• 대한치과보철학회지
• /
• 제60권4호
• /
• pp.412-419
• /
• 2022

부분 무치악 환자의 구강회복을 위해서는 임플란트를 이용한 치료 방법이 널리 활용되고 있다. 임플란트를 이용한 치료방법은 크게 고정성 임플란트 보철물과 가철성 임플란트 보철물로 나뉠 수 있으며, 골 흡수가 심한 환자의 경우 심미적이고 경제적인 이점을 갖는 가철성 임플란트 보철물이 치료 옵션으로 활용될 수 있다. 특히 소수의 임플란트에 Milled-bar와 부가적인 유지장치를 이용한 보철물 제작 시, 임플란트 고정체 간의 연결고정 효과 및 의치의 유지력과 안정성이 증가할 수 있다. 또한 의치상을 통한 구순 지지를 통해 심미적인 보철물 제작이 가능하다. 본 증례의 환자는 상악골의 심한 골 흡수를 동반한 소수의 잔존치를 갖는 부분 무치악 환자로 전치부 및 소구치부위에 임플란트를 3개 식립 후 캐드캠을 이용하여 제작된 Milled-bar와 ADD-TOC 어태치먼트를 이용한 임플란트 부분 피개의치로 치료하였다. 그 결과 어태치먼트를 이용한 clasp 제거 및 의치상을 이용한 구순 지지를 통해 심미성을 높였으며, Milled-bar를 통한 교합력 지지와 의치 안정성을 확보하였다. 또한 환자의 이물감 해소를 위해 구개부 피개량을 줄인 금속 구조물의 피개의치를 제작하였으며, 만족스러운 결과를 얻었기에 보고하는 바이다.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.493-502
• /
• 2003

Statement of problem : Removable partial denture and complete denture often require denture base relines to improve the fittness against tissue-bearing mucosa because of the gradual change in edentulous ridge contour and resorption of underlyng bony structure. Self-curing hard reline resins offers the immediate and relatively inexpensive means to be recondition the surface of denture base directly However weak bond between denture base resin and reline material can harbor bacteria, promote staining, or result in complete separation of the two materials. Purpose : The purpose of this study was to evaluate the effect of denture cleansers on bond strength and surface hardness of reline resin to denture base resin Denture base resin beams($60.0{\times}15.0{\times}3.0mm$) were made with Lucitone 199. Material and methods : 10mm section was removed from the center of each specimen. The samples were replaced in the molds and the space of l0mm sections were packed with Tokuso Rebase reline material. The specimens were immersed in denture cleansers (Polident, Cleadent) and were evaluated after 1 week, 2 weeks, and 4 weeks. The bond strength and surface hardness of self-curing hard reline materials to heat-curing denture base resin were measured using an UTM (universal testing machine). Results and conclusion : 1) There was no significant difference of usage, kind, and denture cleaner by application time on the bonding strength of self-curing hard reline resin to denture base resin. 2) There was no significant difference of usage, kind, and denture cleaner by application time on the surface hardness, but the surface hardness showed decreasing tendency, as the time of immersion was extended. 3) The failure modes of the specimens was initially adhesive failure and finally cohesive failure of self-curing hard reline resin.

• 대한치과보철학회지
• /
• 제43권2호
• /
• pp.218-231
• /
• 2005

Statement of problem. In the partially edentulous patients, removable partial dentures have been working as a important treatment modality. Clasps, a kind of direct retainers, received some amount of stresses during the insertion and removal of partial denture on the abutment tooth. Purpose. The study is to investigate stresses of the different clasps. Material and methods. In order to investigate the degree of stresses, maxillary partial edentulism (Kennedy Class II modification I) was assumed and removable partial dentures were designed on it with three kinds of metallic materials; cobalt-chromium alloy, type IV gold alloy and commercially pure (c.p.) titanium. Aker's clasp was applied on the left second molar. RPA (mesial rest-proximal plate-Aker's) clasp was on the left first premolar and wrought wire clasp was on the right first premolar. Three dimensional, non-linear, dynamic finite element analysis method was run to solve this process. Results. 1. Cobalt-chromium alloy had the highest von Mises stress value and c.p. titanium had the lowest one irrespective of the types of clasps. 2. In the Aker's clasps, stress on the retentive tips was shown shortly after the appearance of stresses of the middle and minor connector areas. These time lag was much shorter in the RPA clasps than in the Aker's clasp. 3. In general. retentive tips of wrought wire clasps had much less amount of stress than other clasps. Conclusion. The amount of stress was the highest in the RPA clasp and the lowest in the wrought wire clasp, in general.

