• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2533-2542
• /
• 1994

This paper suggests a simple approach to determining the screw characteristics for a three0dimensional flow in a channel with a finite aspect ratio(ratio of a width to a depth, W/H) by introducing a Total Shape Factor($F_t$) to correct a two-dimensional flow analysis for a channel with an infinite aspect ratio. In the present study, the Total Shape Factor($F_t$) was defined as a ratio of a net flow rate obtained by the three-dimensional analysis to that by the two-dimensional analysis. In the proposed approach, the quantity, $ \frac{{\partial}F_t}{\partial(H/W)}$ turns out to be almost constant and to play an important role in understanding the effects of the flights. Therefore, $ \frac{{\partial}F_t}{\partial(H/W)}$ are extensively reported in this paper in terms of several dimensionless parameters. This simple approach with such database will be very useful for extruder designers to predict the screw characteristics.

• Composites Research
• /
• 제12권2호
• /
• pp.26-35
• /
• 1999

모달변형에너지법과 조화진동해석법을 이용하여 겹침이음부와 부분층댐버를 갖는 보에 대해 유한요소모델을 설정하고 진동감쇠특성을 연구하였다. 모달변형에너지법과 조화진동해석법으로 구한 계의 공진주파수와 손실계수는 거의 같은 값ㅇ르 보였으며, 형상의 변화에 따른 손실계수 변동경향은 이론해석에 의한 결과와 유사하였다. 부분층댐퍼의 위치, 점탄성층과 보강탄성층의 두께 및 탄성계수의 변화가 계의 손실계수에 미치는 영향을 파악하였으며, 점탄성층의 손실계수변화에 따른 영향도 검토하였다. 이들 결과로부터 계의 감쇠효과를 극대화하기 위한 구조물의 형상 및 물성조건을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.88-89
• /
• 2007

ZnO thin films were deposited on $Al_2O_3$ (alumina) substrates by pulsed laser deposition (PLD) using Nd:YAG laser with a wavelength of 355nm, at room temperature and oxygen partial pressure of 1, 10, 30, 50, 100, and 200m Torr. Furthermore, deposited ZnO thin films were post-annealed at 400, 550, $600^{\circ}C$. The effects of oxygen partial pressure and post-annealing temperature on structural properties of the deposited films have been investigated by means of X-ray diffraction (XRD), and atomic force microscope (AFM), respectively. It has been found that ZnO thin films exhibit c-axis orientation, exhibiting an increased foil width at half maximum (FWHM) value of (002) diffraction peak at 30m Torr oxygen partial pressure and higher post-annealing temperature ($700^{\circ}C$).

• Journal of Ecology and Environment
• /
• 제35권4호
• /
• pp.343-349
• /
• 2012

The use of growth medium is often recommended milkweed seedlings to grow and develop after emergence, and it is affected by growth medium and local habitat conditions. The effects of growth medium and partial shade on early growth of milkweed under drought stress (Calotropis procera L.) were studied in a field experiment. A split-split plot experimental design with three replications was carried out in the nursery. The main treatment plot was divided into two levels of shade; (no shading and partial shading). Sub treatment plot1 included growth medium at four levels (G1 = clay [suitable for milkweed growth], G2 = clay + sand, G3 = clay + perlite, G4 = clay + perlite + sand) and sub treatment plot2 included drought (irrigation intervals) at six levels (D1 = 2 [control], D2 = 4, D3 = 6, D4 = 8, D5 = 10, and D6 = 12 days per for three month). The results showed that drought stress significantly decreased emergence percentage, shoot length, shoot dry weight (SDW1), root dry weight (RDW), seedling dry weight (SDW2) and vigor index (VI). The use of growth medium increased all seedling characteristics. The G3 (clay + perlite) growth medium showed the highest performance, especially in terms of emergence percentage and seedling dry weight. Partial shade improved shoot length, shoot dry weight, and vigor index. Our results showed that the best treatment for high-vigor milkweed seedlings under drought stress was G3 (clay + perlite) growth medium and partial shade.

• 한국환경과학회지
• /
• 제20권8호
• /
• pp.1041-1048
• /
• 2011

The purpose of this study was to analyze the effects on meteorological variables in Seoul, Busan and Jeju during the partial solar eclipse event of 22 July 2009 in Korea. Solar irradiance decreased 16 and 19 minutes after eclipse in Seoul and Busan, and 6 minutes before eclipse in Jeju. Minimum solar irradiance occurred 7 and 3 minutes after maximum eclipse in Seoul and Busan, respectively, and 8 minutes before maximum eclipse in Jeju. Solar irradiance began to increase after maximum eclipse in Seoul and Busan, and recovered to the original state as eclipse ended. On the other hand, recovery of solar irradiance after maximum eclipse in Jeju was slower than those of two cities. Temperature drop due to partial solar eclipse were $0.7^{\circ}C$, $4.0^{\circ}C$, $1.5^{\circ}C$ in Seoul, Busan, and Jeju, respectively, and time needed to arrive minimum temperature from maximum eclipse were each 12, 32, 30 minutes, respectively. Change of relative humidity during partial solar eclipse were 2.6%, 17.4%, 12.3% in Seoul, Busan, and Jeju, respectively. Temperature drop turned out to be sharper as altitude increases. Wind speed decreased by each about 1.1 m/s, 3.4 ms/s, 1.4 ms/s due to partial solar eclipse in Seoul, Busan, and Jeju. Soil temperature of 5 cm equally decreased by $0.2^{\circ}C$ in Seoul and Busan, soil temperature of 10 cm maintained almost constant, and soil temperature of 20 cm was hardly affected by eclipse.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.70-77
• /
• 1999

