• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.11
• /
• pp.977-982
• /
• 2015

This study uses finite element analysis to evaluate the forming load of tool entrance angle of the cold forward extrusion molding process of helical gear; this can replace the spur gear applied to the Electronic Parking Brake (EPB) system. A cold forging process is often used in the automobile industry as well as in various industrial machines due to its high efficiency. Finite element analysis is frequently used when interpreting results of the forging process. Formality was evaluated by calculating tooth profile filling rate of helical gear. Change in required forming load was investigated when the entrance angle of forward extrusion tool die was changed from $30^{\circ}$ to $60^{\circ}$, also by finite element analysis. We suggest suitable tool entrance angles.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1172-1175
• /
• 2020

Automotive ECU integrates CPU core, IVN controller, memory interface, sensor interface, I/O interface, and so on. Current automotive ECUs are often developed with proprietary processor architectures. However, demends for standard processors such as ARM and RISC-V increase rapidly for saftware compatibility in autonomous vehicles and connected cars. In this paper, an automotive ECU is designed for parking assist system based on RISC-V with open instruction set architecture. It includes 32b RISC-V CPU core, IVN controllers such as CAN and LIN, memory interfaces such as ROM and SRAM, and I/O interfaces such as SPI, UART, and I2C. Fabricated in 65nm CMOS technology, its operating frequency, area, and gate count are 50MHz, 0.37㎟, and 55,310 gates, respectively.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.3
• /
• pp.133-139
• /
• 2023

This paper proposes a two-stage Water Shield Automation System (WSAS) to predict the possibility of river overflow and vehicle flooding due to sudden rainfall. The WSAS uses a two-stage Deep Neural Network (DNN) model. First, a river overflow prediction module is designed with LSTM to decide whether the river is flooded by predicting the river's water level rise. Second, a vehicle flooding prediction module predicts flooding of underground parking lots by detecting flooded tires with YOLOv5 from CCTV images. Finally, the WSAS automatically installs the water barrier whenever the river overflow and vehicle flooding events happen in the underground parking lots. The only constraint to implementing is that collecting training data for flooded vehicle tires is challenging. This paper exploits the Image C&S data augmentation technique to synthesize flooded tire images. Experimental results validate the superiority of WSAS by showing that the river overflow prediction module can reduce RMSE by three times compared with the previous method, and the vehicle flooding detection module can increase mAP by 20% compared with the naive detection method, respectively.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.485-488
• /
• 2024

본 논문에서는 전기차 시장의 성장 및 수요 증가로 인한 충전 인프라 부족에 대한 문제를 해소하기 위한 방안으로, 센서를 활용한 각 자리별 빈 주차 자리 확인 기능과 전기차 충전 자리의 남은 대기 시간에 대한 정보를 실시간 모니터링 할 수 있는 시스템을 구현하였다. 기존의 LED 표시등의 정보를 웹사이트를 통해 시각적으로 전달하며, 실시간으로 주차 여유 공간과 전기차 충전 자리의 대기 시간을 확인할 수 있게 하였다. 더불어 발레 파킹 서비스와의 융합을 통해 충전 완료 후 차량 이동의 불편함 및 인프라 운영의 효율을 늘리는 방안을 제안해본다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.103-110
• /
• 2001

To reduce the traffic congestion and parking problems in urban areas tall and narrow vehicles have interested as a means to increase the utilization of existing freeways and parking facilities. The stability problem for those narrow vehicles which might be caused can be reduced by tilting the body toward the inside of the turn. The Direct Tilt Control(DTC) system and the Steering Tilt Control(STC) system have been proposed for those narrow vehicles. In this paper, as one of the performance improvement for that kind of vehicle a new control system to use the merits of both the DTC system and the STC system is proposed. Because two different control systems fight each other, the switching control scheme is applied as a means to prevent fighting. Also, the method in order to achieve the smoothly changed control system when the system is switched from the DTC to the STC or from the STC to the DTC, the appropriate type of control gain is designed.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2002.05a
• /
• pp.154-162
• /
• 2002

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.47-53
• /
• 1998

Presently, it was faced with serious social problems as traffic accident, parking violation & traffic congestion due to change of industrial structure, expansion of economic volume, elevation of national life level and rapid motorization. Accordingly, the study is research to improve immidiate transportation problems which could be establish the rating model about consideration degree of evaluation factor based on MDPREF's method in connection with Intelligent Transportation System(ITS)

• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.86-94
• /
• 2018

A sports center fire in Jecheon caused 29 deaths and 40 injuries. This study focused only on the structural factors of the building and equipment to investigate the causes of casualties based on the fire investigation results at the sports center. The structural factors of the building and equipment were a piloti-type parking lot, lack of a fire compartment between the piloti-type parking lot and lobby, lack of an installed sprinkler system, lack of an installed fire door in the main stairs on the $1^{st}$ floor, lack of an installed fire water tank on the rooftop, an installed pocket fire door in the main entrance on the $2^{nd}$ floor, poor fire compartments in an EPS space and a pipe pit and on each floor, a leak in the joint of a drain pipe, plywood installed in the hoistway of the freight elevator and interior wall, illegal remodeling of a closed rooftop structure, which cannot discharge smoke and heat, installed styrofoam insulation in the inside of the parking lot ceiling, an installed tempered glass window, which cannot be opened in the ladies bathroom on the $2^{nd}$ floor, and a finished dryvit exterior wall.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1523-1528
• /
• 2008

In this study, the ventilation system of connection passage and elevator hall of underground parking lot in apartment houses is investigated to extract the data for the installation and the application by the experimentation. In case of the elevator hall, actual air exchange rate is predicted fivefold higher than air exchange rate by infiltration and exfiltration. Ventilation system is installed good by supply air and return air. As the next best thing, it is installed by supply air because of IAQ control. The temperature of connection passage and elevator hall uniformly with $7{\sim}8^{\circ}C$, is maintained even if the operating condition of ventilation system is different. Therefore, the installation of the preheater, which is installed at the inlet of ventilation system for the cold draft in winter, is not essential in southern area of Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.151-157
• /
• 2017

Recently, the retail industry has created efficient store operations, and has differentiated customer service through the future store. The intelligence of these stores is being applied by using technologies such as the Internet of Things (IoT), and the business process is being improved through this. The process also focuses on efficient store operations and service developments to provide customers with shopping convenience. The change in trends in the industry means that domestic distribution has already reached maturity. Even in countries where retail industries are mature, such as the U.S. and Europe, recent trends are moving toward maximizing operational efficiency and customer service. The reason is that many retailers have already reached saturation and survived the competition. This paper is a study of a drive-through service for automation and efficiency in receiving service after ordering by a customer of the distribution store. When ordering a product being purchased by a customer, the product picking process is done in a timely fashion through a picking scheduling agent. When the customer enters the store parking lot, a service supports the entry of information and finding a parking place so the customer can quickly pick up the goods. The proposed service can be applied to a retail store drive-through system, the distribution store's delivery system, the digital picking system, and indoor/outdoor large parking management systems, and it is possible to provide one-dimensional customer service through the application of IoT technology.