무선충전 기술은 사용자가 선 없이 충전할 수 있는 편리함의 이점으로 많은 모바일 전자기기의 필수요소로 자리 잡게 되었고, 지속적인 연구 개발에 의해 다양한 무선충전 시스템이 제안되고 있다. 대표적인 무선충전 시스템으로는 송수신 코일의 배치와 충전효율의 상관관계를 고려하여, 송수신 코일을 근거리 평면에 배치한 2D 평면 코일 시스템이 주로 사용되어왔다. 최근에는 평면으로 넓은 공간을 차지하는 2D 코일시스템에 높이구배를 주어, 공간을 효율적으로 사용하기 위한 3차원 코일시스템이 제안되고 있다. 하지만, 3차원 코일시스템은 2D 코일시스템에 비해 충전효율이 낮고, 특히 송수신 코일간의 거리가 멀어질수록 전력전송 효율이 급격하게 저하되는 경향이 있다. 본 논문에서는 기존 3차원 코일시스템의 단점인 낮은 충전효율과 충전자유도를 개선하기 위해 새로운 무선충전 시스템 설계를 제안한다. 3차원 형상으로 송신코일과 수신코일을 설계하였고, 이때 송신코일 내부에 독립된 송신코일을 추가로 구성한 이중 송신코일 구조를 제안하여 전송효율과 자유도를 개선할 수 있었다. 측정실험 결과, 107 kHz 동작주파수에서 송수신 코일의 거리가 8 mm일 때 제안한 시스템의 효율은 40.10 %로 기존 코일의 최대전송효율인 20.5 %에 비해 크게 증가했다. 본 논문에서 제안한 3차원 이중송수신 코일시스템은 실제 무선충전 시스템 설계 시 다양한 디자인의 무선충전 시스템 설계 및 충전효율 개선에 기여할 것으로 기대된다.
중첩은 복수의 이미지들을 겹쳐 놓는 것으로 여러 가지 표현의 목적을 위해 사용된다. 중첩 가운데, 특히 움직임을 표현하기 위한 중첩은 운동의 과정을 분석, 종합하면서 예술의 여러 분야에서 활용되어 왔다. 이러한 움직임을 표현하는 중첩을 '동체중첩'이라고 명명하고, '하나의 화면에 단일 동체의 운동을 동시에 나열해 움직임을 표현하는 기법'으로 정의한다. 동체중첩은 회화와 사진과 같은 평면 예술에서 시작되었는데 이를 '정적인 동체중첩'으로 분류하고, 이를 이어서 영화와 애니메이션과 같은 영상예술로 발전한 동체중첩은 '동적인 동체중첩'으로 분류한다. 이러한 동체중첩의 중심에는 무엇보다도 동체중첩의 독자적인 예술성과 미학을 구현한 노먼 맥라렌의 작품 <빠 드 되>가 위치하며, 이 작품을 중심으로 동체중첩의 핵심 개념을 분석하고 그 선후에 대한 연구를 통해 동체중첩의 맥락과 예술적 성취를 확인한다. 그리고 오늘날 동체중첩은 디지털 테크놀로지의 발달에 힘입어 기술과 차원을 더욱 확장시키고 있다. 신기술을 활용한 새로운 동체중첩의 작업들은 <빠 드 되>를 매체적으로, 그리고 개념적으로 재해석해 동체중첩의 새로운 가능성을 보여 주는데 이러한 동체중첩의 경향과 전망에 관해 살펴본다. 이와 같이 <빠 드 되>를 중심으로 한 동체중첩에 관한 논의는 궁극적으로 동체중첩이 이룬 예술적 성취를 확인하고 그 의미와 새로운 가능성에 대해 고찰하는 계기를 제공한다.
