korean anthracite were investigated using a 2 MWe scale circulating fluidized bed power plant. At first, the combustion efficiency of bituminous coal of China and Australia as a function of excess air ratio and temperature were observed. The results showed that the combustion efficiency was influenced by particle size and volatile content of coal, the combustion efficiency of Chinese bituminous coal was over 99.5%. The unburned carbon particles from fly ash and bottom ash were a content 5~7% and 0.3%, respectively. The combustion efficiency with the mixture ratio 20% of bituminous coal and anthracite decreased over 5% because of the increase of entrained particles by a small average particle size of anthracite in the combustor. However, the outlet concentration of $SO_2$ and $NO_x$ was not changed remarkably. The concentrations of the typical air pollutants such as $NO_x$ and $SO_2$ were 200~250 ppm($O_2$ 6%), 100~320 ppm($O_2$ 6%) respectively. The outlet concentration of $NO_x$ was decreased to 30~65% with $NH_3$ supplying rate of 2~13 l/min in SCR process. The $SO_x$ removal efficiency was up to 70% by in-furnace desulfurization using limestone with Ca/S molar of approximately 6.5. With wet scrubbing using $Mg(OH)_2$ as absorbent, the $SO_x$ removal efficiency reached 100% under near pH 5.0 of scrubbing liquid.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.190-196
• /
• 2001

Alunite was dehydrated at 500~$580^{\circ}C$ and desulfurued at 580~$780^{\circ}C$ in air atmosphere. Therefore, this study was carried out to investigate the formation conditions of anhydrite ($CaCO_4$) when the mixtures of alunite TEX>$[K_2SO_4$.$Al_2(SO_4)_3$.$4Al(OH)_3$] and limestone ($CaCO_3$)were roasted. Alunite scarcely dected the partial pressures of $CO_2$(g), but limestone was bansformed into CaO at $650^{\circ}C$ in air and $900^{\circ}C$ in saturated $CO_2$(g), atmosphere, respectively. When the the mixtures of 1 mol of alunite and 6 rnol of limestone were roasted for 2 hours at lO00C in air and saturated $CO_2$(g), anhydrite was formed at $550^{\circ}C$ calciumlangbeinite, at $700^{\circ}C$and haiiyne, at 800~$950^{\circ}C$. The formation rate of anhydrite in air and saturated $CO_2$(g), was 99.0 % and 95.0 %, respectively. then the formation rate of anhydrite was not changed in air atmosphere but increased according to the decreasing of the particle size of limestone in saturated $CO_2$(g). Therefore, when the mixture of 1 mol of alunite and 6 rnol of limestone were roasted, the clinker composed of lmol of haiiync and 1 mol of calciumlangbeiilte can be manufactured

• Advances in concrete construction
• /
• v.10 no.6
• /
• pp.515-526
• /
• 2020

Cold-mixed asphalt mixture is a widely recommended asphalt pavement materials with potentially economic and environmental benefits. Due to the reduction of natural non-renewable mineral resources, powder minerals with similar properties are considered as new mineral fillers in asphalt mixtures. This study explored the feasibility of using cement to replace natural limestone powder (LP) in emulsified asphalt concrete modified by styrene-butadiene styrene copolymer. The experimental tests, including compressive strength, Marshall stability as well as moisture susceptibility test, were used to investigate the mechanical properties, the Marshall stability, flow value, as well as the moisture damage. In addition, the influence of material composition on the performance of asphalt concrete is explained by the microstructure evolution of the pore structure, the interface transition zone (ITZ), and the micromorphology. Due to mineralogical reactivity of cement, its replacement part of LP improved the mechanical properties, Marshall stability, but it will reduce the moisture susceptibility and flow value. This is because with the increase of the cement substitution rate, the pore structure of the asphalt concrete is refined, the width of ITZ becomes smaller, and the microstructure is more compact. In addition, asphalt concrete with a larger nominal particle size (AC-16) has relatively better performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.132-138
• /
• 2009

