• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.135-141
• /
• 2016

This study aims to analyze the feasibility of installing a storage facility and make recommendations based on a cost-benefit analysis regarding the installation of a storage facility capable of preventing both floods and droughts. The capacity and installation costs are specified for the storage facility necessary to prevent floods, and a cost-benefit analysis is conducted by calculating the costs and benefits for each cost or benefit factor such as loss amounts, recovery costs, and drought prevention. The information can be used as the basic data for suggesting the feasibility of installing a multipurpose storage facility capable of preventing floods and droughts simultaneously. Also, this study expects to utilize its detailed results in a number of different ways including the prediction of loss amounts from natural disasters.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.16 no.1
• /
• pp.7-16
• /
• 2010

The cultural assets of the palaces royal tombs remains institution expanded the convenient facilities for the disabled that can help the disabled to watch, to propel the convenient facility expanding business according to the condition of each facility. However, there has been limitations for the disabled facility users in viewing the cultural assets, as the facilities were not installed or were not installed properly. Due to the uniform installation of the convenient facilities that did not consider the features of the cultural assets, the conservation value of the cultural assets have been depreciated and the convenient use standards of the facility users such as the disabled were simultaneously unsatisfactory. Thus, this study maintains the pre-existing value of the palaces royal tombs remains institution that is the Korean indigenous traditional heritage, and uses a part of the improvement model development study on the palaces royal tombs remains institution of the disabled convenience enhancement to understand the current convenient facility installation and relevant services to find the restricted factors in using the facilities and the main problems. The problems were categorized into 13 types of questions, using the repeated problems occurred within the investigated facilities to look at the actual condition of the facilities, which showed that the facilities were in adequate in the aspects of convenient facility installation and relevant service.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.2
• /
• pp.87-95
• /
• 1996

A questionary survey was performed to invetigate the citizen's attitude concerning the waste incineration facility. People disliked most cremetorim followed by waste transfer station, chmical factory, waste incineration facility and sanitary landfill. Most people favored 1km minimum distance of incineration facilities from the residence. Most people think that we need most composting facilities in the future followed by sanitary landfill and incineration facilities. Majority of people was willing to accept the perfect incineration facilities near their residence. However, 37.6% answered no. Most people accepted complusory measures by the goverment in the location of incineration facilites. One incineration facility per one city or Gun was slightly favored than multy-city or Gun incineration facility. People think that perfect thchnology most important to overcome Nimby's.

• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.257-262
• /
• 2012

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. Rotating cylinder FAC test facility was designed and fabricated and then performance of the facility was evaluated. The facility is very simple in design and economic in fabrication and can be used in material and chemistry screening test. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO), and temperature. Fluid velocity is controlled with rotating speed of the cylinder with a test specimen. FAC test of SA106 Gr. B carbon steel under 4 m/s flow velocity was performed with the rotating cylinder at DO concentration of less than 1 ppb and of 1.3 ppm. Also a corrosion test of the carbon steel at static condition, that is at zero fluid velocity, of test specimen and solution was performed at pH from 8 to 10 for comparison with the FAC data. For corrosion test in static condition, the amount of non adherent corrosion product was almost constant at pH ranging from 8 to 10. But adherent corrosion product decreased with increasing pH. This trend is consistent with decrease of Fe solubility with an increase in pH. For FAC test with rotating cylinder FAC test facility, the amount of non adherent corrosion product was also almost same for both DO concentrations. The rotating cylinder FAC test facility will be further improved by redesigning rotating cylinder and FAC specimen geometry for future work.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.526-534
• /
• 2016

This study had the goal of designing onboard structures for a pre-pilot mining test (PPMT), which is required for the commercialization of the deep-sea mining industry. This PPMT is planned to validate the performance of a hydraulic lifting system and verify the concept of operating through a moon-pool in the east sea, Korea. All of the onboard equipment and facility were designed by KRISO. Because the test was performed at the first development, it is difficult to determine what risk will occur in the facility. Therefore, risk-based design is required in the facility for the PPMT, which includes the facility layout, failure mode and effect analysis (FMEA), and risk reduction plan. All of the expected performances of the lifting system itself and the onboard facilities were qualitatively validated using the risk-based design.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.54-61
• /
• 2018

