• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1314-1316
• /
• 1994

$0.36[wtx]Sio_2$ and $0.1[wtx]H_3BO_3$ were added to strontium ferrite magnets of the magnetoplumbite phase SrO $5.7Fe_2O_3$. This experiment was carried out to investigate the effects of particle size distribution as a function of milling time(20,30,40,50,60,70 hours) on the magnetic properties of SrO $5.7Fe_2O_3$ ferrite magnet. The B-H Curve, density and the degree of orientation were measured. The optimal conditions of making magnets and properties of a typical sample are the following : The milling time was 60 hours. Magnetic and physical properties are $B_r$=4000[G], $_BH_c$=3330[Oe], $_IH_c$=3525[Oe], (BH)max=3.786 [MGOe], density= $5.0063g/cm^2$, orientation factor f=0.813.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.39-48
• /
• 2004

The purpose of this paper was to confirm the application of the equation of the soil-water characteristic curve on an unsaturated soil. To this ends, a series of suction test was conducted on the selected 4 kinds of soil which is located in Korea, using the modified pressure extractor apparatus. And it was carried out to analyze the experimental parameters which can describe the soil-water characteristics, were determined by using the data obtained from the experiment. From the results, it was found that the matric suction was varied according to the grain size distribution, amount of fine grain particle and void ratio. Also it was found that the residual volumetric water content was decreased with the void ratio, but the index related air entry value, the soil parameter related water content and the parameter with residual water content were increased with the void ratio. And the application of equation of the soil-water characteristic curve was confirmed for the various conditions and the various state by the comparison between the volumetric water content measured by the experiment and the predicted values.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.1
• /
• pp.15-27
• /
• 2005

In this paper, a method reasonably predicting soil water characteristic curve of domestic weathered granite soils was suggested, based on the test results obtained through experiments. In other words, a method to estimate the parameters of Fredlund and Xing's equation using an ANN (artificial neural network) was proposed. The particle size distribution, compacted water content and void ratio were used as input data in the ANN model for predicting the parameters, since it was found that these basic soil properties affect the parameters obtained from the test results and the fitting results of SWCC. The network model proposed in this study to obtain the parameters of Fredlund and Xing's SWCC equation produced reliable predictions, and the precision of the prediction results from the proposed method was high, in comparison with the prediction results of other methods.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.235-241
• /
• 2004

The dissolved air flotation (DAF) process has been widely used for removing suspended solids with low density in water. It has been known as measuring the size of microbubbles precisely which move upward rapidly in contact zone is difficult. In this study particle counter monitoring (PCM) method is used to measure the rising microbubble after injection from a nozzle. Size and distribution curve of microbubbles are evaluated at different conditions such as pressure drop at intermediate valve, length of pipeline between saturation tank and nozzle and low pressure. And the efficiency is also checked when it collides with different size floc. The experimental results show the following fact. As the final pressure drop occurred closer to a nozzle, the bubble size became smaller. And small bubble collides with large floc as well as small one because of its physical characteristic. However large bubble collides well with large floc rather than small one since hydrodynamic flow in streamline interferes to collide between two. With performing computational process by mathematical model we have analyzed and verified the size effect between bubble and floc. Collision efficiency is the highest when P/B ratio shows in the range of 0.75 < P/B ratio ($R_{particle/Rbubble}$) < 2.0.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.744-746
• /
• 2003

A ZnO varistor with reference voltage 250V/mm was fabricated through the control of particle size in slurry and the variation of sintering conditions. It was found that to measure the flatness of the V-I characteristic curve in the small-current region and the flatness of the V-I characteristic curve in a large-current region was improved nonlinearity of the fabricated ZnO varistor. According to the IEC 60099-4 was measured the accelerated aging test and high current test of the distribution class surge varistor which is excellent in respect to the property of ZnO varistor.