Soils originated from limestone, located at the southern part of Kangwon province and Jecheon, Danyang of Chungbuk province are mainly composed of fine texture, have different properties from soils originated from granite and granite gneiss, especially for water movement. This study was conducted for making PTF(Pedo-Transfer Function) for Kfs(field saturaton hydraulic conductivity) estimation, and for investigating the relation between soil particle distribution and the infiltration and percolation rate in soils originated from limestone. Soils used for the experiment were 6 soils of Gwarim, Mosan, Jangseong, Maji, Anmi and Pyongan series. Infiltration and percolation rate for the soil were measured by a disc tension infiltrometer and a Guelph permeameter, respectively. The particle size distribution and organic matter content of the soils were analyzed. Kfs was not related with sand, silt, clay, and organic mattrer (OM) content because of forest soils which contained high gravel, pebble, and cobble content, and O layer with high OM content. After Mosan soil series and O layer of Gwarim series were excluded for the data analysis, Kfs was explained as a linear function with sand and clay content and a exponential function with OM content. As a result, the PTF equation was obtained as Kfs=-4.20558+0.479706*(S)+0.023187*exp(1.829*OM) ($R^2=0.6558^{*}$).

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.3-12
• /
• 2006

The feasibility for the employment of manganese nodule as an adsorbent for $SO_{2}$ gas has been investigated. The specific surface area of manganese nodule particle, which used in the experiments, was ca. $221.5m^{2}/g$ and the content of sulfur in manganese nodule was observed to significantly increase after $SO_{2}$ was adsorbed on it. The EPMA for the distilled water-washed and methanol-washed manganese nodule particle after $SO_{2}$ adsorption showed that its sulfur content was slightly decreased to 14.7% and 13.1% respectively, from 15.4% before washing. The XRD analysis of manganese nodule showed that todorokite and birnessite, which are manganese oxides, and quartz and anorthite were the major mineralogical components and weak $MnSO_{4}$ peaks were detected after $SO_{2}$ was adsorbed on manganese nodule. For an comparative investigation, limestone was also tested as an adsorbent for $SO_{2}$, however, no peaks for $CaSO_{4}$ were found by XRD analysis after the adsorption of $SO_{2}$. As the size of adsorbent increased, time for breakthrough was decreased and the adsorbed amount of $SO_{2}$ was also diminished. The $SO_{2}$ adsorption was hindered when its flow rate became high and the adsorption capacity of manganese nodule was observed to be superior to that of limestone. In addition, the mixture of manganese nodule and limestone did not show an increase in the adsorption of $SO_{2}$. Finally, as the temperature was raised, the adsorbed amount of adsorbate on manganese nodule was found to be decreased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.2
• /
• pp.79-85
• /
• 1991

This study reports on the physical and chemical properties of the whole soils (<2mm) derived from five major rocks of granite, granite-gneiss, limestone, shale, and basalt in Korea. The properties were considered from the kind and frequency distribution of rock-forming minerals in the parent rocks. In particle size distribution, sand fractions were high in the soils from granite-gneiss, silt fractions mainly, in the residual soils from limestone, shale, and basalt. And clay fractions were particularly high in the colluvial soil from limestone and the old alluvial soil from basalt. pH, extractable Ca and Mg, and cation exchange capacity of the soils derived from limestone might be considered to be high due to the presence of sand and/or silt-sized calcite and dolomite inherited from the parent rocks. However, the soils derived from granite and granite-gneiss, being abundant in feldspars, quartz, and micas, showed a tendency to the contrary. A soil from shale composing of high quartz tended to have pH. extractable Ca, base saturation, and low exchangeable Al. In total element analysis, the soils derived from parent rocks with high contents of (i) orthoclase and micas, (ii) biotite, primary chlorite, and augite, and (iii) carbonate minerals and plagioclase as a rock-forming mineral showed a tendency to decrease the contents of $K_2O$, $Fe_2O_3$ and MgO, and CaO in comparison with those of their parent rocks.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.258-263
• /
• 2018