Objective: The current study aimed to investigate the accessibility and usability of the disabled person while using the everyday facility. Background: The national laws regulated accommodation of persons with disabilities, but our knowledge on the practical usefulness of the laws and acceptance by the users is still far from complete. Method: Compliance with laws was checked throughout the actual measurement of 87 engineering designs in the facilities of a national university, and the practical usability of the facilities was investigated by in-depth interviews with eight disabled persons. New design solutions were developed by the anthropometric methodology for better accommodation. The target-specific anthropometry database such as sitting knee height with wheelchair was employed. Results: First, the statistic showed that 28.7% of facility designs comply with the law, 29.9% of facility designs doesn't comply with the law, and 41.4% of facility designs doesn't have related law or regulation. Second, the law of table height(71cm in current) can accommodate only 49.3% of wheelchaired population. The following test for 95% accommodation revealed that the table with 80cm high is required. Third, the current law in the door width(90cm) can only accommodate 82.6% of disabled persons, so the new design solution was calculated and suggested that 100cm in the door width is necessary for 99% accommodation of disabled persons. Conclusion: Even with the laws and regulations for the disabilities it was clear that the accessibility and usability of the disabled persons in everyday facilities was still limited. An investigation for the new solutions about a wide range of facilities is necessary for better practical accessibility and usability of the handicapped persons. Application: The results of current study can be a basement of developing a new guideline or regulation of the facility design for the disabled persons.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.5
• /
• pp.38-45
• /
• 2020

Presently, safety management of facilities is conducted as a site-oriented safety inspection, but depending on the facilities, there are difficulties in access to the site, and the cost and time of inspection are inefficient due to excessive reliance on human resources. Therefore, the necessity of sensor-based safety management is being raised to ensure the safety of the facility at all times, and various studies on sensor safety management are being conducted, but the research on verification of practicality is still insufficient. Therefore, the improvement points were presented through analysis of domestic and international studies, and additional processes for setting sensor attachment location and threshold were derived by analyzing the H city sensor safety management process, and practicality of sensor safety management was verified through sensor data measurement values. It is expected that efficient, sensor-based facility safety management will be possible if clear criteria and ongoing practicality verification for the additional processes presented in this study should be carried out in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.449-459
• /
• 2021

More than 80 % of agricultural reservoirs are old facilities over 50 years old, and safety and function declines occur. As a result, safety accidents such as the collapse of the reservoir have occurred. Precise safety diagnosis is conducted in advance to prevent accidents such as reservoir collapse, and Water resources facility improvement project are implemented based on priority. However, the priority of the business is selected based on the subjective judgment of the facility manager. In this study, we set 80 hypotheses based on the results of precision safety diagnosis and decision-making examples of existing Water resources facility improvement project and selected 45 variables using correlation analysis and significance test. Using logistic regression analysis, the final 21 variables were selected and a decision support model was presented, and the classification accuracy of the model was 86.8 %. In this research, the part that presented the quantitative index for decision support when selecting the Water resources facility improvement project has important significance.

• Korean journal of applied entomology
• /
• v.60 no.2
• /
• pp.185-191
• /
• 2021

A Quarantine Pest Research Facility (QPRF) had been build in Animal and Plant Quarantine Agency and designed to ensure alien pests are safety contained inside the laboratory. Functions of QPRF including insect rearing, research, and physical containment facility were verified to check suitability as a research laboratory using the beet armyworm, Spodoptera exigua. As insect rearing and laboratory facility, S. exigua completed its development for 32.2 days at 25℃. Egg hatching, pupation, and adult eclosion showed 80, 86.6, and 90%. Two pesticides, fluxametamide and hydramethylnon showed high susceptibility against S. exigua larvae by spraying and dipping methods. As physical containment facility, male adults, which were artificially released from laboratory, did not capture in delta trap installed sex pheromone lure during winter season. Based on these results, QPRF will be used for study on alien insect species.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.1
• /
• pp.57-64
• /
• 2019

We investigated influence of connected influent on the treatability of a wastewater treatment plant (WWTP), recently accepting effluent from a sludge carbonization facility. Based upon the pollutant loading rates (kg/d) of each connected influent, food waste leachate and livestock wastewater contributed to high BOD and COD loadings, while sludge carbonization facility effluent certainly contributed to T-N and $NH_3-N$ loadings. The nitrification rate in aerobic tank decreased to 55% with the carbonization facility effluent entering to the WWTP, while it was 89% with no carbonization facility effluent entering. The sludge carbonization facility effluent may need to be pretreated to reduce T-N and $NH_3-N$ loadings before entering to the WWTP for further treatment.