• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.26-32
• /
• 2019

The vortex flow behind a bluff body has been a subject of interest for a very long time because of its engineering applicability such as to vortex induced vibration. In the near wake of a bluff body, vortices are periodically shed in two shear layers, which originate in the trailing edges. The far wake is made up of the classical Karman vortices, which are connected together by streamwise and spanwise vortices. These vortex formations have been studied in many experimental and numerical ways. However, most of the studies considered non-cavitating flow. In this study, we investigated cavitating flow in the wake of a two-dimensional wedge. Experiments were conducted in a cavitation tunnel of Chungnam National University. Using a particle image velocimetry (PIV), we measured the velocity fields under two different flow conditions: non-cavitating and cavitating regimes. We also investigated the vortex shedding frequencies using an absolute pressure transducer mounted on the top of the test window. Throughout the experiments, it was found that the shedding frequency of the vortex was strongly affected by cavitation, and the Strouhal number could exceed its value in the non-cavitating regime.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.68-74
• /
• 2022

This study analyzed the wake characteristics of the rim-driven propeller (RDP) used in an underwater robot. For underwater robots to perform specific missions, not only propulsion characteristics but also wake characteristics must be considered. In this study, a blade was designed based on NAC 0012 with a symmetrical cross-section. The RDP was hubless with three or four blades. The influence of both the free water surface and the bottom was considered, and the wake was measured using a particle image velocimetry in the advance ratio of 0.2 to 1. Model 1 showed symmetrical wakes in the entire advance ratio section. Model 2 showed asymmetric wakes due to the influence of the free water surface and the bottom at low advance ratio.

• Journal of the Korean Society of Visualization
• /
• v.19 no.3
• /
• pp.115-122
• /
• 2021

Oral cancer surgery typically consists of resection of lesion, neck dissection and reconstruction, and it has an impact on the position of hyoid bone. Therefore, morphological change of airway can occur since the geometric parameter of airway is correlated with the hyoid bone. Airflow is affected by geometry of the airway. In this study, flow characteristics were compared between pre- and post-surgery models by both particle image velocimetry (PIV) and numerical simulation. 3D model of upper airway was reconstructed based on CT data. Velocity is accelerated by the reduced channel area, and vortex and recirculation region are observed in pre- and post-surgery models. For the post-surgery model, high pressure distribution is developed by significantly decreased hydraulic diameter, and the longitudinal flow stream is also interrupted.

• Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2024

In this study, the swimming behavior of a small box jellyfish (Carybdea brevipedalia), which consists of inhaling external seawater and expelling it through its mouth to generate forward thrust, was characterized using particle image velocimetry (PIV). The flow rate and structure during the suction and discharge process were quantitatively analyzed. During swimming, there was a change in the ratio of the internal area during inhalation and expulsion. Specifically, there was a 1.10-fold difference between the maximum area after inhalation and the minimum area after discharge. The maximum distance traveled after discharge was inversely proportional to the size of the inner area, with a 2.48-fold difference in the minimum distance traveled after suction. Depending on the propulsion stage, the inner area decreased and then increased in proportion to the moving distance and speed. The moving distance of the small box jellyfish was measured for each period. The speed for each swimming stage increased and then decreased at intervals of 0.15 to 0.2 seconds, and the suction and discharge cycle period was measured at approximately 0.5 seconds. Collectively, our findings provide a methodological basis for studying the swimming behavior of small and highly active trailing jet jellyfish, as well as the biological mechanisms that determine this behavior.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2458-2473
• /
• 2024

The turbulent flow in reactor pressure vessel (RPV) of pressurized water reactor (PWR) is important for the flow rate distribution at core inlet. Thus, it is vital to study the turbulent flow phenomena in RPV. However, the complicated fluid channel consisted of inner structures of RPV will block or refract the laser sheet of particle image velocimetry (PIV). In this work, the matched index of refraction (MIR) of sodium iodide (NaI) solution and acrylic was applied to support optical path for flow field measurements by PIV in the 1/10th scaled-down RPV model. The experimental results show detailed velocity field at different locations inside the scaled-down RPV model. Some interesting phenomena are obtained, including the non-negligible counterflow at the corner of nozzle edge, the high downward flowing stream in downcomer, large vortices above vortex suppression plate in lower plenum. And the intensity of counterflow and the strength of vortices increase as inlet flow rate increasing. Finally, the case of asymmetry flow was also studied. The turbulent flow has different pattern compared with the case of symmetrical inlet flow rate, which may affect the uniformity of flow distribution at the core inlet.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.83-88
• /
• 1996

두 인접한 원주 유동장을 입자 영상 속도계를 이용하여 연구하였다. 실험은 회류수조에서 행하였다. 흐름방향에 평행하게 배치하는 방법과 직교배열의 두가지 방법으로 원주를 배열하였다. 연구 결과는 다른 연구자의 결과와 일치함을 보여주었다. 본 연구를 통하여 입자 영상 속도계를 이용한 유동장 해석이 대단히 효과적임을 알 수 있었다.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.4
• /
• pp.23-27
• /
• 2011

This experimental study was performed to find rpms of the impeller and the surface flow accelerator to make a uniform velocity vertical distribution in the circular water channel. PIV technique was employed to measure the water velocity profiles into the water depth from the free surface. The number of instantaneous velocity profiles was decomposed into mean and turbulence velocity components, and the distribution of velocity fluctuation and turbulence intensity were computed for each experimental condition. From these results, the velocity uniformity was quantitatively determined to present the flow quality in the measuring section of the circular water channel. It has been shown that the proper operation of the surface flow accelerator would make the uniform velocity profiles and reduce the velocity fluctuation near the free surface.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.521-524
• /
• 2002

In the present study, kinetic energy of laminar steady flow in the exit region connected to the square-sectional $180^{\circ}$curved duct was investigated experimentally. The experimental study for air flows was conducted to measure kinetic energy distributions by using the Particle Image Velocimetry(PIV) system with the data acquisition and processing system of Cactus 2000 software. The results obtained from experimental studies are summarized as follows : (1) The critical Reynolds number for a change from laminar steady flow to transitional steadt flow was about 1910, in the 50 region of dimensionless axial position (x/Dh) whirh was considered as a fully developed flow region. (2) Maximum kinetic energy of laminar steady flow was gradually increased as the Reynolds number increased.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.202-209
• /
• 1998

For development of SDI(Spark-ignited Direct Injection) engine, stratified mixture formation with adequate strength at spark plug was required in wide range of engine operating conditions. So, spray structure under high ambient pressure and spray distribution after impingement on piston bowl in motoring engine was visualized by using laser equipments. Also, incylinder bulk flow structure was measured by using PIV (Paiticle Image Velocimetry) system. Counter-rotating tumble port and bowl piston was found effective to conserve bulk motion directed to spark plug in compression stroke. In addition, mask attached near valve seat in intake port was proposed to attenuate conventional tumble component and enhance counter-rotating tumble component.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.9-19
• /
• 2015

Experimental research on characteristics of particle-laden jet by using a coaxial injector was conducted in order to design fuel and oxidizer injectors of the supercavitation underwater vehicle. $1{\mu}m$ and $42{\mu}m$ particles was simultaneously injected to obtain particle and fluid velocity. Small particles($1{\mu}m$) and large particles represent fluid and fuel characteristics respectively. Small particles, which was processed using PIV algorithms, and one for the large particles processed using PTV algorithms. Fluid phase axial velocity increases according to particle loading ratio increases, and particles are located at the outside of the high vorticity region in a mixing layer of a coaxial injector.