• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.244-244
• /
• 1994

Cortex Mori, the root bark of mulbery tree has been used as an antiphlogistic, diuretic, and expectorant in herbal medicine. The purpose of this study is to evaluate chicken gamma globulin (CGG)-specific IgE-induced morphologic and functional changes in rat peritoneal mast cells (RPMC), and to determine whether Cortex Mori could inhibit the CGG-specific IgE-depeildent mast cell degranulation and histamine release from RPMC. Results are 1) the degranuration and histamine release from RPMC were not induced within 1 hour after addition of Cortex Mori alone, 2) the CGG and CGG-specific IgE-Induced degranulation from RPMC was observed within 10 minutes, 3) the histamine release from RPMC sensitised with CGG-specific IgE was induced by tile addition of CGG, 4) CGG-specific IgE-dependent degranulation rate in RPMC pretreated with Cortex Mori was significantly Inhibited, compared to that of control group without Cortex Mori pretreatment, and 5) the CGG-specific IgE-dependent histamine release from RPMC was significantly inhibited by pretreatment with Cortex Mori. These data suggest that Cortex Mori contains some substances with capabilities to inhibit CGG-specific IgE-dependent degranulation and histamine release from RPMC.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.84-87
• /
• 2009

본 연구는 건축용 바닥재로 널리 이용되는 PVC 상재의 표면을 열에 의한 손상으로부터 보호하기 위하여 기존에 사용하는 광경화형 우레탄-아크릴 수지에 내열성(anti-cigar burning)을 향상시킨 광경화형 수성도료 개발에 관한 것이다. PVC 바닥상재용으로 사용되는 내열기능성이 없는 우레탄-아크릴 수지에 인계화합물을 주원료로 합성한 내열재, 구아니딘을 주원료로 합성한 내열재, 일시적 방염제로 사용되는 제 2인산암모늄을 수지의 양 대비 함량(wt%)을 10, 20, 30%로 변화하여 첨가한 후 배합하여 수지의 내열성을 향상시킨 코팅액을 제조하였다. 제조한 코팅액은 코팅층의 두께조절이 가능한 Bar-coating을 사용하여 PVC 바닥상재에 코팅한 후, 내열성, 부착력, 내화학성, 코팅두께 등의 코팅층 표면물성을 평가하였다. 연구결과, 수지에 인계화합물을 주원료로 합성한 내열재 30%를 혼합하여 제조한 코팅액을 Bar-coater No.12로 코팅한 코팅표면이 열에 의한 손상이 가장 적고, 부착력 100%, 내화학성 양호로 가장 좋은 물성을 보였다. 전반적으로 내열재 함량이 높고 코팅 두께가 두꺼울수록 내열성이 우수한 것으로 나타났다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.102-105
• /
• 2001

The bending process for the curved tube can be developed by the hot metal extrusion machine with the multiple punches moving in the different velocity. The bending phenomenon has been studied to be occurred by the different of velocity at the die extrusion. The difference of velocity at the die exit section can be obtained by the different velocity of billets through the multi-hole container and by the welding of billets inside the porthole die chamber. The multiple billets are moving differently by the multiple extrusion punches controlled by PLC with the servo mechanism units. The results of the experiments show that the curved tube can be bended by the extrusion process and that the defects such as the distortion of section and the thickness change of thick tube, tile folding and wrinkling of thin tube can not be shown after the bending processing by the extrusion bending machine.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.3
• /
• pp.469-472
• /
• 2003

A method that effectively precipitates capsular polysaccharide of Haemophilus influenzae type b (polyribosylribitol phosphate, PRP) conjugated to tetanus toxoid (TT), PRP TT in a liquid vaccine has been developed to measure free PRP present in TT-conjugate vaccine. The method involves adding anti-TT antibody and ammonium sulfate to precipitate PRP-TT conjugate and measuring free PRP in tile supernatant. This new method provides a complete precipitation of the total PRP-TT, and provides an accurate and reproducible measurements of free PRP. The accuracy of the assay was confirmed by spiking known amounts of unconjugated PRP to PRP-TT conjugate, and the new method was found to have no effect on free PRP while precipitating PRP-TT. The published acid precipitation method did not produce reproducible results due to incomplete precipitation of PRP-TT, especially when the vaccine is formulated in a salt-buffered solution.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.2
• /
• pp.119-123
• /
• 1979

The cute toxicity test of mercury, cadmium and copper to yellowtail, Seriola quinqueradia, and to rock-bream, Oplegnathus fasciatus, were conducted by static bioassays from 18 July to 27 October, 1978. In the tests, tile least sensitive heavy metals were cadmium to rock bream and copper to yellowtail. The test species were most sensitive to mercury among all the chemicals used. The 24hr-LC 50 value for the yellowtail was 0.11mg/l for mercury, 0.82mg/l for cadmium and 1.03mg/l for copper. While the 48hr-LC 50 value for the rock bream was 1.40mg/l for mercury and 1.73mg/l for copper.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.57-66
• /
• 2002

