• The Plant Pathology Journal
• /
• 제26권4호
• /
• pp.321-327
• /
• 2010

We performed diagnostic PCR assays and a phylogenetic analysis using partial sequences of TEF1 (translation elongation factor-1) to determine the trichothecene chemotypes and genetic diversity of F. graminearum isolates from maize and rice samples collected in 2009 in Korea. PCR using a species-specific primer set revealed a total of 324 isolates belonging to the putative F. graminearum species complex. PCR with trichothecene chemotypespecific primers revealed that the nivalenol (NIV) chemotype was predominant among the fungal isolates from rice (95%) in all provinces examined. In contrast, the predominant chemotype among the corn isolates varied according to region. The deoxynivalenol (DON) chemotype was found more frequently (66%) than the NIV chemotype in Gangwon Province, whereas the NIV chemotype (70%) was predominant in Chungbuk Province. Phylogenetic analysis showed that all DON isolates examined were clustered into lineage 7, while the NIV isolates resided within lineage 6 (F. asiaticum). Compared with previous studies, the lineage 6 isolates in rice have been predominantly maintained in southern provinces, while the dominance of lineage 7 in maize has been evident in Gangwon at a slightly reduced level.

• 한국산업융합학회 논문집
• /
• 제14권4호
• /
• pp.151-156
• /
• 2011

The domestic mine development community the countermeasure establishment is insufficient about ground sinkage, not only the mine which is a in line is partial from the mine of the most which has become the rest mine and abandoned mine or the index sinkage occurs. The ground sinkage which occurs from the abandoned mine area most after operation is stopped, a long time passes and accurately predicts an occurrence location and a time with the residual sinkage which occurs, is difficult. Underground goaf of the abandoned mine and the closed shaft When considering the potentiality which causes the instability of ground, is a possibility of reaching a damage in the ground infrastructure or life. The underground shaft which is formed specially with mine development and goaf operates with the obstacle factor in the development project of the mine area, the ground sinkage which is caused by with sinkage, operates with the large safety accident occurrence factor where the important infrastructure of the railroad, road, residential area etc. is damaged. Therefore, In this paper, the goaf cave of the abandoned mine area, for the displacement behavior according to the filling factor of the material is to analyze the numerical analysis.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.41-44
• /
• 1990

There is the need to balance safety, economy and serviceability in all phases of society proboems. This is especially true in structural code formulation, where a framework is established by which practicing structural enginers can be assured of designing structures that reasonably meet the above three objectives. The existeing design codes, which are generally based on the structural theory and certain engineering experience, do not realistically consider the uncertainties of loads and resistances and the basic reliability concepts. The purpose of the present study is therefore to develop the realistic reliablility-based design criteria to secure adequate safety and reliability, and to derive the models for partial and combined resistance factor formats.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.75-82
• /
• 2005

사면 안정해석은 현장 조사로부터 얻어지는 지반강도 정수의 역할이 매우 중요한 인자로 작용한다. 본 연구에서는 사면안정성 분석에서 입력변수들에 대한 상대적인 평가를 위하여 민감도 분석을 수행하였다. 설정된 입력 변수들은 사면의 경사, 점착력, 내부마찰각의 3가지 종류로 선별하였다. 사면안정해석은 기본적으로 한계평형으로 해석하였으며 수집된 현장자료를 이용하여 분석한 결과 확률변수들은 정규분포를 나타내는 것으로 나타났다. 몬테카를로 시뮬레이션을 이용하여 입력변수들을 발생시켰으며 붕괴된 암반사면을 이용하여 민감도 분석을 실시하였다. 분석결과 암반사면의 안전율은 예상보다 낮게 나타나는 것을 알 수 있었다. 민감도 분석 지수(PCC)를 이용하여 분석한 결과 사면 안전율에는, 점착력과 사면 경사가 매우 민감한 영향을 미치는 것으로 나타났으며 내부마찰각은 상대적으로 낮은 민감성을 띠는 것으로 분석되었다.

• Structural Engineering and Mechanics
• /
• 제47권5호
• /
• pp.643-660
• /
• 2013

In the present work, the capacity ratings of steel truss bridges have been carried out incorporating dynamic effect of moving vehicles and its accumulating effect as fatigue. Further, corrosion in the steel members has been taken into account to examine the rating factor. Dynamic effect has been considered in the rating procedure making use of impact factors obtained from simulation studies as well as from codal guidelines. A steel truss bridge has been considered to illustrate the approach. Two levels of capacity ratings- the upper load level capacity rating (called operating rating) and the lower load level capacity rating (called inventory rating) were found out using Load and Resistance Factor Design (LRFD) method and a proposal has been made which incorporates fatigue in the rating formula. Random nature of corrosion on the steel member has been taken into account in the rating by considering reduced member strength. Partial safety factor for each truss member has been obtained from the fatigue reliability index considering random variables on the fatigue parameters, traffic growth rate and accumulated number of stress cycle using appropriate probability density function. The bridge has been modeled using Finite Element software. Regressions of rating factor versus vehicle gross weight have been obtained. Results show that rating factor decreases when the impact factor other than those in the codal provisions are considered. The consideration of fatigue and member corrosion gives a lower value of rating factor compared to those when both the effects are ignored. In addition to this, the study reveals that rating factor decreases when the vehicle gross weight is increased.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권1호
• /
• pp.19-23
• /
• 2000