Surface depression in the arc welding is calculated numerically to analyze its influence on pool convection and oscillation. The magnitude of surface depression due to arc pressure on the stationary GTA pool surface is relatively small, and fluctuations of the surface and velocity are caused mainly by arc pressure. The inward flow on the surface due to the electromagnetic force and positive surface tension gradient acts to decrease surface depression. Surface depression appears to have minor effects on average flow velocity and thus pool geometry. Pool oscillation occurs due to surface vibration, and oscillation frequencies are affected mainly by the surface tension and pool width. The input parameters such as arc pressure and current have negligible effects on the oscillation frequency, and the surface tension gradient has limited effects. Since the oscillation frequency varies slightly according to penetration, pool oscillation for the partial penetration weld pool is applicable to monitor the pool width.

• Korean Journal of Acupuncture
• /
• 제25권1호
• /
• pp.247-257
• /
• 2008

Objectives : The warm needling technique is the method in combining the effects of acupuncture needle with the effects of moxibustion. We need to standardize the characteristics of the warm needling technique in order to get more systematic and objective result in operation mechanism and effects and then get more clinical abilities in these fields. Methods : In this study, using of labview system on the warm needling technique we studied about measurement and comparison with partial temperature changes according to the position of ignition. Results & conclusion : When we measured the warm needling's partial temperature according to the position of ignition, the bottom ignition method got the higher result on the peak temperature measured at 2cm below the head than the apex ignition method.

• 한국축산식품학회지
• /
• 제36권6호
• /
• pp.744-751
• /
• 2016

The objective of this study was to investigate the effects of partial beef fat replacement (0, 30, 50, 100%) with gelled emulsion (GE) prepared with olive oil on functional and quality properties of model system meat emulsion (MSME). GE consisted of inulin and gelatin as gelling agent and characteristics of gelled and model system meat emulsions were investigated. GE showed good initial stability against centrifugation forces and thermal stability at different temperatures. GE addition decreased the pH with respect to increase in GE concentration. Addition of GE increased lightness and yellowness but reduced redness compared to control samples. The results of the study showed that partial replacement of beef fat with GE could be used for improving cooking yield without negative effects on water holding capacity and emulsion stability compared to C samples when replacement level is up to 50%. The presence of GE significantly affected textural behaviors of samples (p<0.05). In conclusion, our study showed that GE have promising impacts on developing healthier meat product formulations besides improving technological characteristics.

• 한국사회복지학
• /
• 제69권2호
• /
• pp.247-269
• /
• 2017

본 연구는 한국복지패널 9차년도(2014) 자료를 사용하여 가구주의 장애여부와 삶의 만족도 사이에서 자산수준과 자아존중감의 다중매개효과를 검증하였다. 분석결과, 가구주의 장애는 삶의 만족도와 자산수준 그리고 자아존중감에 각각 부적으로 영향을 미치는 반면에, 가구주의 자산수준은 삶의 만족도에, 자아존중감에 각각 정적으로 영향을 미치는 것으로 나타났다. 그리고 가구주의 자아존중감은 삶의 만족도에 정적으로 영향을 미치는 것으로 드러났다. 또한, 가구주의 장애여부와 삶의 만족도 간의 관계에서 자산수준과 자아존중감의 부분매개효과가 검증되었다. 마지막으로 가구주의 장애여부와 삶의 만족도 사이에서 자산수준과 자아존중감의 다중 부분매개효과가 검증되었다. 본 연구는 성인 장애인 가구를 대상으로 하는 저축프로그램 설계의 개입방안을 마련하기 위한 실천적 정책적 근거를 제시하였으며, 장애인의 저하된 삶의 만족도를 향상시키는데 있어서 Sherraden의 자산효과이론과 자아존중감의 긍정적 측면을 재조명하였다는 데에 의의가 있다고 볼 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2064-2071
• /
• 2011

We are developing an innovative super-speed land transportation system running in a partial vacuum in tunnels with small inside diameter to reduce the aerodynamic drag forces. This paper presents the experimental results obtained on a small scale model when a super-speed train model passing through a tunnel with small inside diameter and a partial vacuum to reduce the aerodynamic drag forces. The experiments were performed on a 1/52-scale moving model rig in which a train model with a diameter of 58 mm and a length of 603 mm was accelerated in a launching tube with 12.27 m length by means of the compressed air launcher and then passed through a tunnel model with 17.149 m length. The partial vacuum was maintained in the tunnel in order to reduce the energy consumption of the propulsion system of the super-speed tube train at super-speed of 700 km/h. In this study, the blockage ratio of train to tunnel model is 0.336. Experimental results show the nonlinear effects of the vacuum on the speed-up of the train model in the tunnel model under the partial vacuum up to 0.21 atm and at the velocity up to 684 km/h. This paper is first study for experiments on the speed-up of a super-speed train model in the partial vacuum tunnels.