• The Korean Journal of Quaternary Research
• /
• v.17 no.2
• /
• pp.129-133
• /
• 2003

Water is critically important for Tricholoma matsutake(Tm) growth because it is the major component of the mushroom by over 90%. The mushroom absorbs water through the below ground hyphal colony. Therefore, the objectives of our study were to investigate spatio-temporal water changes in Tm colonies. This study was carried out at Tm fruiting sites in Sogni Mt National Park, where the below-ground mushroom colonies have been irrigated. To identify spatial water status within the Tm soil colony soil moisture and ergosterol content were measured at six positions including a mushroom fruiting position on the line of the colony radius. To investigate temporal soil moisture changes in the soil colony, Time Domain Reflectometry(TDR) sensors were established at the non-colony and colony front edge, and water data were recorded with CR10X data logger from late August to late October. Before irrigation, whereas it was 12.8% at non-colony, the soil water content within Tm colony was 8.0% at 0-5cm from the colony front edge, 6.2% at 10-15cm and 6.5-7.5% at 20-40cm. And the content was 12.1% at 80cm distance from the colony edge, which is similar to that at the non-colony. In contrast, ergosterol content which is proportional to the live hyphal biomass was only 0.4${\mu}g$/g fresh soil at the uncolonized soil, while 4.9 $\mu\textrm{g}$/g fresh soil at the front edge where the hyphae actively grow, and 3.8 ${\mu}g$/g fresh soil at the fruiting position, l.1${\mu}g$/g at 20cm distance and 0.4${\mu}g$/g in the 40cm rear area. Generally, in the Tm fungal colony the water content changes were reversed to the ergosterol content changes. While the site was watered during August to October, the soil water contents were 13.5∼23.0% within the fungal colony, whereas it was 14.5∼26.0% at the non-colony. That is, soil water content in the colony was lower by 1.0∼3.0% than that in the non-colonized soil. Our results show that Tm colony consumes more soil water than other parts. Especially the front 30cm within the hyphal colony parts is more critical for soil water absorption.

• Mycobiology
• /
• v.37 no.1
• /
• pp.10-16
• /
• 2009

The purpose of this study is to understand spatio-temporal changes of active fungal biomass and water in Tricholoma matsutake soil colonies during the mushroom fruiting season. The active fungal biomass was estimated by analyzing ergosterol content at four different points within four replicated locations in a single circular T. matsutake colony at Ssanggok valley in the Sogri Mt. National Park in Korea during 2003 to 2005. The four points were the ahead of the colony, the front edge of the colony and 20 cm and 40 cm back from the front edge of the colony. Ergosterol content was 0.0 to 0.7 ${\mu}g$ per gram dried soil at the ahead, 2.5 to 4.8 ${\mu}g$ at the front edge, 0.5 to 1.8 ${\mu}g$ at the 20 cm back and 0.3 to 0.8 ${\mu}g$ at the 40 cm back. The ergosterol content was very high at the front edge where the T. matsutake hyphae were most active. However, ergosterol content did not significantly change during the fruiting season, September to October. Soil water contents were lower at the front edge and 20 cm back from the front edge of the colony than at the ahead and 40 cm back during the fruiting season. Soil water content ranged from 12 to 19% at the ahead, 10 to 11% at the edge, 9 to 11% at the 20 cm back and 11 to 15% at the 40 cm back. Our results suggest that the active front edge of the T. matsutake soil colony could be managed in terms of water relation and T. matsutake ectomycorrhizal root development.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.3
• /
• pp.235-236
• /
• 1994

Direct colony hybridization on agarose gel plate was established for the identification of recombinant plasmids. The hybridization of the probe to nucleic acids on dried gel without transferring to solid supports was more effective and simpler than hybridization of such probes to materials immobilized on filters such as nitrocellulose or nylon. D-cycloserine in overlaying agamse was essential for releasing the nucleic acids from colony.

• Tuberculosis and Respiratory Diseases
• /
• v.87 no.1
• /
• pp.22-30
• /
• 2024

Tumor immune evasion is a complex process that involves various mechanisms, such as antigen recognition restriction, immune system suppression, and T cell exhaustion. The tumor microenvironment contains various immune cells involved in immune evasion. Recent studies have demonstrated that granulocyte colony-stimulating factor (G-CSF) and granulocyte-macrophage colony-stimulating factor (GM-CSF) induce immune evasion in lung cancer by modulating neutrophils and myeloid-derived suppressor cells. Here we describe the origin and function of G-CSF and GM-CSF, particularly their role in immune evasion in lung cancer. In addition, their effects on programmed death-ligand 1 expression and clinical implications are discussed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.4
• /
• pp.447-456
• /
• 2007

The ant colony optimization (ACO) is a probabilistic Meta-heuristic algorithm which has been developed in recent years. Originally ACO was used for solving the well-known Traveling Salesperson Problem. More recently, ACO has been used to solve many difficult problems. In this paper, we develop an ant colony optimization method to solve the maximum independent set problem, which is known to be NP-hard. In this paper, we suggest a new method for local information of ACO. Parameters of the ACO algorithm are tuned by evolutionary operations which have been used in forecasting and time series analysis. To show the performance of the ACO algorithm, the set of instances from discrete mathematics and computer science (DIMACS)benchmark graphs are tested, and computational results are compared with a previously developed ACO algorithm and other heuristic algorithms.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.373-379
• /
• 2012

