• Structural Engineering and Mechanics
• /
• 제31권1호
• /
• pp.57-74
• /
• 2009

Power signals resulting from spindle and feed motor, present a rich content of physical information, the appropriate analysis of which can lead to the clear identification of the nature of the tool wear. The partial least-squares regression (PLSR) method has been established as the tool wear analysis method for this purpose. Firstly, the results of the application of widely used techniques are given and their limitations of prior methods are delineated. Secondly, the application of PLSR is proposed. The singular value theory is used to noise reduction. According to grey relational degree analysis, sample variable is filtered as part sample variable and all sample variables as independent variables for modelling, and the tool wear is taken as dependent variable, thus PLSR model is built up through adapting to several experimental data of tool wear in different milling process. Finally, the prediction value of tool wear is compare with actual value, in order to test whether the model of the tool wear can adopt to new measuring data on the independent variable. In the new different cutting process, milling tool wear was predicted by the methods of PLSR and MLR (Multivariate Linear Regression) as well as BPNN (BP Neural Network) at the same time. Experimental results show that the methods can meet the needs of the engineering and PLSR is more suitable for monitoring tool wear.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.863-868
• /
• 2006

The partial least squares (PLS-1) calibration model based on spectrophotometric measurement, for the simultaneous determination of sulfite and sulfide is described. This method is based on the difference between the rate of the reaction of sulfide and sulfite with Malachite Green in pH 7.0 buffer solution and at 25 ${^{\circ}C}$. The absorption kinetic profiles of the solutions were monitored by measuring the decrease in the absorbance of Malachite Green at 617 nm in the time range 10-180 s after initiation of the reactions with 2 s intervals. The experimental calibration matrix for partial least squares (PLS-1) calibration was designed with 24 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.030-1.5 and 0.030-1.2 $\mu$g m$L ^{-1}$ for sulfite and sulfide, respectively. The proposed method was successfully applied to simultaneous determination of sulfite and sulfide in water samples and whole human blood.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권7호
• /
• pp.3145-3149
• /
• 2014

Gene expression profiling facilitates the understanding of biological characteristics of gliomas. Previous studies mainly used regression/variance analysis without considering various background biological and environmental factors. The aim of this study was to investigate gene expression differences between grade III and IV gliomas through partial least squares (PLS) based analysis. The expression data set was from the Gene Expression Omnibus database. PLS based analysis was performed with the R statistical software. A total of 1,378 differentially expressed genes were identified. Survival analysis identified four pathways, including Prion diseases, colorectal cancer, CAMs, and PI3K-Akt signaling, which may be related with the prognosis of the patients. Network analysis identified two hub genes, ELAVL1 and FN1, which have been reported to be related with glioma previously. Our results provide new understanding of glioma pathogenesis and prognosis with the hope to offer theoretical support for future therapeutic studies.

• Journal of the Korean Wood Science and Technology
• /
• 제49권3호
• /
• pp.213-225
• /
• 2021

본 논문에서는 열수 탄화(hydrothermal carbonization)에 의해 제조된 리그닌 하이드로차의 탄화 특성을 조사하였고, 근적외선 분광법과 부분 최소 제곱(partial least squares) 회귀를 이용하여 탄화 거동을 예측하기 위한 모델을 수립하였다. 온도 200℃에서 열수 탄화된 리그닌의 탄소 함량은 무처리 시료 보다 약 3 wt% 높았으며 가열 시간이 증가할수록 탄소 함량도 서서히 증가하는 경향이 나타났다. 열수 탄화는 리그닌을 더욱 탄소 집약적으로 변화시키고 마이크로 파티클을 제거하여 더욱 균질한 특성을 부여하였다. 근적외선 분광법과 부분 최소 제곱 회귀를 이용한 판별 및 예측 모델은 수열 탄화의 적용 여부를 완벽히 구분했으며 높은 정확도로 열수 탄화 리그닌의 탄소 함량을 예측하였다. 본 연구로부터 근적외선 분광법과 결합된 부분 최소 제곱 회귀 모델을 이용하여 열수 탄화에 의해 제조된 리그닌 하이드로차의 탄화 특성을 빠르고 비파괴적으로 예측할 수 있다는 것이 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.399-408
• /
• 2017

Research on the rapid and accurate prediction of physical properties of wood using near-infrared (NIR) spectroscopy has attracted recent attention. In this study, partial least squares analysis was performed between NIR spectra and air-dried specific gravity of five domestic conifer species including larch (Larix kaempferi), Korean pine (Pinus koraiensis), red pine (Pinus densiflora), cedar (Cryptomeria japonica), and cypress (Chamaecyparis obtusa). Fifty different lumbers per species were purchased from the five National Forestry Cooperative Federations of Korea. The air-dried specific gravity of 100 knot- and defect-free specimens of each species was determined by NIR spectroscopy in the range of 680-2500 nm. Spectral data preprocessing including standard normal variate, detrend and forward first derivative (gap size = 8, smoothing = 8) were applied to all the NIR spectra of the specimens. Partial least squares analysis including cross-validation (five groups) was performed with the air-dried specific gravity and NIR spectra. When the performance of the regression model was expressed as $R^2$ (coefficient of determination) and root mean square error of calibration (RMSEC), $R^2$ and RMSEC were 0.63 and 0.027 for larch, 0.68 and 0.033 for Korean pine, 0.62 and 0.033 for red pine, 0.76 and 0.022 for cedar, and 0.79 and 0.027 for cypress, respectively. For the calibration model, which contained all species in this study, the $R^2$ was 0.75 and the RMSEC was 0.37.

