• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.3
• /
• pp.288-295
• /
• 2011

This paper addresses minimum-fuel, two-dimensional trajectory optimization for a soft lunar landing from a parking orbit to a desired landing site. The landing site is usually not considered when performing trajectory optimization so that the landing problem can be handled. However, for precise trajectories for landing at a desired site to be designed, the landing site has to be considered as the terminal constraint. To convert the trajectory optimization problem into a parameter optimization problem, a pseudospectral method was used, and C code for feasible sequential quadratic programming was used as a numerical solver. To check the reliability of the results obtained, a feasibility check was performed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.2
• /
• pp.91-101
• /
• 2016

This study is the compared seismic performance that are difference between the performance of structures on various site classes and beam-column connection. this analysis model was designed the previous earthquake load. To compare the performance levels of the structure was subjected to nonlinear static and nonlinear dynamic analysis. Nonlinear analysis was used to The Perform 3D program. Nonlinear static analysis was compared with the performance point and Nonlinear dynamic analysis was compared the drift ratio(%). Analysis results, the soft site class of the displacement was more increase than rock site classes of the displacement. Also The smaller the displacement was increased beam-column connection stiffness.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.519-527
• /
• 2019

This study was conducted to present useful information on the utilization and productivity analysis of laminated modular multi-family housing. To this end, the process of site installation was investigated and analyzed through a prior study, and the monitoring survey was conducted through the site installation case of an stacked multi-family housing. Based on the above, the results of productivity analysis using the web-cyclone technique were also presented. However, the site installation process has limitations on generalisation because the process is not the same for each construction company, and also limits that require verification through application in the actual site of the web-cyclone model presented in this study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.239-240
• /
• 2023

Construction site management involves overseeing tasks from the construction phase to the maintenance stage, and digitalization of construction sites is necessary for digital construction site management. In this study, we aim to conduct research on object recognition at construction sites using drones. Images of construction sites captured by drones are reconstructed into BIM (Building Information Modeling) models, and objects are recognized after partially rendering the models using artificial intelligence. For the photorealistic rendering of the BIM models, both traditional filtering techniques and the generative adversarial network (GAN) model were used, while the YOLO (You Only Look Once) model was employed for object recognition. This study is expected to provide insights into the research direction of digital construction site management and help assess the potential and future value of introducing artificial intelligence in the construction industry.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.367-379
• /
• 2011

This study was conducted to develop an ecological park planning model to enhance the functions of habitats and ecological corridors in Green Belt Areas, because changing policies have resulted in the degredation of the Green Belts due to progressive fragmentation of ecosystems. The principal outcome of the study is to plan an ecological park model through the restoration of habitats. In order to evaluate the capacity of the model to enhance the ecological functions of habitats and ecological corridors in Green Belt Areas, a simulation of habitats was carried out in the Sungnam-Yusoo region. The model was developed via following steps: 1. Selection of candidate sites and selection of the study site by analyzing development factors; 2. Selection of target species that can represent the habitat at the site; 3. Analysis of the site's suitability index for the target species; 4. Establishment of a conceptual plan to enhance and expand the currently produced suitability index; 5. Creation of a master plan based on the conceptual plan; and 6. Evaluation of the enhanced and expanded suitability index of the site. The study showed that the Habitat Unit (HU) of Rana coreana, which was selected as the target species of the study, increased from $28,044m^2$(3.6%) to $224,352m^2$(28.8%), and the HU of the site as the ecological corridor for wild animals increased from $4,674m^2$(0.6%) to $152,684m^2$(19.6%). The study results show that the ecological deficits of the Green Belt Area can be overcome by enhancing the ecological functions of the region, which should be beneficial. The model could be utilized for effective enhancement and management of other Green Belt Areas.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.3
• /
• pp.160-166
• /
• 2009

We estimated site productivity for unstocked land based on the relationship between site index (i.e., average height of dominant trees at fixed age) and soil physico-chemical properties of Pinus densiflora stands. Site index relates to a direct method of determining a tree's response to a specific environment such as forest soil and climate conditions. We selected 78 sites in 22 P. densiflora stands of central temperate forest zone, and sampled soils for physicochemical analyzing. And 13 properties of soils were statistically treated by stepwise regression. In the degree of contribution of the variables to site index, the highly effective variables in A horizon were OM, clay content, sand content, available $P_2O_5$, and Exch. $Ca^{{+}{+}}$ inorder, and in B horizon T.N., O.M., Soil pH, cation exchange capacity(C.E.C.), and sand content in order. In both A and B horizon of the soil for P. densiflora stands, the variables commonly contributed to the site index were sand content and OM. These results may be useful to provide not only important criteria for establishment of Pinus densiflora stand sespecially in unstocked land but also aguidance for reforestation.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.675-679
• /
• 2008

