• Title/Summary/Keyword: Park Se-Mu

Search Result 416, Processing Time 0.027 seconds

Thermoelectric properties of multi-layered Bi-Te/In-Se/Bi-Te thin film deposited by RF magnetron sputter

  • Kim, Hyo-Jung;Kim, Kwang-Chon;Choi, Won-Chel;Jung, Kyoo-Ho;Kim, Hyun-Jae;Park, Chan;Kim, Jin-Sang
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2010.06a
    • /
    • pp.231-231
    • /
    • 2010
  • Thermoelectric properties of a multi-layered thin film, which was composed with indium selenide and bismuth telluride, were investigated. The structure of the layered thin film is Bi-Te /In-Se/Bi-Te and it was prepared on sapphire substrate by RF magnetron sputter using stoichiometric $Bi_2Te_3$ (99.9%) and $In_2Se_3$(99.99%) target at room temperature. Then, it was annealed at temperature range of 150 - $500^{\circ}C$ in Ar ambient. Structural characterizations were done using X-ray diffraction(XRD, BRUKER, D8, 60kW) and transmission electron microscopy (TEM, FEI, Tecnai, F30 S-Twin), respectively. Cross-section of multi-layer structure was observed by Scanning electron microscopy (SEM). The resistivity and Seebeck coefficient of these samples were also measured by conventional equipment at room temperature. The maximum value of power factor was $1.16\;{\mu}W/k^2m$ at annealing temperature of $400^{\circ}C$.

  • PDF

A study on term of 'Jangbu theory 臟腑論' in 'Dong-Eui-Su-Se-Bo-Won 東醫壽世保元' (동의수세보원(東醫壽世保元) 장부론(臟腑論)에 대한 고찰(考察))

  • Lee, Kyung-Ae;Park, Seong-Sik;Lee, Won-Chul
    • The Journal of Dong Guk Oriental Medicine
    • /
    • v.4
    • /
    • pp.189-209
    • /
    • 1995
  • The purpose of this study is to understand a term of 'Jangbu theory 臟腑論' in 'Dong-Eui-Su-Se-Bo-Won 東醫壽世保元'. The conclusion would be summerized as follows. 1. 'Jangbu theory 臟腑論' of 'Sa-Sang medicine 四象醫學' is based on 'Sa-Sang structure 四象構造'. 2. 'Mind 心' of 'Sa-Sang medicine 四象醫學' is recognised as the Lord of body. 3. 'four-Jang 四臟' and 'four-Bu 四腑' constitute 'Sa-Sang structure 四象構造' which is based on the deviation of 'vital energy 氣', and 'four-Jang 四臟' plays a loading role. 4. 'Sacho 四焦' explains the whole function of human body including one's heart's desire, physical constitution and the visceral physiology. 5. 'ear-eye-nose-mouth 耳目口鼻' is connected with 'the profound secrets of nature 天機' and also has a close relation with creation of 'spirit-vital energy-blood-essence 神氣血精' and spiritual fuction. 6. 'SaHae theory 四海論' of 'Dong Mu 東武' is philosophical concept set on the basis of 'nature 天性' and 'life 人命'. 7. 'spirit-vital energy-blood-essence 神機血精' doesn't have the relation of mutual transformation. It's creation and consumption lies on 'the power of ear-eye-nose-mouth 耳目口鼻之力'. 8. 'Sa-Sang medicine 四象醫學' expands its theory centering on the deviation of 'vital energy 氣' and the transversal circulation of 'SaHae 四海' According to the above result, 'Jangbu theory 臟腑論' in 'Dong-Eui-Su-Se-Bo-Won 東醫壽世保元' should be understood on the basis of 'Sacho 四焦' and 'SaHae 四海' according to 'Sa-Sang structure 四象構造', accompanying philosophical thinking focused on human and society, the centural concept of 'Jangbu theory 臟腑論' could be said as 'Mind 心' to be the Lord of body.

