• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.408-412
• /
• 2010

The single-phase switched reluctance motor(SRM) generates the positive torque in the restricted section. So, it can not started by itself and the torque ripple is heavier than poly-phase. For self-starting and fixing rotating direction, the rotor should be placed at the rising inductance slope when stationary. The parking permanent magnet locates the rotor in the fixed position, which can be started by it-self. It is very simple and cost effective but has some drawbacks. It affects the rotor during the operation, so the characteristics of motor, such as a torque, speed, and ripple are changed to go bad. This paper presents the detent torque of parking magnet starting device through the finite element analysis and experiments. The finite element analysis is performed at incremental rotor positions over one detent torque cycle for any one pole. The prototype, fabricated in the previous research, is used for the experiments. The inductance, instant torque, and detent torque are calculated using the terminal voltage and phase current. Finally, the finite element analysis result and the experiment result are compared for analysis and validity.

• Journal of Applied Reliability
• /
• v.14 no.3
• /
• pp.147-151
• /
• 2014

An actuator latch device of a hard disk drive is installed for locking an actuator to hold a magnetic head parked in a parking zone. Applying an external force to the drive, the head can move away from the parking zone and destroy data on the disk. A magnet latching mechanism is used to prevent the actuator from moving when the computer is not in use. A permanent magnet holds the actuator when the head is in the parking zone. When the computer is turned on, the actuator has to overcome the latch magnet in order to move. A stronger latch magnet will hold the actuator adequately, but the actuator will not be released when unlocking is required. A breakthrough solution is needed to improve the reliability of the drive without any deterioration of its performance. In order to obtain the idea for resolving this technical contradiction, we analyse patents for actuator latch device of a hard disk drive. A practical way for solving contradictions in product development using TRIZ is proposed in this paper.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.450-454
• /
• 2003

This paper proposes a new driving scheme for single-phase SRM. The driving scheme is very simple and inexpensive. By use of this scheme, simple power devices based on low switching losses enable to high efficiency SRM drive. Starting, One of the main problem in single-phase SRM is overcame by a new starting algorithm with one hall sensor and a parting magnet. The proposed single phase SRM has a high efficiency and robust drive characteristics compared to that of a universal motor.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.874-876
• /
• 2001

This paper proposes a new driving scheme for single-phase SRM. The driving scheme is very simple and inexpensive. By use of this scheme, simple power devices based on low switching losses enable to high efficiency SRM drive. Starting, one of the main problem in single-phase SRM is overcome 2 using a parking magnet. This drive system has a high efficiency and robust drive characteristics compared to that of a universal motor.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.502-505
• /
• 2002

A singl-phase power factor corrected converter for switched reluctance motor driving is presented to achieve sinusoidal, near unity power factor input currents. Because it combines a power factor corrected converter and a conventional asymmetric SRM driver Into one power stage, the configuration has a simple structure resulted in low cost. A prototype to drive 6/6 poles SRM employing a parking magnet is designed to evaluate the proposed topology The characteristics and operational mode will be discussed in depth, and the validity of proposed driver will be verified through the experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.519-526
• /
• 2003

A singl-phase power factor corrected converter for switched reluctance motor hive is presented to achieve a sinusoidal and new unity power factor input currents. Because it combines a power factor corrected converter and a conventional asymmetric SRM driver into one power stage, the configuration has a simple structure resulted in low cost. A prototype to drive 6/6 poles SRM employing a parking magnet Is designed to evaluate the proposed topology. The characteristics and operational mode will be discussed in depth, and the validity of proposed driver will be verified through the experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.62-67
• /
• 2002

A single-phase power factor corrected converter for switched reluctance motor driving is presented to achieve sinusoidal, near unity power factor input currents. Because it combines a power factor corrected converter and a conventional asymmetric SRM driver into one power stage, the configuration has a simple structure resulted in low cost. A prototype to drive 6/6 poles SRM employing a parking magnet is designed to evaluate the proposed topology. The characteristics and operational mode will be discussed in depth, and the validity of proposed driver will be verified through the experimental results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.5
• /
• pp.7-13
• /
• 2011

The climate change due to the increased consumption with fossil fuel and rise of the oil price have been serious global issues. Automobile industry consumes 30% of the oil every year and causes air pollution and global warming by the exhaust emissions and carbon dioxide ($CO_2$). The demand of two-wheeled vehicle increases every year due to the parking and traffic problem caused by the increased automobiles in the urban area. Approximately 50,000,000 two-wheeled vehicles were produced in 2008. The development and sales of the hybrid two-wheeled vehicle industry become active due to its increased market demands. In this paper, the change of the motor and battery efficiency, driving distance, hill climbing ability with the change of the motor capacity was analyzed. Simulation of the peculiarities in urban driving schedule(World-wide Motorcycle Test Cycle(WMTC), Manhattan driving schedule), constant speed(10 km/h, 35 km/h) of small electronic two-wheeled vehicle was also carried out. Through the simulation result, appropriate capacities of the motor and battery for urban driving was acquired.