• Asian Journal of Atmospheric Environment
• /
• 제4권3호
• /
• pp.141-149
• /
• 2010

Aerosol size and number concentration were observed in the atmospheric boundary layer over Beijing (from near the ground to 1,200 m) on March 15 (a clear day) and 16 (a dusty day), 2005. The results were further compared with lidar measurements in order to understand the dependency of extinction on the particle size distribution and their vertical changes. The boundary layer atmosphere was composed of several sub-layers, and a dry air layer appeared between 400 and 1,000 m under the influence of dust event. In this dry air layer, the concentration of the fine-mode particles (diameter smaller than $1.0\;{\mu}m$) was slightly lower than the value on the clear day, while the concentration of coarse-mode particles (diameter larger than $1.0\;{\mu}m$) was remarkably higher than that on the clear day. This situation was attributed to the inflow of an air mass containing large amounts of Asian dust particles and a smaller amount of fine-mode particles. The results strongly suggest that the fine-mode particles affect light extinction even in the dusty atmosphere. However, quantitatively the relation between extinction and particle concentration is not satisfied under the dusty atmospheric conditions since laser beam attenuates in the atmosphere with high concentration of particles. Laser beam attenuation effect becomes larger in the relation between extinction and coarse particle content comparing the relation between extinction and fine particle content. To clarify this problem technically, future in situ measurements such as balloon-borne lidar are suggested. Here extinction was measured at 532 nm wavelength. Measurements of extinction at other wavelengths are desired in the future.

• 콘크리트학회논문집
• /
• 제20권3호
• /
• pp.317-323
• /
• 2008

본 연구에서는 굳지 않은 콘크리트 및 유동 콘크리트의 흐름 거동에 관한 해석 시뮬레이션 모델의 개발에 관한 것으로, 입자법의 일종인 MPS법 (moving particle semi-implicit method)을 적용하였다. 콘크리트의 유동 현상을 점소성의 흐름 문제로 고려하였으며, 콘크리트 입자의 운동에 관한 지배방정식은 라그랑지 정식화의 Navier-Stokes 방정식과 질량보존의 법칙에 기초하도록 하였다. 굳지 않은 콘크리트의 점소성 흐름 구성관계의 정식화를 위하여 콘크리트는 부동 상태인 경우 고점성체의 유체로, 유동상태인 경우 항복응력 이후 점소성체의 유체로 모델링하였다. 개발된 모델을 이용하여 L-형 박스의 콘크리트 유동 시험에 대해 시뮬레이션 하였으며, 그 결과 예측된 흐름량은 실험의 흐름량과 잘 일치하는 것으로 나타났다. 개발된 입자법의 해석 모델은 점소성 유체의 운동현상에 기초하여 정식화 되어 콘크리트 입자의 유동 및 운동 현상을 잘 묘사해 주는 것으로 평가된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.922-934
• /
• 2010

바다숲 조성용 시설물의 효율적인 배치를 위하여 수치실험을 통하여 바다숲 조성 예정지의 조석류에 의한 해수흐름을 분석하였으며, 분석된 해수흐름을 바탕으로 하여 해조포자의 거동을 파악하기 위하여 입자추적실험을 수행하였다. 수치실험에 사용된 수치모형은 EFDC(Environmental Fluids Dynamics Code)를 사용하였으며, 연직방향으로 총 5개 층으로 나누어 실험을 수행하였다. 실험결과, 바다숲 조성대상해역의 해수흐름패턴은 대상해역 바깥쪽의 주류에 크게 영향을 받고 있음을 알 수 있었고, 잔차류를 분석한 결과 크게 두 개의 순환 고리가 형성되어 있음을 확인하였다. 해수흐름의 패턴을 고려하여 3곳의 바다숲 시설물의 설치장소를 선정하고 저층에 입자를 투입하여 15일간 추적을 실시한 결과, 1번과 3번 정점은 해안선에 연하여 띠형태로 시설하며, 2번 정점은 연안에서 약 300 ~ 500m정도 떨어진 곳에 타원의 형태로 시설하는 것이 보다 효율적일 것으로 판단되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.9-11
• /
• 2003

A homogeneous flow field including more than 2000 spherical particles was directly simulated. Particles are settling by gravity with the Reynolds number ranging from 50 to 300, based on diameter and slip velocity. Particular attention was focused on the distribution of particles. The Reynolds-number dependence, influences of particle rotation and loading ratio, and the dynamics of particle clusters are discussed. In the higher Reynolds number case, the wake attraction causes particle clusters and the average drag coefficient decreases significantly. Non-rotating particles maintain cluster structure and rotating ones moves randomly in the horizontal direction. It is because of the difference in the direction of the lift force.