This study attempted to utilize ultrafine precipitated calcium carbonate for fluoride removal from the wastewater of electronics industries. An average particle size of the calcium carbonate was $0.96{\mu}m$, and pH of the aqueous slurry was 10 with 70% in mass. The suspension solution showed approximately 2 mL/hr of the sedimentation rate. The present calcium carbonate solution could be comparable to the conventional aqueous calcium source, $Ca(OH)_2$, for the neutralization and removal of fluoride ions. Depending on the amount of an additional alkali source, less amounts of test Ca-source slurries were required to reach the solution pH of 7.0 than that of using the aqueous calcium hydroxide. It was also found from XRD analysis that more calcium fluoride precipitates were formed by the addition of calcium carbonate solution rather than that of calcium hydroxide. In addition, Minteq equilibrium modelling estimated various ion complexes of fluoride and calcium in this process.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.1-8
• /
• 2022

The purpose of this study is to prepare GPTMS((3-Glycidoxypropyl) trimethoxysilane)-SiO₂ nanofluid and analyze the effect of nanofluid injection on carbonate reservoirs. Structural analysis of silica nanoparticles modified by GPTMS was investigated by FTIR(Fourier transform infrared spectroscopy). C-H stretching vibrations at 2,950 cm^-1 indicating the silica surface modification with GPTMS were observed when the silane feed was over 0.5 mmol/g. Also, the coreflooding test by nanofluid injection on the aged limestone and dolomite plug samples was carried out with different particle concentration and flow rate. The incremental oil recovery was up to 18.9%, and contact angle and permeability of carbonate samples were changed by the effect of nanoparticle adsorption on pore which caused wettability alteration and pore size change. Therefore, the prepared nanofluid will be utilized as an injection fluid for enhancing oil recovery and modifying fluid flow properties such as change of rock wettability and permeability in carbonate reservoirs.

• Korean Journal of Poultry Science
• /
• v.8 no.2
• /
• pp.55-68
• /
• 1981

Calcium and phosphorus are not only indispensable for the bone formation and body fluids equilibrium but also are major components of egg shell. It is nutritionally important, therefore, to investigate the metabolism of calcium and phosphorus and to search for optimum requirement of calcium and phosphorus and the availability of various sources of calcium an4 phosphorus by poultry. An attempt was made to review the nutrition of calcium and phosphorus in poultry diets. 1, Calcium and phosphorus have great interrelationship with vitamin D in their metabolisms. 2. Most of the plant-origin phosphorus are existing in phytic form and it leads to low availability when used in poultry rations, although calcium and phosphorus present in animal-origin or mineral supplements are highly available in general. 3. Calcium and phosphorus requirement from existing information indicated that 1.0% calcium and 0.7% phosphorus for broiler and egg-type chicks, and 3.5% calcium and 0.4% phosphorus for laying hen. 4. It has been recommended that calcium and phosphorus level should be increased when the feed intake was decreased or when the egg Production rate was higher or when the hens are old. 5. Mono-, ci-, tri-, calcium phosphate, calcium carbonate, bone meal, limestone and oyster shell u the most readily available among various sources of calcium phosphorus supplements. Soft rock phosphate, deflourinated phosphate and gypsum are somewhat inferior to the previous ones in bioavailability. 6. The effect of particle size of calcium supplements on egg shell quality and egg production rate is not yet clearly defined but recent works showed that oyster shell is more available when it was coarse and limestone is more available when it was fine in panicle. size. 7. Present data indicated that mixed feeding of oyster shell and limestone is superior to the single feeding of each on laying performance. 8. Significant interaction between phosphorus and sodium was observed, that is, excessive sodium decreased egg production in layer and body weight growth in broiler in the low phosphorus diets but increased them in the high phosphorus diets.