This paper establised GPS network consist of 75km average baseline lengths over Jeollanamdo and Jeollabukdo nine point station and fixed Gwangju point station. We quantitavely analyzed how much precision of the baseline determination is improved for GPS survey when using the precise eqhemeris instead of tile broadcast ephemeris of GPS satellites. The observed data for each baseline were processed two times with the same conditions alternately changing the broadcast and the precise ephemeris. The standard deviations from the repeated measurments for each baseline ara compared between the results of using the broadcast ephemeris and the precise ephemeris. As the results, the precision, stability and reliability of the baseline determination using the precise ephemeris is better than those of using the broadcast ephemeris for all baselines.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.42-48
• /
• 2000

This paper is concerned with a simulation-based process design for the tension levelling of metallic strips based on the elasto-plastic finite element analysis with reduced integration and hourglass control. The tension levelling process is performed to elongate the strip plastically in combination of tensile and bending strain by a controlled manner so that all longitudinal fibers in the strip have an approximately equal amount of length and undesirable strip shapes are corrected to the flat shape. The analysis deals with a method for calculating the quantitative level of the curl to investigate the roll arrangements and intermesh suitable to elimination of the curl. The analysis provides the information about the intermesh effect on the amount, the tension effect and distribution of the strain as well as the stress in order to determine the amount of elongation for correction of the irregular shape. The desired elongation is referred to determine the number of work rolls and the value of tension. Especially, the analysis investigates tile effect of the mesh size in the non-steady state finite element analysis on the amount and distribution of the strain.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.113-119
• /
• 2000

This study is to investigate the effects of cold forming method with steel sheet of SCP3C to improve continuous productivity. Experiments were carried out in various working conditions, such as the number of stamping and the punch temperature. The effects of the punch temperature and the number of stamping on drawability of steel sheet of SCP3C as well as clearance and draw-in in tile number of stamping were examined and discussed. The cooled the punch and the die and the blankholder heated by stamping were achieved at continuous productivity and quality improvement. The optimum forming condition for drawing trunk floor panel of SCP3C is shown as the punch is cooled by coolant of $-5^{\circ}C$ and at the same time both the die and the blankholder are heated by stamping and frictional heat,

• The Journal of Fisheries Business Administration
• /
• v.48 no.4
• /
• pp.67-81
• /
• 2017

The aims of this study is to analyze the purchasing behavior of customers purchasing seafood using internet shopping mall based on the sales data of Suhyup Shopping Mall in 2016. The research shows three facts. First, 46.1% of those customers marine products in Suhyup Shopping Mall are purchasing less than 2 times a year and 62.7% of them are purchasing less than 5 times a year. Seconds, The amount of purchases of marine products using Suhyup Shopping Mall is very small. The proportion of purchasers with less than ￦100,000 per year is 48.5%, and the proportion of customers with annual purchases of less than ￦300,000 is 68.2%. Last, Relatively strong items were found by region and age. Abortion was a relatively strong item in the 20s, and In the 30s, the aquatic product set was a relatively strong item. In the 60s are seashells / scallops / shellfish and other fish, 70s are dried yellow croaker, abalone, tile fish and other fish. In the 60s and 70s, the other fishes showed strong relative strengths in terms of quantity and amount. But There were no relatively strong items due to regional differences according to the metropolitan area and nonmetropolitan area.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.468-474
• /
• 2005

SOx and NOx are known major precursors of acid rain and thus the abatement of their emissions is a major target in air pollution control. To obtain basic data on the removal process of simultaneous $SO_2/NO$, the optimal reaction condition and the composition of reaction solution for simultaneous removal of $SO_2/NO$, ware investigated using a bubble column reactor. Pilot scrubber was consisted of scrubber, filter and control box. Dust removal rate was 83, 92, and 97% with catalyst flux of 0.5, 0.8, 1.5 L/min, respectively Average dust removal efficiency with a kind of nozzle was about 94 and 90% in STS FF6.5 (5/8in.) and 14 of P.P W(1.0in.), respectively Dust and $SO_2$ were removed more than 98-96% regardless of reactor number. In the case of NO gas, removal yield of 83.3% was achieved after 48 hours in 1 stage, also removal yield of 95.7% was reached in 2 stages. In tile case of application of STS (5/8 in.) and P.P (1.0 in.) as used fill packing, removal efficiency was reached higher than 98% without related to of kind of fill packing.