  • PDF

Characteristic Evaluation of Mercury lodide Film for Fluoroscopy Application (Fluoroscopy 적용을 위한 Mercuric lodide film 특성 평가)

  • Kang, Sang-Sik;Park, Ji-Koon;Cho, Sung-Hoo;Yoon, Kyoung-Jun;Kang, Hyun-Gyu;Nam, Sang-Hee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.11a
    • /
    • pp.494-497
    • /
    • 2004
  • 본 연구는 방사선 영상센서 적용을 위한 $HgI_2$ 필름의 특성 평가에 관한 것으로서 X-선 조사조건별 인가전압에 따른 검출신호 특성을 조사하였다. 기존의 $HgI_2$ 검출기의 경우 신호량이 크다는 장점이 있으나 노이즈의 양이 크다. 이에 대한 해결책으로 보호층을 삽입하나 이 경우 X-선 조사에 따른 시간 응답 특성이 있어서 전하트랩현상(tailing effect)에 의한 영향이 크게 존재하였다. 따라서 본 논문에서는 이러한 문제점을 해결하고자 보호층으로써 a-Se 을 삽입하여 기존의 $HgI_2$ 검출기에서 사용되어지는 parlyene이 삽입된 검출기와 전기적 특성을 측정, 비교해보고자 한다. 제작방식으로는 대면적 제작이 용이한 스크린 프린팅 방식을 이용하여 두께 $140\;{\mu}m$$3\;cm\;{\times}\;2\;cm$ 면적으로 제조하였다. 측정결과, a-Se을 보호층으로 사용한 $HgI_2$ 필름이 민감도는 거의 비슷하나 누설전류가 안정화 되는데 걸리는 감소시간(decay time)이 parlyene을 사용한 구조에 비해 훨씬 낮았다. 또한 X선에 대한 민감도는 기존의 a-Se에 비해 월등히 높아 적은 방사선 조사량(radiation dose)에서도 신호검출이 가능하여 저선량이 요구되는 방사선 투시촬영(digital fluoroscopy) 적용에 유용할 것으로 기대된다.

  • PDF

EFFECT OF CALCIUM HYDROXIDE ON BOND STRENGTH OF DENTIN BONDING SYSTEMS (수산화칼슘 적용에 따른 상아질 접착제의 접착강도 변화에 관한 연구)

  • Park, No-Hoon;Park, Sang-Hyuk;Choi, Gi-Woon;Park, Sang-Jin
    • Restorative Dentistry and Endodontics
    • /
    • v.32 no.3
    • /
    • pp.198-207
    • /
    • 2007
  • The purpose of this study was to investigate the effect of calcium hydroxide on dentin bonding strength of various dentin bonding systems as a function of time in composite resin restoration. Dentin adhesives used in this study were Scotchbond Multipurpose, Single Bond, SE Bond and Prompt L-Pop. Flat dentin surfaces adjacent to pulp chamber were created, then $Ca(OH)_2$ and saline were mixed and applied on dentin surface of experimental group, then IRM was used to cover the mixture on dentin surface and the specimens were stored at $36.5^{\circ}C$ for experiment period (7 days, 30 days). After removing IRM and $Ca(OH)_2$, each dentin adhesives were treated on dentin surfaces. Composite resin (Z-250, 3M) was placed with S mm height and was light-cured for 20 seconds. After stored in distilled water for 24 hours, each dentin-composite bonded spicemen was embedded in epoxy resin and sectioned into $1.0\times1.0mm^2$ cross section composite-dentin beams. Specimen was mounted on zig of Universal testing machine and ${\mu}TBS$ test was performed. SEM analysis was performed to examine the fractured surfaces. The results suggested that applying calcium hydroxide did not show significant difference in dentin bonding strength.

The Supplementation of Yam Powder Products Can Give the Nutritional Benefits of the Antioxidant Mineral (Cu, Zn, Mn, Fe and Se) Intakes