The case which uses Ajax from the research which sees compared existing in case and have as how much effectiveness, comparison analyzed. Performance comparison from the research which sees, in order to compare the environment which is suitable the web site which is used actually most the web site model of existing which uses ASP and the web site which uses ASP.NET Ajax constructed the sample site from same condition and comparison analyzed. Two site models a data creates, comparison analyzed amendment, elimination and question right time answer back speed etc. respectively. With the comparative analytical result which leads an experiment the web site model of existing with the fact that the answer back speed of the model which uses Ajax improves.

• Korean Journal of Agricultural Science
• /
• v.44 no.1
• /
• pp.1-15
• /
• 2017

In major field crops, synthetic herbicides have been used to control weeds worldwide. Globally, herbicide resistance in weeds should be minimized because it is a major limiting factor for food security. Cross resistance can occur with herbicides within the same or in different herbicide families and with the same or different sites of action. Multiple resistance refers to evolved mechanisms of resistance to more than one herbicide (e.g., resistance to both ALS-inhibitors and ACCase-inhibitors) and this resistance was brought about by separate selection processes. Target site resistance could occur from changes at the biochemical site of action of one herbicide. Non target site resistance occurs through mechanisms which reduce the number of herbicide molecules that reach the herbicide target site. There are currently 480 unique cases (species ${\times}$ site of action) of herbicide resistance globally in 252 plant species (145 dicots and 105 monocots). To date, resistance in weeds has been reported to 161 different herbicides, involving 23 of the 26 known herbicide sites of action. Finally, it can be concluded that we can protect crops associated to herbicide resistant weeds by applications of biochemical, genetic and crop control strategies.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.8
• /
• pp.779-784
• /
• 2000

Comparing the adsorption properties and dissociation on a Pt(111) iththat ona Fe(111) surface, we have con-sidered seven coordination modes of the adsorbed binding site: $di-${\sigma}$${\Delta}$\mu\pi/\mu$, 1-fbld,2-fold, and 3-fbld sites. On the Pt(111) surface, t he adsorbed binding site of carbon dioxide was strongestat the1-fold site and weakest at the $\pi/\mu-site.$ The adsorbed binding site on the Fe(111) surface was strongest at the di-бsite and weakest at the 3-fold site. We have found that the binding energy at each site that excepted 3-fold on the Fe(111) surface was stronger than the binding energy on the Pt(111) surface and that chemisorbed $CO_2bends$ because of metal mixing with $2\piu${\rightarrow}$6a_1CO_2orbital.$, The dissociation reaction occured in two steps, with an intermediate com-plex composed of atomic oxygen and ${\pi}bonding$ CO forming. The OCO angles of reaction intermediate com-plex structure for the dissociation reaction $were115^{\circ}Con$ the Pt(111), and $117^{\circ}C$ on the Fe(111) surface. We have found that the $CO_2dissociation$ rea11) surface proceeds easily,with an activationenergy about 0.2 eV lower than that on the Pt(111) surface.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.2
• /
• pp.93-104
• /
• 2019

Minimal art, which began to flourish in the mid-1960s, explores perceptual situations caused by the involvement of objects in given site contexts. This has led to the mentions of minimal art as a site-specific art, but its limitations have also been pointed out. This study specifically addresses the limitations of minimal art as a site-specific art with two perceptual points of view. First, according to Michael Fried, situations described as 'now here' focus largely on the bodily experiences of a place. However, they do not rooted in specific time and space of a certain place. Second, the unique characteristics of a certain place are excluded from the perception of the body which occupies the passage of time. Self-sufficient algorithm, which is far from site-specific conditions, is the autonomous system creating the period in the way of arrangement of objects. In addition, Minimal art regards a body only as the objectivity excluding the subjectivity which is essential creating meaning in a place. In the latter part of the article, these features are dealt with through Donald Judd's works. This study on site-specificity also provides a new perspective on the discussion of Minimal architecture and Minimal landscape.