• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.293-300
• /
• 2006

KIER has been developing a Ru-based preferential oxidation catalysts and a novel fuel processing system to provide hydrogen rich gas to residential PEMFCs system. The catalytic activity of Ru-based catalysts was investigated at different Ru loading amount and different support structure. The obtained result indicated that 2 wt% loaded Ru-based catalyst supported on ${\alpha}-Al_2O_3$ showed high activity in low temperature range and suppressed the methanation reaction. The developed prototype fuel processor showed thermal efficiency of 78% as a HHV basis with methane conversion of 92%. CO concentration below 10 ppm in the produced gas is achieved with separate preferential oxidation unit under the condition of $[O_2]/[CO]=2.0$. The partial load operation have been carried out to test the performance of fuel processor from 40% to 80% load, showing stable methane conversion and CO concentration below 10 ppm. The durability test for the daily start-stop and 8 h operation procedure is under investigation and shows no deterioration of its performance after 50 start-stop cycles. In addition to the system design and development.

• 한국응용과학기술학회지
• /
• 제20권3호
• /
• pp.230-236
• /
• 2003

Synthesis gas is commercially produced by a steam reforming process. However, the process is highly endothermic and energy-consuming. Thus, this study was conducted to produce synthesis gas by the partial oxidation of methane to decrease the energy cost. Supported Ni catalysts were prepared by the impregnation method. To examine the activity of the catalysts, a differential fixed bed reactor was used, and the reaction was carried out at $750{\sim}850^{\circ}C$ and 1 atm. The fresh and used catalysts were characterized by XRD, XPS, TGA and AAS. The highest catalytic activity was obtained with the 13wt% Ni/MgO catalyst, with which methane conversion was 81%, and $H_2$ and CO selectivities were 94% and 93%, respectively. 13wt% Ni/MgO catalyst showed the best $MgNiO_2$ solid solution state, which can explain the highest catalytic activity of the 13wt% Ni/MgO catalyst.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.45-50
• /
• 2004

The effects of reaction temperature and flow rate of reactants on the methane conversion, product selectivity, product ratio, and carbon deposition were investigated with 13wt% Ni/MgO catalyst. Reaction temperatures were changed from 600 to $850^{\circ}C$, and reactants flow rates were changed from 100 to 200 mL/mim. There were no significant changes in the methane conversion observed in the range of temperatures used. It is possibly stemmed from the nearly total exhaustion of oxygen introduced. The selectiveties of hydrogen and carbon monoxide did not largely depend on the reaction temperature. The selectivities of hydrogen and carbon monoxide were 96 and 90%, respectively. Carbon deposition observed was the smallest at $750^{\circ}C$ and the largest at $850^{\circ}C$. It is found that the proper reaction temperature is $750^{\circ}C$. The best reactant flow rate was 150 ml/min.

• 한국수소및신에너지학회논문집
• /
• 제32권1호
• /
• pp.68-76
• /
• 2021

Climate change problems occur during the use of fossil fuel and the process of biogas production. Research continues to convert carbon dioxide and methane, the major causes of climate change, into high-quality energy sources. in order to present the performance potential for the novel plasma-recuperative burner reformer, the reforming characteristics for each variable were indentified. The optimal operating condition of was an O2/C ratio of 1.0 and a total gas supply of 20 L/min. At this time, CH4 conversion was 64%, H2 selectivity was 39%, and H2/CO ratio was 1.13, which were the results applicable to the solid oxide fuel cell fuel stack for RPG, or Residential Power Generator. Recirculation of reformed gas increases the amount of H2 and CO, which are combustible gases, especially the amount of H2. As a result, the H2 selectivity is improved, and high-quality gas can be produced.

• 한국가스학회지
• /
• 제8권3호
• /
• pp.52-56
• /
• 2004

팔라듐 촉매는 주로 수소화 반응, 산화반응, 저온 연소반응 등에 사용된다. 특히 최근에 연료전지에 많이 시도되고 있는 알코올 등의 개질을 통한 수소가스의 발생을 할 경우에도 이 팔라듐 촉매의 가능성에 상당한 관심이 증폭되어 왔다. 귀금속 촉매인 팔라듐 촉매가 성능이 우수하지만 고가이고 내구성과 소성후의 성능저하 등이 해결해야 할 과제로 남아 있다. 본 연구에서는 내구성과 소성 후에도 성능의 저하가 없는 팔라듐 촉매를 합성하고 반응성을 연구하였다.

• 대한환경공학회지
• /
• 제30권12호
• /
• pp.1268-1272
• /
• 2008

부분산화가 적용된 저온플라즈마는 메탄으로부터 합성가스를 생산하는 기술이다. 저온 플라즈마 기술은 수증기 개질, 이산화탄소 개질을 이용한 개질기 보다 소형화와 시동특성이 우수한 장점을 가지고 있으며 다양한 분야에 적용이 가능하다. 본 연구에서는 GlidArc 방전을 이용한 저온플라즈마 개질기를 제안하였다. 개질 특성을 파악하고자 변수별 연구로서 가스 조성비율(O$_2$/CH$_4$), 수증기 주입량, 니켈과 철 촉매의 비교 및 이산화탄소 주입량에 대해 실험을 수행하였다. 최적의 수소 생산 조건은 O$_2$/C비가 0.64, 주입 가스유량은 14.2 L/min, 촉매의 반응기의 내부 온도는 672$^{\circ}C$, 주입 가스 량에 대한 수증기 유량 비율은 0.8 그리고 유입전력이 1.1 kJ/L일 때, 41.1%로 최대 수소 농도를 나타냈다. 그리고 이때 메탄의 전환율, 수소 수율 그리고 개질기 열효율은 각각 46.5%, 89.1%, 37.5%를 나타냈다.

• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.232-237
• /
• 2008

As the single chamber SOFC(SC-SOFC) showed higher prospect on reducing the operation temperature as well as offering higher design flexibility of SOFCs, lots of concerns have been given to investigate the catalytic activity of perovskite-type oxide in mixed fuel and oxidant conditions. Hence we thoroughly investigated the catalytic property of various perovskite-type oxides such as $La_{0.8}Sr_{0.2}MnO_3(LSM),\;La_{0.6}Sr_{0.4}CoO_3(LSC),\;La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3(LSCF),\;Sm_{0.5}Sr_{0.5}CoO_3(SSC),\;and\;Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}(BSCF)$ under the partial oxidation condition of methane which used to be given for SC-SOFC operation. In this study, powder form of each perovskite oxides whose surface areas were controlled to be equal, were investigated as functions of methane to oxygen ratios and reactor temperature. XRD, BET and SEM were employed to characterize the crystalline phase, surface area and microstructure of prepared powders before and after the catalytic oxidation. According to the gas phase analysis with flow-through type reactor and gas chromatography system, LSC, SSC, and LSCF showed higher catalytic activity at fairly lower temperature around $400^{\circ}C{\sim}450^{\circ}C$ whereas LSM and BSCF could be activated at much higher temperature above $600^{\circ}C$.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.344-351
• /
• 2005

수소에너지는 기존의 석유화학공업의 원료로서 뿐만 아니라 연료전지와 연계하여 소요량이 급속히 증가할 것으로 예측된다. 장기적으로는 재생에너지를 사용한 물 전기분해, 원자력을 이용한 수소 제조가 주목받고 있지만, 안정된 기술이 확보되기까지는 화석연료를 사용한 수소 제조법이 대용량 수소 제조법 중 가장 경제적인 것으로 분석되고 있다. 현재 화석 연료 중 천연가스를 이용한 수증기 개질 수소 제조법이 상업적인 공정으로 채택되고 있으나 $CO_2$ 분리 처리 비용이 경제성 평가에 중요한 항목으로 부각되고 있다. 따라서 천연가스를 이용한 수소 제조에도 다양한 공정이 제안되고 있으므로 천연가스를 원료로 한 수소 제조 기술의 개발 현황을 살펴보았다.

• 유기물자원화
• /
• 제14권4호
• /
• pp.93-103
• /
• 2006

바이오가스는 유기물의 혐기소화과정에서 생기는 부산물로 열에너지와 전기에너지로 사용되어왔다. 바이오디젤생산의 반응물과 연료로 사용되고 있는 메탄올의 수요는 꾸준히 증가하고 있다. 본 총설에서는 메탄올을 메탄올로 전환하는 직접부분산화법의 최근 발전 동향을 간략한 메탄올합성의 역사와 함께 다루었으며, 산업 규모에서 주로 사용되고 있는 증기개질반응과 현재 연구단계에서 발전하고 있는 촉매산화법을 비교하였다. 이 총설에서는 바이오가스로부터 메탄올전환의 가능성이 기술적인 측면과 경제적 실용성 면에서 제시되었다.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.29-35
• /
• 2013

A dense mixed ionic and electronic conducting ceramic membrane is one of the most promising materials because it can be used for separation of oxygen from the mixture gas. The $ABO_3$ perovskite structure shows high chemical stability at high temperatures under reduction and oxidation atmospheres. $BaCo_{1-x-y}Fe_xZr_yO_{3-{\delta}}$ (BCFZ) was well-known material as high mechanical strength, low thermal conductivity and stability in the high valence state. Glycine Nitrate Process (GNP) is rapid and effective method for powder synthesis using glycine as a fuel and show higher product crystallinity compared to solid state reaction and citrate-EDTA method. BCFZ was fabricated by modified glycine nitrate process. In order to control the burn-up reaction, $NH_4NO_3$ was used as extra nitrate. According to X-Ray Diffraction (XRD) results, BCFZ was single phase regardless of Zr dopants from y=0.1 to 0.3 on B sites. The green compacts were sintered at $1200^{\circ}C$ for 2 hours. Oxygen permeability, methane partial oxidation rate and hydrogen production ability of the membranes were characterized by using Micro Gas Chromatography (Micro GC) under various condition. The high oxygen permeation flux of BCFZ 1-451 was about $1ml{\cdot}cm^{-2}s^{-1}$. Using the humidified Argon gas, BCFZ 1-433 produced hydrogen about $1ml{\cdot}cm^{-2}s^{-1}$.