  • Shin, Mee-Young;Cho, Young-Eun;Park, Chana;Sohn, Ho-Yong;Lim, Jae-Hwan;Kwun, In-Sook
    • Preventive Nutrition and Food Science
    • /
    • v.17 no.4
    • /
    • pp.299-305
    • /
    • 2012
  • Yam has been recognized having the beneficial effects for the prevention of various diseases, such as cancer, immunity, infection and obesity etc. There is increasing consideration to supplement the antioxidant nutrients to make up the lack of the antioxidant nutrient intakes. No study has been reported for the analysis of antioxidant mineral contents and comparison to dietary recommended intake for the sense of health promotion. In our study, we analyzed the contents of antioxidant trace elements (Zn, Mn, Fe, Cu and Se) and Cr contents in cultivated Korean yam powders for evaluation of nutrient intake aspects. We collected the commercial yam powders from six different cultivated areas in the South Korea and measured antioxidant minerals (Zn, Mn, Fe, Cu and Se) and Cr contents using trace element-free plasma spectrometer (ICP) or atomic absorption spectrometer (AAS) after dry-ashing and then wet-acid digestion. The accuracy of mineral analysis method was confirmed by the mineral analysis of standard reference material. Each analyzed element contents in yam were compared to dietary reference intakes of Koreans (KDRIs). The average levels of trace elements (Zn, Mn, Fe, Cu, Se and Cr) in yam powders were 18.3, 11.9, 36.0, 3.7, 1.9 and 1.27 ${\mu}g/g$ yam powder, respectively. The intakes of Zn, Fe, Cu and Se of which KDRIs is determined, are accounted as being up to 23.8%, 55.6%, 32.5% and 236% recommended intake (RI) of KDRIs, if daily yam supplementation (50 g) of commercial instruction would be considered. The intake of Mn is about 25% adequate intake (AI) of KDRIs with the daily supplementation of yam powder. Most of mineral intakes from daily yam supplementation were with the range of non-detectable to <10% upper limit (UL) level, which is very much safe. The study results show that daily supplementation of Korean yam power is beneficial to provide the supplemental nutrient intake and also is safe, if the suggested dosage would be considered.

Comparison of the I-V Characteristic as Various Composition ratio of Iodine in a-Se of $BrO_2/a-Se$ based Radiation Conversion Sensor ($BrO_2/a-Se$ 구조의 방사선 변환센서에서 a-Se에 첨가된 조성비 변화에 따른 I-V 특성 비교)

  • Choi, Jang-Yong;Park, Ji-Koon;Gong, Hyun-Gi;Ahn, Sang-Ho;Nam, Sang-Hee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.11a
    • /
    • pp.440-443
    • /
    • 2002
  • Present1y the X-Ray diagnosis system is a real condition that is changing by digital ways in it's existent analog ways. This digital radiation detector is divided by the direct method and the indirect method. The indirect method of applied voltage has special qualities that the resolution is low than direct method by diffusion effect that happens. The conversion process ( radiation${\rightarrow}$visible ray${\rightarrow}$electrical signal of two times, has shortcomings that the energy conversion efficiency of electrical signal is low. The direct method has shortcomings that need strong electric fie1d to detect electrical signal efficiently. This research achieved to develop digital detector of the Hybrid method that have form that mixes two ways to supplement shortcoming of direct. indirect method. A studied electrical characteristic by Iodine's Mixture ratio change is added to selenium in the detector which has a multi-layer structure (Oxybromide + a-Se). There are 8 kinds of Manufactured compositions to amorphous selenium Iodine each 30ppm, 100ppm, 200 ppm, 300ppm, 400ppm, 500ppm, 600ppm, 700ppm by a doped photoconductor through a vacuum thermal evaporation method. The phosphor layer is consisted of Oxybromide ($BrO_2$) which uses optical adhesives multi-layer structure. The manufactured compositions calculates and compares Net Charge and signal to noise ratio measuring Photocurrent about Darkcurrent and X-ray. When doped Iodine Mixture ratio is 500ppm to the multi-layer structure (Oxybromide + a-Se), applied voltage of $3V/{\mu}m$, leakage current of compositions $2.61nA/cm^2$ and net charge value by 764pC/$cm^2$/mR then the best result appeared.

  • PDF

Xylogone sphaerospora, a New Fungal Pathogen of Cultivated Ganoderma lucidum (영지의 새로운 병원성진균 Xylogone sphaerospora)

  • Lee, Jong-Kyu;Choi, Gyung-Ja;Cho, Kwang-Yun;Oh, Se-Jong;Park, Jeong-Sik
    • The Korean Journal of Mycology
    • /
    • v.24 no.4 s.79
    • /
    • pp.246-254
    • /
    • 1996
  • Since the mid of 1980's, cultivation area and production of Ganoderma lucidum have been increased annually in Korea. However, the presence of a fungal disease has become a major limiting factor in the cultivation of Ganoderma lucidum, causing a serious economic loss. The present study was carried out to isolate and identify the pathogenic fungus to Ganoderma lucidum. Several fungi isolated from the wood logs showing typical symptoms were tested whether they are pathogenic to Ganoderma lucidum or not by cross-pairing culture method, flask inoculation method, and wood log inoculation method. The pathogenic fungus produced ascomata. Mature ascomata was spherical, dark, thick-walled, $45{\sim}95\;{\mu}m$ diameter. Asci were thin-walled, evanescent when mature, disintegrate early. Ascospores were spherical, hyaline, glaborous, thick-walled, refractive, $3.6{\sim}4.3\;{\mu}m$ in size. Conidiophores soon became abundantly septate and broke up into arthrospores, which are cylindrical, $3{\sim}6\;{\mu}m$ long and $3{\sim}4\;{\mu}m$ wide. Based on the observations under dissecting microscope, light microscope and scanning electron microscope, teleomorph and anamorph of the pathogenic fungus were identified as Xylogone sphaerospora Von Arx & Nilsson and Sporendonema purpurascens (Bonordon) Mason & Hughes, respectively. X. sphaerospora is first reported as a pathogenic fungus of Ganoderma lucidum.