• 대한치과보철학회지
• /
• 제55권3호
• /
• pp.325-330
• /
• 2017

단일 치아 상실 시 전부피개관을 유지장치로 사용하는 고정성 보철이나 임플란트를 이용한 치료가 우선적으로 선택되어 사용되고 있다. 하지만 전부 피개관 지대치 형성을 위해서는 건전한 치질을 많이 삭제해야 한다는 단점이 있다. 임플란트의 경우 인접 치아의 손상을 피할 수 있으나 환자의 구강 상태와 전신 상태에 따라 불가능하거나 일정기간 연기해야 하는 경우도 있다. 본 증례에서는 최소한의 치질 삭제로 젊은 환자와 치은 퇴축이 있는 환자의 단일 치아 상실을 수복하기 위해 레진 접착 고정성 보철물을 선택하였다. 모든 환자들이 심미적, 기능적으로 만족하였기에 이를 보고하는 바이다.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.133-137
• /
• 2014

PURPOSE. The purpose of this study was to evaluate the patients' knowledge on dental implants in a Turkish subpopulation. MATERIALS AND METHODS. Five hundred twenty seven Turkish adults referred to Yeditepe University Faculty of Dentistry, Istanbul, Turkey, were presented with a questionnaire including 20 questions regarding the level of information and awareness about the dental implants. The data were collected and statistical analyses were performed with Chi square test to compare the descriptive data. RESULTS. Among 527 subjects, 54% were female and 46% were male with a mean age of 42.2 years. The rate of patients' implant awareness was 27.7%. When the patients were questioned about the treatment options for rehabilitation of tooth missing, 60.9% of patients were informed about fixed partial denture, followed by conventional complete denture (32.5%) and removable partial denture (24.9%). Six percent reported that they were very well informed about the dental implants whereas 48.2% were poorly informed. The information sources of the implants were from the dentist (44.5%), printed media (31.6%) and friends and acquaintances (17.3%), respectively. Sixteen percent of the population believed that their implants would last forever. CONCLUSION. The dentists should give more detailed information to the patients about dental implants and tooth-supported fixed partial dentures in the future.

• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.165-169
• /
• 2014

Purpose: This study is a mechanical strength supplementation of denture base resin Polymethyl methacrylate (PMMA) is in general use for denture base resin of the partial and full denture, however, The polymerization process of PMMA is not stabilized. Because of compatibility problems, preceding studies were performed, which were enhancing mechanical strength(Camilo Machado 2007),(Ana M. 2008), addition filler to materials property(Ayse Mese, 2008), self curing method(Hiroshi Shimizu, 2008). Methods: The carbon fiber and polyacetal filler, reinforced the mechanical strength for improving the stability of denture base resin were supplemented to the self cured resin. The Modulus of elasticity and the restoring force were calculated by tensile test. Results: The strengths of the heat and self cured resin were respectively decreased and increased, when the filler was supplemented to the denture base resin and the modulus of elasticity of both heat and self cured resin were not increased, when the filler was supplemented to the denture base resin. Conclusion: The restoring forces of self cured resin containing 10% filler were increased, when the filler was supplemented to the denture base resin.