• 한국입자에어로졸학회지
• /
• 제5권3호
• /
• pp.95-109
• /
• 2009

A low temperature plasma process has been widely used for semiconductor fabrication and can also be applied for the preparation of solar cell, MEMS or NEMS, but they are notorious in the point of particle contamination. The nano-sized particles can be generated in the low temperature plasma process and they can induce several serious defects on the performance and quality of microelectronic devices and also on the cost of final products. For the preparation of high quality thin films of high efficiency by the low temperature plasma process, it is desirable to increase the deposition rate of thin films with reducing the particle contamination in the plasmas. In this paper, we introduced the studies on the generation and growth of nanoparticles in the low temperature plasmas and tried to introduce the recent interesting studies on nanoparticle generation in the plasma reactors.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1090-1094
• /
• 2009

Many problems in geotechnical engineering such as slop failure, debris flow, ground heaving due to embankment, and lateral flow caused by liquefaction are related to large deformation rather than small deformation. Traditional numerical methods such as finite element and finite difference methods have a difficulty to solve such large deformations because they use grids. A particle method was developed for fluid dynamics. The particle method can solve large deformation problems because it uses particles to discretize differential equations. It can also include soil constitutive model and thus solve soil behavior on various boundary conditions. In this study, a particle method, which is based on particles rather than grids, is introduced and used to simulate large deformation including soil failure. The developed method can be applied for various large deformation problems in geotechnical engineering because it incorporates soil constitutive models.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.1020-1027
• /
• 2000

A simple model for describing the non-spherical particle growth phenomena has been developed. In this model, we solve simultaneously particle volume and surface area conservation sectional equations that consider particles' non-sphericity. From the correlation between two conserved properties of sections, we can predict the evolution of the aggregates' morphology. This model was compared with a simple monodisperse-assumed model and more rigorous two-dimensional sectional model. For comparison, formation and growth of silica particles have been simulated in a constant temperature reactor environment. This new model showed good agreement with the detailed two-dimensional sectional model in total number concentration and primary particle size. The present model successfully predicted particle size distribution and morphology without costing very heavy computation load and memory needed for the analysis of two dimensional aerosol dynamics.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.1-6
• /
• 2023

In CO₂ laser surface machining of plastic films in modern display manufacturing, scattering of fume particles could be a major source of well-recognized film surface contamination. This computational fluid dynamics research investigates the suction air flow patterns over a film surface as well as the dispersion of micron-sized fume particles with low-Reynolds number particle drag model. The numerical results show the recirculatory flow patterns near laser machining point on film surface and also over the surface of vertical suction slot, which may hinder the efficient removal of fume particles from film surface. The dispersion characteristics of fume particles with various particle size have been tested systematically under different levels of suction flow intensity. It is found that suction removal efficiency of fume particles heavily depends on the particle size in highly nonlinear manners and a higher degree of suction does not always results in more efficient particle removal.

• 한국진공학회지
• /
• 제10권3호
• /
• pp.283-288
• /
• 2001

본 연구에서는 분자동력학 방법을 사용하여 알루미늄 덩어리 충돌에 관하여 연구하였다. 충돌에 따른 운동량 및 충격력 변화를 통하여, 덩어리 충돌은 단일입자충돌(single particle collision) 특성 일부와 선형사슬충돌(linear chain collisions) 특성 일부를 가지는 것을 살펴보았다. 또한 연속적인 덩어리 증착을 통하여 성장된 박막의 특성을 살펴보았다 원자당 에너지가 너무 낮은 경우보다는 일정 에너지 이상에서 혼합(intermixing) 발생이 잘 이루어지며 짝은 어닐링 공정으로 좋은 박막을 얻을 수 있다는 것을 살펴보았다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권5호
• /
• pp.609-617
• /
• 2012

The flow characteristics of polluted air are analysed by comparing the results obtained from PIV(Particle Image Velocimetry) experiment and CFD(Computational Fluid Dynamics) commercial code. In order to simulate the polluted air flow, the olive oil has been used as tracer particles with the kinematic viscosity of air, $1.51{\times}10^{-5}m^2/s$. The investigation has done in the range of Reynolds numbers of 870, 1730 and 2890 due to the inlet flow velocities of 0.3, 0.6, and 1.0 m/s, respectively. The average velocity and the pressure distributions are comparatively discussed with respect to the three different Reynolds numbers. The results show that the outlet flow rates at three different Reynolds numbers are equivalent of 165 to 167 percent of the inlet ones. The pressure drop occurs in the model closed at both end sides and the highest pressures at each Reynolds number are positioned at the top of the tunnel between the inlet and outlet.