  • PDF

Recording Support System for Off-Line Conference using Face and Speaker Recognition (얼굴 인식 및 화자 정보를 이용한 오프라인 회의 기록 지원 시스템)

  • Son, Yun-Sik;Jeong, Jin-U;Park, Han-Mu;Gye, Seung-Cheol;Yun, Jong-Hyeok;Jeong, Nak-Cheon;O, Se-Man
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 2007.11a
    • /
    • pp.33-37
    • /
    • 2007
  • 최근 멀티미디어 서비스는 동영상 압축 기술 및 네트워크의 발달을 기반으로 하여 다양한 응용 서비스를 제공하고 있으며, 이 중 화상 회의 시스템은 이 두 가지 기술이 효과적으로 사용된 대표적인 예이다. 원격 사용자간의 원활한 의사전달을 위해 고려된 화상회의 시스템은 효과적인 응용 서비스로 분류되고 있지만, 이러한 서비스 제공을 위한 기술을 이용하여 빈도가 훨씬 많은 일반적인 회의를 지원하는 응용서비스는 드문 편이다. 본 논문에서는 얼굴 정보와 화자 정보를 기반으로 오프라인 회의를 보조하는 시스템을 제안한다. 제안된 시스템은 소규모의 마이크와 캠을 이용하여 화자의 위치를 파악하고 캠에서 얻어진 정보를 이용하여 얼굴 영역 정보를 분석하고 인식한 후 화자 정보를 추출하여 발언자들을 추적 하여 기록하는 기능을 제공한다.

  • PDF

Fabrication and feasibility estimation of Micro Engine Component (미세 엔진 운용성 검증 및 요소 기술 개발)

  • Lee, Dae-Hoon;Park, Dae-Eun;Choi, Kwon-Hyoung;Yoon, Joon-Bo;Kwon, Se-Jin;Yoon, Eui-Sik
    • Proceedings of the KSME Conference
    • /
    • 2001.06d
    • /
    • pp.31-36
    • /
    • 2001
  • As a part of micro engine development feasibility estimation was done through fabrication and test of down scaled combustor and MEMS fabricated spark electrode. In an experimental observation of the down scaled combustion phenomena where flame propagation was observed by optical method and pressure change in combustor which gives the information about the reaction generated thermal energy was recorded and analyzed. Optimal combustor scale was derived to be about 2mm considering increased heat loss effect and thermal energy generation capability. Through the fabrication and discharge test of MEMS electrode effects of electrode width and gap was investigated. Electrode was fabricated by thick PR mold and electroplating. From the result discharge voltage characteristic in sub millimeter scale electrode having thickness of $40{\mu}m$ was obtained. From the result base technology for design and fabrication of micro engine was obtained.

  • PDF

Evaluation of Power Performance by Anemometer on WTGS (풍력발전기 너셀에 장착된 풍속계를 이용한 출력성능 평가)

  • Kim, Soo-Sang;Park, Se-Kwang
    • Journal of Sensor Science and Technology
    • /
    • v.21 no.4
    • /
    • pp.303-310
    • /
    • 2012
  • We carried out the power performance evaluation for 1.5 MW${\times}$2 by using anemometer installed on WTGS(Wind Turbine Generator System) in the wind farm at Shi-hwa bang-a-mu-ri. In this paper, we compared and analyzed the performance of guaranteed output and measured output of WTGS which includes output curve, output coefficient, AEP(Annual Energy Product) and availability, etc.. The power performance of WTGS was optimized in the low wind speed sections(3 m/s ~ 10 m/s) and the measured output was more produced by AEP 109 % and availability 112 % than the guaranteed output. In addition, we could also cut the high cost of testing WTGS performance by using anemometer as a substitute for weather mast.