• 한국컴퓨터정보학회논문지
• /
• 제25권3호
• /
• pp.109-115
• /
• 2020

본 논문에서는 부분 최소 제곱(PLS) 회귀 모형을 이용한 인공지능(AI) 기술 분석을 제안한다. AI 기술은 이제 우리 사회의 대부분의 영역에 영향을 미치고 있다. 따라서 이 기술에 대한 정확한 이해가 필요하게 된다. AI 기술을 분석하기 위하여 전 세계 특허 데이터베이스로부터 AI 관련 특허 문서를 수집하고 텍스트 마이닝 기법을 사용하여 수집된 특허 문서에서 AI 기술 키워드를 추출한다. 본 연구에서는 추출된 AI 키워드 데이터를 PLS 회귀 모형으로 분석한다. 바이오정보학, 사회과학 및 공학 등 다양한 분야에서 고급 데이터 분석을 위하여 사용되는 PLS 회귀 모형은 부분 최소 제곱 기법을 기반으로 한다. 제안 방법의 성능을 확인하기 위하여 AI 특허 문서를 사용하여 분석 실험을 수행하고 제안하는 연구가 실제 문제에 어떻게 적용될 수 있는지 보여 준다. 본 논문은 AI 기술뿐만 아니라 다른 기술 분야에도 적용 할 수 있다.

• 한국산림과학회지
• /
• 제112권1호
• /
• pp.23-31
• /
• 2023

산림생산력의 예측은 지속가능한 산림경영이나 산림생태계서비스 증진을 위한 산림관리에 필수적인 것으로 알려져 있다. 본 연구는 전국 112개 신갈나무 임분을 대상으로 입지 및 토양 특성의 속성변수를 이용하여 지위 추정 모형을 개발하였다. 신갈나무 임분의 지위지수는 입지 및 토양 특성을 독립변수 한 일반최소제곱(Ordinary Least Squares, OLS) 및 부분최소제곱(Partial Least Squares, PLS) 회귀모형을 이용하여 유의적인 추정(P<0.05)이 가능하였다. 지위추정 회귀모형의 수정 결정계수(adjusted R²)는 입지 및 토양단면 속성변수의 회귀모형(A층: R²=0.29; B: R²=0.32)이, 토양 물리·화학적특성의 속성변수(A층: R²=0.09; B층: R²=0.21)보다 높게 나타났다. 한편, PLS 회귀모형(R²=0.20~0.32)은 OLS 회귀모형(R²=0.09~0.31)에 비해 지위지수 추정식의 설명력이 높았다. 본 연구로부터 신갈나무 임분의 입지 및 토양 특성을 이용한 지위 추정 회귀 모형이 개발되었으나, 결정계수 값이 낮아 회귀모형의 설명력을 향상시킬 수 있는 새로운 변수 개발이 필요할 것으로 사료되었다.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.647-651
• /
• 2004

Partial Least Squares (PLS) calibration performance has been systematically investigated by changing spectral resolutions of near-infrared (NIR) spectra. For this purpose, synthetic samples simulating naphtha were prepared to examine the calibration performance in complex chemical matrix. These samples were composed of $C_6-C_9$ normal paraffin, iso-paraffin, naphthene, and aromatic hydrocarbons. NIR spectra with four different resolutions of 4, 8, 16, and 32$cm^{-1}$ were collected and then PLS regression was performed. For PLS calibration, five different group compositions (such as total paraffin content) and six different pure components (such as benzene concentration) were selected. The overall results showed that at least 8$cm^{-1}$ resolution was required to resolve the complex chemical matrix such as naphtha. It was found that the influence of resolution on the PLS calibration was varied by the spectral features of a component.

• Journal of Biosystems Engineering
• /
• 제23권1호
• /
• pp.49-56
• /
• 1998

The objectives of this study were to develop models to predict the contents of moisture and protein of single kernel of brown rice based on visible/NIR (near-infrared) spectroscopic technique. The reflectance spectra of rice were obtained in the range of the wavelength 400 to 2,500 nm with 2 nm intervals. Multiple linear regression(MLR) and partial least squares (PLS) were used to develop the models. The MLR model using the first derivative spectra(10 nm of gap) with Standard Normal Variate and Detrending (SNV and Drt.) preprocessing showed the best results to predict moisture content of the sin린e kernel brown rice. To predict the protein content of a single kernel of brown ricer the PLS model used the raw spectra with multiplicative scatter correction(MSC) preprocessing over the wavelength of 1,100~1,500 nm.

• Computers and Concrete
• /
• 제13권2호
• /
• pp.173-185
• /
• 2014

Multivariate analysis is a statistical technique that investigates relationship between multiple predictor variables and response variable and it is a very commonly used statistical approach in cement and concrete industry. During model building stage, however, many predictor variables are included in the model and possible collinearity problems between these predictors are generally ignored. In this study, use of partial least squares (PLS) analysis for evaluating the relationships among the cement and concrete properties is investigated. This regression method is known to decrease the model complexity by reducing the number of predictor variables as well as to result in accurate and reliable predictions. The experimental studies showed that the method can be used in the multivariate problems of cement and concrete industry effectively.