• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.163-170
• /
• 2015

This research is to focus on the method of moving line optimization in Agricultural Industry, especially Garak Wholesale Market Modernization Project, by using simulation tool. As everybody knew, it's very difficult to apply the SCM operation rules in Agricultural Industry, because the standardization system in Agricultural Industry was not completed. The five flow management factors, vehicle moving line management, customer moving line Management, Logistics Device Moving Line Management, Working Person Moving Line Management, Product display moving line management, are needed to be optimized on the basis of standardization rules, and to achieve this will be the good infrastructure to make the Agricultural SCM system. It's very different between the SCM structure of manufacturing industry and logistics industry and the SCM structure of Agricultural Industry, because the SCM in manufacturing is occur in the basis of flow management, on the contrary, the SCM of Agricultural Industry is on the basis of activity management. For these reason, this study is the first approach to apply the simulation method in the part of moving line optimization in Agricultural SCM, and in near future, This study will help all designers and operators to apply the simulation work in the part of agricultural SCM, and we hope that next advanced study will continue by using this study.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.4
• /
• pp.271-276
• /
• 2016

Background: In the present study, we established an HPLC (high performance liquid chromatography)-analysis method for the determination of marker compounds as a part of the material standardization for the development of health-functional foods from Salvia plebeia R. Br. extract. Methods and Results: The quantitative determination method of hispidulin as a marker compound was optimized by HPLC analysis using a YMC hydrosphere C18 column with a gradient elution system. This method was validated using specificity, linearity, accuracy, and precision tests. It showed a high linearity in the calibration curve with a coefficient of correlation ($r^2$) of 0.999995. The method was fully validated, and was sensitive, with the limit of detection (LOD) at $0.09{\mu}g{\cdot}m{\ell}^{-1}$ and limit of quantification (LOQ) at $0.27{\mu}g{\cdot}m{\ell}^{-1}$. The relative standard deviation (RSD) values of the data from intra- and inter-day precision were 0.05 - 0.22% and 0.32 - 0.42%, respectively, and the intra- and inter-day accuracy of hispidulin were 99.5 - 102.3% and 98.8 - 101.5%, respectively. The average content of hispidulin in Salvia plebeia R. Br. extract was $3.945mg{\cdot}g^{-1}$ (0.39%). Conclusions: These results suggest that the developed HPLC method is very efficient, and that it could contribute to the quality control of Salvia plebeia R. Br. extracts as a functional ingredient in health functional foods.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.154-163
• /
• 2006

Tooth morphology is the most important scientific aspect of dental medicine in regards to the treatment and study of teeth attrition relating to the absence of teeth due to dental caries or the occlusion of teeth due to external force. Most of the studies have focused on the external morphology in cutting teeth regardless of sex and age. However, the importance of internal morphology in the treatment of damaged teeth has been increased. Therefore, this study established the measurement criteria for the morphology of the mandibular first premolar which had never been presented, in order to investigate the external and internal morphologies of mandibular first premolars, and introduced a non-destructive method such as a microcomputed tomogrphy. Mandibular first premolars in superlative state were taken from molars of middle aged males and females and used as specimens for this study. Criteria relating to the internal and external morphology measurements were established to quantify the length of the teeth in identical state. Two dimensional image data for the selected mandibular first premolar were obtained by taking the image of each O.022mm section, which is perpendicular to the vertical direction using the microcomputed tomography. The Vworks program was applied to measure the length of each morphological part according to the set measurement criteria. These measured data were compared with the data presented by G. V. Black and the internal and external morphologies of the teeth of middle aged Koreans were also compared according to gender. In addition, the methodology for measurement of the mandibular first premolar was presented and according to this, the standardized mandibular first premolars of middle aged Korean males and females were made by using a rapid prototyping system.

• The Korea Journal of Herbology
• /
• v.37 no.5
• /
• pp.37-51
• /
• 2022

Objectives : The purpose of this study was to apply informations related to herbal medicines to IDMP (Identification of Medicinal Products), an ISO standards related to medicinal products substances, for systematic collection of data through the integration of informations on distribution, manufacturing, and management of herbal medicines. Methods : By analyzing ISO 11238 and ISO/TS 19844, elements that can be used in the information model of herbal medicine were derived from the identification of medicinal products information model on substances. The labeling specified in the safety and quality control regulations for herbal medicines was mapped to the IDMP information model, and ginseng was applied as an example. Results : Herbal medicine corresponded to substance in IDMP. Among the five types of substances specified by IDMP, herbal medicines were expressed as structurally diverse. Scientific name was used as an invariant property of herbal medicine, and the substance level included information about source material and modification, and specifically included information about the scientific name, medicinal part, fraction, and processing. In addition, the specified substance level had information on the constituents, characteristic attributes, manufacturing, and grade of the herbal medicine. Conclusions : It is necessary to establish a code system for identifying herbal medicines. In order to apply the IDMP standards, research on the development of standard terms is required to express the characteristics of herbal medicines. In addition, information for identification of herbal medicines is also required, and information from production to consumption should be systematically accumulated and managed for actual application.