시각디자인(visual communication design)에서 이미지의 표현은 전통적으로 여러 표현매체(Media)의 매커니컬한 부분과 깊은 관계가 있다. 특히 디지털방식을 이용한 이미지 표현에서는 회화적인 표한 도면작성, 광학적인 표현, 영상이미지 등 다양한 형식의 이미지들이 디지털데이터로 전환됨으로써 이미지의 변환이 쉬워졌다. 한편 디지털형식으로 각종 표현매체가 통합됨으로써 여러 형식의 시각이미지들간의 함성이 활성화됨으로써 이미지표현의 범위가 다양해지고 있으며, 나아가 기존의 평면적인 표현에서 3D, 4D 등 다양한 차원의(dimensional) 표현들이 디지털디자인의 이미지표현에서 종합되고 있는 경향을 보이고 있다. 또한 이렇게 여러 이미지형식들이 종합되는 과정에서 부분적이거나 전체적인 이미지의 변환이 자주 발생하고 있으며, 그 변환은 크게 조형적인 측면과 기술적인 측면의 두 가지 요인으로 요약된다. 본 논문에서는 조형적 측면으로 기존의 회화적 표현과 사진술로 대표되는 광학적 표한 그리고 컴퓨터그래픽에서의 이미지 변환 원리를 유형화하고 기술적인 측면으로 데이터형식에 따른 이미지의 변환과 디멘션에 따른 세부적인 내용을 기술하였다. 이 중 특히 기술적이고 정량적인 측정이 필요한 내용에 대해서는 컴퓨터를 이용한 간단한 시뮬레이션을 통해 객관적이고 실증적인 결과를 요약하였고, 연구내용의 세부적인 결과를 실제 시각디자인 작업에서 활용하는 방안을 사안별로 제시했다.
This study aims to present concept of "gong" which was shared by traditional East Asian societies (Korea, China and Japan) and to identify how it has been developed through their respective process of modernization and industrialization. Despite the territorial proximity of the three countries, their industrial and technological development followed different patterns, and the notion of engineering from the Occident was also accepted and reconstructed with a certain difference in each country. Japan had developed its own concept of engineering as part of industrialization in Western style and in the context of establishment of an imperialist nation. What was important for Japan was how engineering could contribute to the national development of technology and industry, and to the development of Imperial Japan. For China, which attached importance to resistance to Western civilizations and to strengthening the competitiveness for and which needed to resolve domestic political conflicts, engineering constituted more than a simple issue on technological and industrial dimension; it was also associated with obtaining ethical and political legitimacy which would allow the nation to gain support from the working and peasant classes. Though belated, Korean attempted to build an independent modern state, yet experienced a considerable nuisance from the invasion of Japan and the protracted colonial period. Engineering of Korea had to take a long time before emerging from backwardness especially because of Japanese policies which tended to restrict technological development and avoid fostering qualified engineers in the colony. Therefore, engineering in Korea started to contribute to the nation's development and the improvement of technological competitiveness only after it was combined with modern higher education after liberation, under the name of engineering science (工學, gong-hak). This study argues that our recognition of what engineering was for and who engineers were in East Asia will allow us to evaluate current status of engineering education and provide us with significant insight which will be useful when we imagine the future society. Identity of engineering in Korea, China, and Japan has been developed along with historical contexts such as clash of civilizations, wars, recovery of sovereignty and obtaining of national competitiveness; now, what will be combined with engineering in the next generation? This question will lead and motivate engineering students to think and imagine about what future engineering should be and how they respond to it.
과잉치는 치배 형성기에 정상 치판의 과도한 증식의 결과로 발생하며 산발적일 수도 있고 유전적일 수도 있다 발생 빈도는 $1{\sim}3%$이며, 2:1의 비율로 남아에게 호발한다. 주로 상악 전방부에서 많이 발견되며 매복, 영구치의 위치 이상, 정중부 이개, 낭종, 비강으로의 맹출 등과 같은 다양한 합병증을 나타낼 수도 있다. 상악 전방부에서 발견되어지는 과잉치는 치축방향에 따라 위치가 결정되며 상악 전방부 과잉치의 1/3정도는 역위 매복되어 맹출의 가능성이 없지만, 치낭의 치관 부위가 정상적인 관계로 존재하는 한 과잉치의 이동이 일어날 수 있다. 치아의 이동은 경구개, 소구치 부위, 비강까지도 일어날 수 있다. 또한 전상악 수직고경의 성장으로 시간이 지남에 따라 외과적 접근이 어려워질 수 있다. 이에 본 두 증례에서는 역위 매복된 상악 전방부의 과잉치가 구개 측 중앙부까지 이동된 것을 발견하여 외과적으로 제거하였다.