Partial discharges(PD)in air insulated electric power apparatus often lead to deterioration of solid insulation by electron bombardments and electrochemical reaction. The PD caused to reduce the life time of power apparatus and to increase power losses. Thus understanding and classification of PD patterns in air are very important to discern sources of PD. In this paper, PD in air by using statistical methods was investigated. We classified air discharges, corona, surface discharges and cavity discharges by Kohonen network. For classification of PD patterns, we used statistical operators and parameters such as skewness$(S^+,\; S^-),\; kurtosis(K^+, K^-),\; mean phase(AP^+, AP^-)$, cross-correlation factor(CC) and asymmetry derived from the mean pulse-height phase distribution$(H_{avg}(\phi))$, the max pulse-height phase distribution $(H_{qmax}(\phi))$, the pulse count phase distribution $(H_n(\phi))$ and the pulse height vs. Repetition rate $(H_q(n))$.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1090-1097
• /
• 2008

This study conducted the decision method of lateral flow in abutment structures founded on the soft soils and the reliability analysis on the foundation pile for abutment. On the basis of the results, this study proposed the reliability design model. Reliability analysis was conducted by applying second moment method, point estimation method, and expected total cost minimization to lateral movement index, lateral movement decision index, modified lateral movement decision index, and circular failure safety factor for the decision criteria of lateral flow. The reliability index by analysis method had a similar tendency each other. Point estimation method was found as a practical method in the aspect of convenience because it could conduct the analysis only by mean and standard deviation as well as the partial derivative on random variables was not necessary. Optimum reliability index and optimum safety according to increasing in failure factors and load ratio were analyzed and loads and resistance factors of the design criteria of optimum reliability were estimated. It presented rational design model which can consider construction level and stability and economical efficiency overall.

• Archives of Pharmacal Research
• /
• 제20권3호
• /
• pp.218-224
• /
• 1997

Platelet-activating factor (PAF) acetylhydrolase, which removes the acetyl moiety at the sn-2 position, has been found in human amniotic fluid. We purified this enzyme by ammonium sulfate precipitation, and sequential use of DEAE-Sepharose CL-6B, hydroxyapatite, chelating-Sepharose, and Mono Q column chromatographies. This enzyme exhibited broad pH optima and was unaffected by EDTA. Partially purified enzyme had a molecular weight of approximately 34 kDa on SDS-PAGE. In addition, the enzyme activity was inhibited by either diisopropylfluorophosphate(DFP) or p-bromophenacylbromide (p-BPB), suggesting that this enzyme possesses active serine and histidine residues. The enzyme showed similar activity towards PAF and oxidatively modified phosphatidylcholine, but didn't hydrolyze phosphatidylcholine or phosphatidylethanolamine with a long chain fatty acyl group at sn-2 position.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.73-82
• /
• 1996

하중과 저항계수 설계론을 채택하는 극한상태 설계 법이 지반공학분야에도 세계적인 추세로 적용되고 있다. 현재의 허용응력설계법은 논란을 거듭하면서 극한상태 설계법으로 교체되리라 전망된다. 최근에 북미와 유럽에서 시방서로 발간되면서 본격적으로 지반공학설계분야에 관심이 되고 있다. 이러한 세계적인 설계이론을 적절히 비교분석함은 장차 한국의 건설여건에 맞도록 적용하는데 기본요건이라 하겠다. 본 논문에서는 극한상태설계 법을 검토하고 말뚝설계에 하중과 저항계수 설계론을 적용하여 분석하고자 한다.

• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.77-89
• /
• 2004

한계상태설계법은 구조분야에서는 일반화되어 있으나 지반분야에서는 비교적 새로운 설계법으로 최근 세계적으로 지반구조물의 설계에도 보다 합리적 인 설계를 위하여 한계상태설계법을 적용하려는 추세에 있다. 본 연구에서는 미국, 캐나다, 유럽의 다양한 한계상태설계 시방서들을 수집하여 각국의 시방서들에서 제시된 부분안전계수(하중계수와 저항계수)들을 조사하고, 간단한 FOSM(first order second moment) 신뢰도 해석을 통하여 설계에 이용되는 대표적인 하중들에 대한 하중계수와 기초 지지력에 대한 저항계수를 산정하였다. 기초 설계시 하중계수 및 하중조합은 상부 구조물의 설계에 사용된 조건을 그대로 사용하는 것이 설계의 효율화를 위해 바람직할 것이다. FOSM 해석결과, 산정된 하중계수들은 대부분 시방서의 하중계수들과 비슷한 범위를 나타내었으나, 기초 지지력에 대해 산정된 저항계수는 지반설계요소에 대한 전반적으로 높은 변동계수값으로 인해 전체적으로 시방서보다 낮은 범위를 나타내었다. 지반의 지지력은 매우 다양한 불확실 요소들을 포함하며 해석방법마다 내재된 불확실성의 정도가 다르므로 지지력 산정방법마다 다른 저항계수값이 적용되어야 하며 이를 위해 우선적으로 각 방법에 포함된 개개의 불확실 요소를 포함, 전체 지지력에 대한 불확실성의 정량화를 위한 노력이 필요하다.