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.594-602
• /
• 1998

Titanium hydroxide (TiO({{{{ {OH }_{2 } }})) fine particles were produced by the reverse micelle technique. For the formation of titanium hydroxide (TiO({{{{ {OH }_{2 } }})) particles with the technique reversed micellar solution was prepared by solubilizing water into organic solvent (isooctane) with a surfactant and titanium alkoxide (tetraisopropyl orthotitanate) diluted with isopropyl alcohol was added to the reversed micellar solution. The hdrolyzed species (TiO({{{{ {OH }_{2 } }})) was formed by the hydrolysis of titanium alkoxide and titanium dioxide is then formed by the condensation of the hydrolyzed species. There are several process variables such as surfactants concentration of surface cosurfactant hydrolysis temperature and pH. In this work the ef-fects of process variables on paticle shapes particle size distribution and paticle agglomeration were bi-nodal for an anionic surfactant(AOT) in the whole range of temperature pH and surfactant concentration of this experiment. The addition of ethanol as a cosurfactant resulted in narrow particle size distribution of the experiment. The additiono of ethanol as a cosurfactant resulted in narrow particle size distribution and 0.12${\mu}{\textrm}{m}$ of smaller average particle diameter. FT-IR spectrum of particles shows the absorption peak of Ti-OH bonding and Ti-O bonding. An exothermic peak around 41$0^{\circ}C$ in TGA-DTA curve shows that crys- tallized anatase phase appears and completely transits to anatase around 45$0^{\circ}C$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.136-145
• /
• 2009

Factors influencing shear behavior of granular material include particle size, shape, distribution, relative density, particle crushing, etc. In this study, these factors are characterized by viewpoint of shear behavior using numerical analysis based on DEM. Geometrical particle shape is represented by a combination of small circular particles and influence of particle shape on crushing is studied through relative comparisons between clump (uncrushable) and cluster (crushable) models which are modeled using DEM. Also, particle shape is quantified by the dimensionless parameters such as circularity and convexity. The results indicate that particle shape indexes have a negative association with internal friction angle. Also, internal friction angle becomes reduced and failure envelop curve becomes nonlinear due to the particle crushing. It is also found that numerical results are quite good agreement with the experimental test conducted in this study.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.360-364
• /
• 2001

The fractal theory is an interesting tool for measuring the soil properties which are irregular and dynamical. A simple example is shown in this paper that (statistical) fractal dimension can be evaluated from the traditional Particle-size distribution(PSD) curve. The results of Wu et al.(1993) and Bittelli el al.(1999) were referred to demonstrate the fractal analysis.

• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.104-107
• /
• 1962

It is thought that the adsorption isotherms in dyeing of cellulose by the direct cotton dyes are consisted of combined type of Langmuir and Freundlich as the opinion of Fujino, et al;$[D]_F=ab[D]_S/(1+b[D]_S)+k[D]_S$where a,b,k; constants, $[D]_F$; dye adsorption on the fiber, $[D]_S$; dye concentration in the bath. This means that the dyes adsorbed in cellulose present in the state of partly mono molecular and partly aggregate; the characteristic fading order curve will be expressed as the combined system of uniform particle size distribution and assumed that the slope of the theoretical models of Baxter, et al., and assumed that the slope of curve will be changed near the point of a, the saturation value of Langmuir isotherms in the above equation. Firstly, the theoretical fading rate curve was treated with small colour difference as the one step of experimental of above consideration.

• Electrical & Electronic Materials
• /
• v.8 no.3
• /
• pp.324-331
• /
• 1995

0.36[wt%l $SiO_{2}$ and 0.1[wt%] $H_{3}$B $O_{3}$ were added to strontium ferrite magnets of the magnetoplumbite phase SrO.5.7F $e_{2}$ $O_{3}$ to hinder grain growth and accelerate sintering, respectively. This experiment was carried out to investigate effect of particle size distribution as a function of milling time(20, 30, 40, 50, 60, 70 hours) on the magnetic properties of SrO.5.7F $e_{2}$ $O_{3}$ ferrite magnet. The B-H curve, density and the degree of orientation were measured. And the microstructure of ferrite magnets was examined with a SEM. The optimal conditions and properties of the typical sample are the following : The milling time was 60 hours. Magnetic and physical properties are $B_{r}$=4, 000[G], $_{b}$ $H_{c}$=3, 330[Oe], (BH)max=3.786[MGOe], $_{I}$ $H_{c}$=3, 525[Oe], density=5.0063[g/c $m^{3}$] and orientation factor f=0.813.0.813.3.3.