Disruptions in manufacturing systems caused by system changes and disturbances such as the tool wear, machine breakdown, malfunction of transporter, and so on, reduce the productivity and the increase of downtime and manufacturing cost. In order to cope with these challenges, a new method to build an intelligent manufacturing system with biological principles, namely an ant colony inspired manufacturing system, is presented. In the developed system, the manufacturing system is considered as a swarm of cognitive agents where work-pieces, machines and transporters are controlled by the corresponding cognitive agent. The system reacts to disturbances autonomously based on the algorithm of each autonomous entity or the cooperation with them. To develop the ant colony inspired manufacturing system, the disturbances happened in the machining shop of a transmission case were analyzed to classify them and to find out the corresponding management methods. The system architecture with the autonomous characteristics was generated with the cognitive agent and the ant colony technology. A test bed was implemented to prove the functionality of the developed system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.8
• /
• pp.760-767
• /
• 2011

The flexibility and evolvability are critical characteristics of modern manufacturing to adapt to changes from products and disturbances in the shop floor. The technologies inspired from biology and nature enable to equip the manufacturing systems with these characteristics. This paper proposes an ant colony inspired autonomous manufacturing system in which the resources on the shop floor are considered as the autonomous entities. Each entity overcomes the disturbance by itself or negotiates with the others. The swarm of cognitive agents with the ant-like pheromone based negotiation mechanism is proposed for controlling the shop floor. The functionality of the developed system is proven on the test bed.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.2
• /
• pp.99-105
• /
• 2005

We investigated oviposition and colony development of Bombus ignitus and B. terrestris depending on different pollen. In five kinds of pollen blend, the colony development in fresh-freezing pollen blend produced in Korea (Korea-FFP) was the best performance, although egg-laying characteristics is lower than that of pollen blend for oviposition imported from Korppert company (Kopport-FOP). The Kopport-FOP proved that it was suitable to use for oviposition of bumblebees. The Korea-FFDP, freezing dried-fresh pollen blend produced in Korea, is lower rather than the Korea-FDP although it is similar to the KopportFOP in colony development. It is not efficient to use commercial pollen for bumblebee because it is expensive in cost. The dried pollen blend for honeybee feeding imported from China (China-DP) was not suitable for rearing of bumblebee because it did not form colony although the worker emerged. In types of pollen, the oviposition and colony development of B. ignitus were not affected by the fresh-freezing pollen and dried-freezing pollen. This result also indicated that dried pollen, dried in the shade for 5 - 6 days, is possible to use as commercial pollen for bumblebee reproduction.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.1
• /
• pp.95-99
• /
• 2004

This study was carried out to investigate the effect of body weight of queen on the developmental characteristics of foundation queens in the Bombus ignitus collected in Korean locality. Queens were classified into six groups based on their body weight (i.e., 0.4 g, 0.5 g, 0.6 g, 0.7 g, 0.8 g and 0.9 g). The average weight of 200 foundation queens collected was 0.657${\times}40.095 g and 0.6 g-class was most abundant (38 %) among six weight classes. The queen that had the heavy body weight showed the trends of higher rate of oviposition, colony foundation and progeny-queen production and shorter periods of preoviposition and colony foundation, suggesting the positive correlation between the body weight of queen and colony developmental characteristics. Also, the numbers of worker and progeny-queen emerged from the queen with heavy body weight were slightly higher than those with light body weight queen.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.20 no.2
• /
• pp.124-138
• /
• 2007

Purpose: This study was conducted to investigate the antimicrobial effects of the interior warming herbs on vaginal microbes. Methods: Staphylococcus aureus, Methicillin-resistant Staphylococcus aureus, Candida albicans and Gardnerella vaginalis were used for vaginitis-induced microbes. Lactobacillus gasseri, Streptococcus spp. and Escherichia coli HB101 were used for normal vaginal florae. And herbs for warming the interior (Zingiberis Rhizoma, Alpiniae Officinari Rhizoma, Aconiti Tuber, Anethi Fructus, Evodiae Fructus, Cinnamomi Cortex Spissus, Caryophylli Flos, Aconiti Tube, Zanthoxyli Pericarpium, Piperis Longi Fructus, Piperis Nigri Fructus) were used in this study. Antimicrobial activities were tested by the change of optical densities (OD) and colony test in vitro. Results: In the results of vaginitis-induced microbes, Anethi Fructus was decreased the OD values on MRSA and Gardnerella vaginalis and Aconiti Tuber was decreased on MRSA. There were no viable MRSA and Gardnerella vaginalis colony forming against Evodiae Fructus, Staphylococcus aureus and MRSA colony forming against Piperis Longi Fructus, Staphylococcus aureus colony forming against Piperis Nigri Fructus and MRSA colony forming against Zanthoxyli Pericarpium. In the results of normal vaginal florae, Zingiberis Rhizoma was decreased the OD values on Streptococcus spp. and all normal vaginal florae were showed viable colony forming against all experimental herbs. Conclusion: According to these results, we can suggest that some kinds of interior warming herbs have antimicrobial effects on vaginal microbes. So there might be needed to make furthermore studies to seek the herbs which have selective antimicrobial effect on pathologic vaginal microbes.