• Korea Journal of Hospital Management
• /
• v.7 no.2
• /
• pp.80-98
• /
• 2002

The purpose of this study was to investigate user satisfaction at Defense Medical Information System as it has been utilized as a part of National Defense Information Strategies since Aug. 2000. The subjects of this study were nurse officers and army surgeons of a hospital with 1,000 beds. The results of this study are as follows; First, according to the characteristics of the subjects, there was statistically significant difference in system satisfaction, job satisfaction and information satisfaction at Military Hospital Information System. Second, according to the intention of participation, there was a statistically significant difference in user satisfaction at Military Hospital Information System. Third, according to a level of dexterity at Military Hospital Information System, there was statistically significant difference only in job satisfaction. Fourth, factors to influence system satisfaction were one's duty, using period of Military Hospital Information System, and a level of dexterity at Military Hospital Information System. Factors to influence job satisfaction were a level of dexterity at Military Hospital Information System, one's duty and intention of participation. Factors to influence information satisfaction were one's duty, a level of dexterity at Military Hospital Information System, and intention of participation. As the first study on user satisfaction at Military Hospital Information System, this study suggests the followings. First, a plan to inspire users with intention of participating in information system should be prepared. Second, it is necessary to provide policy activities for job standardization of Military Hospital Information System and legal system improvement.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.19 no.3
• /
• pp.191-201
• /
• 2006

Purpose : Skin Resistance Variability(SRV) is a kind of biofunctional signal, and it can show the function of autonomic nervous system, especially in the sympathetic nerve. The objective of this study is to find out the differences of SRV of reproductive women with aging. Method : We measured SRV(by CP-6000A) of 151 women who visited Gynecologic Clinic. And the results were classified according to age, by five groups. After detection of SRV, we performed correlation analysis and ANOVA by SPSS 12.0. Results : 1. The SRV was measured twice. It resulted in seven areas. In 1, 2, 3 areas, the second results were higher than first results in every groups. In 4, 5, 6, 7 areas, the first results were higher than second results in every groups. 2. The SRV of lower part (4, 5, 6, 7 area) on the body was higher than that of higher part (1, 2, 3 area). 3. The SRV in the youngest group was higher than the oldest group in 1, 2, 3 area of second trial. Conclusion : With relations to the standardization and objectification of oriental medicine, we expect that these results contribute to gynecologic clinic in the department of diagnosis of functional abnormality of hypothalamus-hypophysis-ovarian axis (H-P-O axis).

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2090-2100
• /
• 2011

Railway rail fastening system is the critical device which gives big influences to not only the vehicle driving stability and the orbit's structural stability against the impulsive load, but also the noise vibration and the ride comfort. As a part of the low-carbon green growth, the importance of the railroad industry is getting highlights on its excellent energy-efficiency and eco-friendliness. However, so far the Korea's domestic rail fastening system technology is not so good and the technical reliance to abroad is very heavy. In this study, we conducted comparative analysis on the rail fastening system with new and used one of the same type. And those systems are imported by Seoul Metro and are being used by it. With this basis, we developed the components and the materials and then, established the durability assessment methods appropriate to the Korean domestic circumstances. And through the reliability qualification test on the 7 parts of the rail fastening system, we've improved the reliability and guaranteed the 15 years of service lifetime. ($B_{10}Life15$) Establishment and standardization of Reliability Standard on the parts of the rail fastening system such as anti-vibration pads, guide-plate, screw spike made it possible to perform the internationally fair assessment. And it is thought that we can satisfy the manufactures' and consumers' needs of cost-cutting and qualification security by shortening of assessment period on rail fastening system.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.230-238
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64) and tool kit on the ESPRIT. Transference of data among AutoCAD, I-DEAS Master Series Drafting, and ESPRIT is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of six modules, which are input and shape treatment, production feasibility check, strip-layout, die-layout, modelling, and post-processor modules. The system can design process planning and Die design considering several factors and generate NC data automatically according to drawings of die-layout module. As forming process of high precision product and die design system using 2-D geometry recognition are integrated with technology of process planning, die design, and CAE analysis, standardization of die part in die design and process planning of high pression product for semiconductor lead frame is possible to set. Results carried out in each module will provide efficiencies to the designer and the manufacturer of lead frame, semiconductor.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.9
• /
• pp.131-161
• /
• 1998

None of us need to be reminded that these are exceedingly times. The evidence in all about us. Between rising costs and lowering prices, many businesses find profits being depressed almost to the vanishing point. The eating out food business is in just such a profit squeeze. Our ability to compete depends not only on our ability to control the price-cost picture, but to improve its kitchen product system. A kitchen product system is incomplete without a series of built-in improvement procedures. They must be a key part of the system. "improvement" means the continual betterment of all aspects of the operation-its personnel, products, sales, and its costs. These improvements create profits. This study is devoted to a discussion of the application of research methods and techniques to develop of modern kitchen system through the job standardization. Their use in executing other responsibilities related to the process of kitchen system improvement will also be seen. The steps of setting objectives, gathering data, analyzing and interpreting data, and arriving at solutions, conclusions, and/or recommendations are briefly out lined. The material presented emphasizes the need for an improved and systematic approach to the study of problems. It is also implied, of not stated, that the process should not become so mechanical that the principles of creativity are violated. The foregoing steps suggest a systematic approach to kitchen system improvement, finding solutions to problems, improving work methods, instituting changes, followting up on work related to the change. This study has been limited to the truly important points related to each step in the process, it will undoubtedly call to mind other factors for consideration, however, believe that the principles and approach suggested in this study will bring about better methods and improve kitchen operating results.g results.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.931-938
• /
• 2006

It is important to operate an education resources which could be integrated to an system. But most of existing education information system was not developed with standardization. It is need the core education asset and reusable education service to make a good education system. Consequently, it is needed to use Sharable Content Object Reference Model(SCORM) based contents managing in order to reuse the contents of education. And it needs assembling and producing method with reusable core asset of education system to develop the application program for education. In this thesis, we study the Teaching-Learning supporting system to support systematic education resources. Teaching-Learning support system is developed of educational domain assess through development process based on Model Driven Architecture(MDA) and core asset on each stage. Application program of education is developed using MDA automatic tool through analyzing and designing for contents storage which is based on contents meta model. We finally can develop the application software of education with low cost and high productivity by raising the reusability of education contents and by using the core asset to the whole development process.