• 대한치과의사협회지
• /
• 제52권6호
• /
• pp.346-353
• /
• 2014

Currently, computer-aided technology becomes one of main issues in clinical dentistry. About 25 years ago, the development of dental CAD/CAM systems for the fabrication of crowns and fixed partial dentures leads to be able to fabricate complete denture today. The fabrication of milled complete denture prostheses with digital scanning technology may decrease the number of patient appointments. However, the precise tooth arrangement and evaluation by patient is not promising relatively. The purpose of this review was to analyze the existing literature on computer aided technology for fabricating complete denture with historical background, current status, and future perspectives. In addition, two available commercial systems were introduced.

• 대한치과보철학회지
• /
• 제59권4호
• /
• pp.515-522
• /
• 2021

소수의 잔존치가 존재하는 경우 소수의 임플란트를 추가적으로 식립하여 의치의 유지, 지지, 안정을 확보하는 임플란트 융합 국소의치 및 피개의치의 성공적인 증례가 보고되고 있다. 임플란트 융합 국소의치는 임플란트를 포함한 지대치에 가해지는 측방력을 최소화할 경우 의치의 수평적, 회전적 움직임이 현저하게 줄어들고 의치의 탈락 및 안정의 불편감을 호소하는 환자에서 주소를 크게 개선할 수 있는 효과적인 치료법으로 제안되고 있다. 본 증례는 소수의 임플란트를 식립하여 상악에 임플란트 지지 서베이드 금관을 제작하고 하악에 Locator^® attachment를 통해 의치의 유지, 안정, 지지를 개선하였다. 임상 관찰에서 환자가 최종 의치 장착 후 기능적, 심미적 면에서 모두 만족하였기에 보고하는 바이다.

• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.54-63
• /
• 2024

장기간 사용된 임플란트 피개의치는 부착장치의 마모와 전치부 교합집중, 인공치 파절, 의치의 회전 등을 보일 수 있다. 이러한 문제점은 추가적인 임플란트 식립을 이용한 임플란트보조 국소의치(IARPD, implant assisted removable partial denture)로의 전환으로 개선할 수 있다. 본 증례는 임플란트 피개의치를 사용하는 3급 악간관계 환자에서 전치부에 집중된 교합을 분산하고 의치의 회전방지를 위해 서베이드 크라운을 이용한 IARPD으로 전환하였다. 여러 단계의 임시수복물을 통해 적절한 기능과 심미를 가진 최종보철물의 형태를 결정하였으며 최종 보철물의 적절한 구치부 교합과 임플란트 주위 변연골 유지를 보였기에 이를 보고하는 바이다.

• 대한치과보철학회지
• /
• 제25권1호
• /
• pp.55-69
• /
• 1987

The purpose of this study was to evaluate the stress distributions of the fixed partial denture with five unit intermediate abutment. This fixed partial denture was attached to a three dimensional photoelastic epoxy resin model. Three dimensional photoelastic models were used, with the stress areas recorded photographically. A vertical load was applied to the second molar, which is the most posterior abutment of the fixed partial denture. Similarly, a vertical load was applied to the first molar because this tooth receives the heaviest masticatory load. These loads were added to two types of fixed partial denture. the rigid connector, and the nonrigid connector which was connected on the distal side of the intermediate abutment by a key and keyway device. After the stress patterns in surrounding tissues were observed, the following conclusions were as follows: 1. When the vertical load was applied to the first and second molars on the occlusal surfaces, the surrounding tissues of the roots of the canine, the second premolar, and the second molar were all compressive stresses. 2. When the vertical load was applied on the occlusal surface of the second molar, the tissue surrounding the roots of the canine, the second premolar, and the second molar all showed more stresses with the nonrigid connector than with the rigid connector. 3. When the vertical load was applied to the occlusal surface of the first molar, the stress concentration on the canine and the second molar was similar, whether the rigid or nonrigic connectors were used. However, on the second premolar, the stress concentration shown by the nonrigid connector was noticeably more than that shown by the rigid connector. 4. Whether the rigid or nonrigid connectors were used, when the load was placed on the first molar, the stress concentration on the canine and the second premolar was greater than that observed for the second molar. When the load was placed on the second molar, the load affected the second molar more than the canine and the second premolar.