• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.41-44
• /
• 1990

There is the need to balance safety, economy and serviceability in all phases of society proboems. This is especially true in structural code formulation, where a framework is established by which practicing structural enginers can be assured of designing structures that reasonably meet the above three objectives. The existeing design codes, which are generally based on the structural theory and certain engineering experience, do not realistically consider the uncertainties of loads and resistances and the basic reliability concepts. The purpose of the present study is therefore to develop the realistic reliablility-based design criteria to secure adequate safety and reliability, and to derive the models for partial and combined resistance factor formats.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.142-144
• /
• 2005

To detect partial discharge of 154kV joint box, we have made experiment by using the Al-foil electrode sensor. Generally the signals which are detected in partial discharge test of underground power transmission cable are accompanied wi th both noises of high voltage and noises of surrounding power cable. The most noise in near to end part of joint box is corona, beside other noises flowed from surrounding area. Partial discharge test is difficulty due to these noises. First, we had used Al-Foi1 sensor on middle joint box of 154[kV] underground transmission power cable, and then analyzed reliability of calibration signal by using the Al-Foi1 electrode sensor of NJB. From above results, decrement properties measured highly. But incase of injecting calibration signal of 500[pC] after measuring signals in IJB, the S/N ratio had about 25[dB] acquisition.

• 전기학회논문지
• /
• 제65권8호
• /
• pp.1436-1441
• /
• 2016

Currently, partial discharge diagnosis in the field of prevention applied technology and diagnostic equipment is a possible strong limit to remove the noise generated by external or internal I still have one unreliable diagnosis. This technology is the noise removal from signal the time lag analysis algorithms technique is applied by a fundamental. Increasing the reliability in terms of technology spectrum frequence of analysis method for by applying the acquisition through the position of the frequency content and sources of traffic lights partial discharge of the acquisition of signal analysis to judge whether a way diagnosis the environment of the scene, and conditions. Partial discharge signal and make the discharge while building blocks were found through the Analysis. Spectrum frequence of Analysis and wide discharge part, to be more precise, in line with the various functions, including the analysis technique band. Diagnosis and comes up with advanced technology that can detect the presence of a position. This method is portable single device developed for maintenance and mobility and ease and convenience of getting caught by discharge of the pattern analysis and position detection method suitable for a new diagnosis will suggest.

• Tribology and Lubricants
• /
• 제29권1호
• /
• pp.13-18
• /
• 2013

Slider bearing is a widely used load-carrying element in the industry. While a large number of studies have investigated the effect of overall surface curvature, very few have considered sinusoidal surface. Recently, consideration of surface roughness/waviness or intentional wave design has been identified as an important issue in the manufacture of hard disk driver, mechanical seal, hydraulic machine, and etc. This study investigated the load-carrying capacity of a finite-width slider bearing with a wavy surface. Film thickness ratios, length-width ratio, ambient pressure, amplitude, and partial distribution were selected as the simulation parameters. The calculation results showed that the load-carrying capacity rapidly varied at small film thickness ratio, but the waviness near the area of minimum film thickness made much more influence with an increase in film thickness ratio. As the length-width ratio of bearing was increased, ambient pressure became more influential at small film thickness ratios. Furthermore a particular partial distribution of the wavy area led to higher load-carrying capacity than did the whole distribution. Consequently, the results of this study are expected to be of use in surface micro-machining of finite-width slider bearings.

• 한국강구조학회 논문집
• /
• 제19권4호
• /
• pp.395-402
• /
• 2007

허용응력설계법과 강도설계법으로 설계된 강합성 플레이트 보강형과 콘크리트 보강형으로 구성된 장대교량인 복합사장교의 확률적 위험도 평가를 수행하였다. 최대 축력, 전단력 및 정 부모멘트 발생단면에 기초한 위험단면에 대해 AFOSM 알고리즘과 시뮬레이션기법을 사용하여 케이블, 주탑, 보강형 및 강-콘크리트 접합부의 요소신뢰성을 평가하였다. 체계신뢰성해석을 위해, 케이블, 주탑 및 콘트리트와 강합성 보강형으로 구성된 복합사장교의 시스템을 조합 파괴모드로 모델링하였으며, 이를 통해 전체 구조시스템의 파괴확률과 신뢰성지수를 산출하였다. 본 연구를 통해 복합사장교의 거동특성에 기초한 파괴모드를 제안하였고 위험도평가 방법으로서 부분 ETA기법의 효용성을 확인하였다.

• 대한산업공학회지
• /
• 제41권4호
• /
• pp.396-407
• /
• 2015

The literature about intelligence assets allocation focused on mainly single or partial assets such as TOD and GSR. Thus, it is limited in application to the actual environment of operating various assets. In addition, field units have generally vulnerabilities because of depending on qualitative analysis. Therefore, we need a methodology to ensure the validity and reliability of intelligence asset allocation. In this study, detection probability was generated using digital geospatial data in MGIS (Military Geographic Information System) and simulation logic of BCTP (Battle Commander Training Programs) in the R.O.K army. Then, the optimal allocation mathematical model applied concept of simultaneous integrated management, which was developed based on the partial set covering model. Also, the proposed GA (Genetic Algorithm) provided superior results compared to the mathematical model. Consequently, this study will support effectively decision making by the commander by offering the best alternatives for optimal allocation within a reasonable time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.95-96
• /
• 2008

We constructed an on-line PD monitoring system for the 380kV U/G Cable project at the Riyad 9012 substation in Saudi-arabia. The system will be monitoring the termination of the two 380kV XLPE Cables to prevent unexpected failure of the cable insulation. The system had been tested in the laboratory and on-site for detection of various PD signals and reliability of operation. The system distinguish the existence and nonexistence of the partial discharge and then judge the source of partial discharge using automatic PD pattern recognition software.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.290-295
• /
• 1999

This paper describes Trans-less type utility interactive system that is combined with buck/boost chopper applying partial resonant method, which remove Trans, and high efficient PWM inverter. Therefore, it is possible to make it lightweight, to cut down the cost, and to improve its reliability. What the merits of this system are that we con transmit arbitrary power to load and utility regardless of generating voltage magnitude and we can always obtain high factor controlling by equal phase signal with utility.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1915-1917
• /
• 2000

Laboratory experiments and on site measurements were conducted to detect partial discharges in GIS(Gas Insulated Switchgear) using the UHF(Ultra High Frequency) technique that has been applied many places in the world. Experimental results were in good agreement with calculation in locating a partial discharge source using mock-up GIS. Defect type and its location were inferred after a measurement on 345 kV GIS that showed some abnormal phenomenon. Precise examination inside the GIS coincided with the results inferred from the measurement. High reliability of UHF technique for site application was confirmed.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2008년도 발표논문집
• /
• pp.148-151
• /
• 2008