1. Objectives Sasang Contitutional Medicine, a part of the traditional Korean medical lore, treats illness through a constitutional typing system that categorizespeople into four constitutional types. A few of the important criteria for differentiating the constitutional types are external appearances, inner state of mind, and pathological patterns. We had been developing a 3D Automatic Face Recognition Apparatus (3D-AFRA) in order to evaluate the external appearances with more objectivity. This apparatus provides a 3D image and numerical data on facial configuration, and this study aims to evaluate the mechanical accuracy of the 3D-AFRA hardware. 2. Methods Several objects of different shapes (cube, cylinder, cone, pyramid) were each scanned 10 times using the 3D Automatic Face Recognition Apparatus (3D-AFRA). The results were then compared and analyzed with data retrieved through a laser scanner known for its high accuracy. The error rates were analyzed for each grid point of facial contour scanned with Rapidform2006 (Rapidform2006 is a 3D scanning software that collects grid point data for contours of various products and products and product parts through 3D scanners and other 3D measuring devices; the grid point data thusly acquired is then used to reconstruct highly precise polygon and curvature models). 3. Results and Conclusions The average error rate was 0.22mm for the cube, 0.22mm for the cylinder, 0.125mm for the cone, and 0.172mm for the pyramid. The visual data comparing error rates for measurement figures retrieved with Rapidform2006 is shown in $Fig.3{\sim}Fig.6$. Blue tendency indicates smaller error rates, while red indicates greater error rates The protruding corners of the cube display red, indicating greater error rates. The cylinder shows greater error rates on the edges. The pyramid displays greater error rates on the base surface and around the vertex. The cone also shows greater error around the protruding edge.
The aim of this study was to determine the shear bond properties of four dentin bonding systems to internal cervical dentin, and to investigate the effect of the pretreatment for removing smear layer and position of dentin on shear bond strength of dentin bonding agents. The materials tested in this study were consisted of four commercially available dentin bonding systems[Allbond 2(AB), Clearfil Linerbond 2(CL), Optibond FL(OP), Scotchbond Multi-purpose(SB)], a restorative light-cured composite resin[Z100]J and a chelating agent[RC-prep(RC)]. Fifty-six freshly extracted human molars were used in this study. Dentin specimens were prepared by first cutting the root of the tooth 1mm below the cementoenamel junction with a diamond bur in a high speed handpiece under air-water coolant, and then removing occlusal part at pulp horn level by means of a second parallel section, The root canal areas were exposed by means of cutting the dent in specimens perpendicular to the root axis. Dentin specimens were randomly assigned to two groups(pretreated group, not-pretreated group) based on the pretreatment method of dentin surface. In pretreated group, RC was applied to dentin surface for 1minute and then rinsed with NaOCl. In not-pretreated group, dentin surface was rinsed with saline Each groups were subdevided into four groups according to dentin bonding systems. Four dentin bonding systems and a restorative resin were applied according to the directions of manufacturer. The dentin-resin specimens were embedded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of $1{\times}1mm$. The cut specimens were divided into three groups according to the position of internal cervical dentin. The shear bond properties of dentin-resin specimens were measured with Universal testing machine (Zwick, 020, Germany) with the cross head speed of 0.5mm/min. From this experiment. the following results were obtained : 1. In case of shear bond strength, there was no significant difference among dentin bonding systems in not-pretreated groups, whereas in pretreated groups, the shear bond strengths of AB and of SB were statistically significantly higher than those of CL and of OP. 2. The shear bond strengths of AB and of SB in pretreated groups were significantly higher than those in not-pretreated groups. 3. The shear bond strengths of radicular layer of OP were higher than those of occlusal layer of OP in not-pretreated groups, and of AB in pretreated groups. The shear bond strengths of radicular layer of AB and of CL in not-pretreated groups were higher than those in pretreated group.
Objective : Blood disease is common these days due to modern man's excessiveness in Yang heat (陽熱) and vulnerability of the Eum blood(陰血). This exposes them to warmheat/ dampness-heat diseases, where pathogenic heat easily penetrates the blood dimension(血分) creating stagnated blood(瘀血). Consequently, pathogenic symptoms in the collateral vessels increase, making it crucial to understand the pathogenic mechanism of the disease. Method : This paper examines the condition and region of the collateral vessel diseases(CVD) according to the blood diseases of Onbyeong, by analyzing each prescription's matching symptom. The disease in question in this paper is 'stagnated blood fixated in the collateral vessels'. Therefore diseases with stagnated blood in the Yang collaterals and Viscera collaterals or viscera themselves from the chapter of "On-Yeok-Ron(溫疫論)", and < Dry Blood-DaeWhangJaChungWhan(大黃蟅蟲丸) > chapter of "Geum-Gue-Yo-Rak(金匱要略)", were examined respectively. Result & Conclusion : The process of CVD according to the blood diseases of Onbyeong can be summarized as follows. First, bleeding in the Yang and Bowel collaterals, then stagnation in the Yang and Bowel collaterals, and finally stagnation in the viscera collaterals or Liver itself. The refractory nature of blood stagnation symptoms of the collateral vessels is mainly due to the characteristics of the collateral vessel itself. In structure, they are very narrow and small, situated at the most terminal part of the body where it is difficult for the Jeong Gi(精氣) to reach. Also, as they are symptomatic of degeneration of Jeong Gi, the root of the disease is very deep. Therefore to resolve blood stagnation in the cases of Ju-Gaek-Gyo and Dry Blood, general approaches using 'Gi communication(行氣)' or 'Blood vitalizing(活血)' medicinals will not suffice. Special medicinals such as crustacean and insects need to be appropriately applied.
시위군은 궁성(宮城)의 수위(守衛) 및 국왕, 왕실세력의 행차시 최측근 군사력으로 일반군사조직이 붕괴되는 고려말까지 존속되었던 군사조직이었다. 외침(外侵)이나 내란(內亂)등으로 왕권이 위협받을 때 더 굳건한 시위조직이 구축되었고, 그 규모나 능력 면에서도 강화되었다. 고려시대의 시위조직은 군사조직의 일환으로 중앙군과 지방군으로 나뉜다. 2군은 국왕의 시위군이고, 6위는 수도경비와 국경방위의 임무를 맡고 있었다. 중앙군의 지휘관들은 상장군.대장군 등으로 일컬어 졌고, 그 휘하에 장군들이 있었다. 문신귀족들이 국가의 중요정책을 도병마사에서 의논했듯이 상장군 대장군 등은 무관들의 회의 기관인 중방에서 군사문제를 의논했는데, 중방은 나중에 무신정변이 일어나 무신들이 집권한 뒤에는 권력의 중추 기구가 되었다. 무신정권 시기에는 현대적 의미의 사설 시위조직인 도방과 내도방이 출현하게 된다. 또한 최씨정권기에는 사설 시위에만 그친 것이 아니라 때로는 국가 공무에 참가하기도 하였으며, 최씨일문에 전횡을 증오하고 반대하는 순기능적 역할도 수행하였다. 오늘날 세계 어떤 국가의 헌법(憲法)을 살펴보더라도 그 국가의 국왕 및 국가원수는 대외적으로 국가를 대표하고 대내적으로는 국가와 국민을 보호할 책임이 있다. 따라서 국가원수의 시위(侍衛)는 한 개인의 생명과 신체를 보호하는데 머물지 않고 국가의 안위를 보호하는 국가안위적(國家安危的) 차원에서 한치의 오차도 없이 완벽하게 이루어 져야한다. 또한 국가원수에 대한 시위(侍衛)는 시위기관에 부여된 최대의 임무인 동시에 국가의 안위에 직결된다는 사실을 인식하여 부단한 노력을 해야 할 것으로 사료된다.
1980년 9월 2일부터 1981년 8월 2일까지 금강 하구역인 충남 서천군 서면 솔리산 바지락의 생식소를 조사한 바. Gymnophallidae에 속하는 신종의 cercaria를 발견하여 Cercaria tapes n. sp.로 기재하였다. sporocyst의 크기는 $380-650{\times}130-160{\mu}m$이고, 전단에 분출구와 인두가 있으며, 안쪽에는 30여개의 cercara 및 배세포가 들어 있다. cercaria는 긴 타원형으로 각부의 크기는 충체 $160-187{\times}62-77{\mu}m$, 꼬리 $47-52{\times}17{\mu}m$, 갈라진 꼬리부분 $67-72{\times}12-15{\mu}m$이다. 배설낭은 Y형이고, flame cell식 은 2[(1)+(1)]=4이다. 바지락 2,086개중 42개가 기생되어 연평균 $2.01\%$의 기생률을 나타냈고, 기생률이 가장 높은 시기는 3월의 $5.74\%$, 가장 낮은 시기는 1월의 $0.4\%$이었고, 5,6월에는 기생패가 검출되지 않았다. 각장 2.1-3.0 cm가 $0.38\%$, 3.1-4.0cm가 $1.53\%$, 4.1-5.0cm가 $0.09\%$의 기생률을 나타냈고 2.0cm이하의 치패에는 기생되지 않았다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.