• Journal of Soil and Groundwater Environment
• /
• v.10 no.5
• /
• pp.25-36
• /
• 2005

Several metalliferous and coal mines, including Myungjin, Seojin and Okdong located at the upper watershed of Okdong stream, were abandoned or closed since 1988 due to the mining industry promotion policy. Thus these disposed an enormous amount of mining wastes without a proper treatment facilities, resulting in water pollution in the downstream areas. Acid mine drainage (AMD) and waste water effluents from the closed coal mines were very strongly acidic showing pH ranges of 2.7 to 4.5 and had a high level of Total Dissolved Solids (TDS) showing the ranges of 1,030 to 1,947 mg/L. Also heavy metal concentrations in these samples such as Fe, Cu, Cd and anion such as sulfate were very high. Concentrations of water soluble heavy metals in the Okdong streams were in the orders of Fe>Al>Mn>Zn>Cu>Pb>Cd, indicating Fe from the AMD and waste water effluents contributed greatly to the quality of water and soil in the lower watershed of Okdong stream. Copper concentrations in the effluents from the tile drainage of mine tailings dams were highest during the raining season. Water Pollution Index (WPI) of the surface water at the upper stream of Okdong river where AMD of the abandoned coal mines was flowed into main stream were in the ranges of 16.3 to 47.1. On the other hand, those at the mid stream where effluents from tailings dams and coal mines flowed into main stream were in the WPI ranges of 10.6 to 19.5. However, those at the lower stream were ranged from 10.6 to 14.9. These results indicated that mining wastes such as AMD and effluents from the closed mines were the major source to water pollution at the Okdong stream areas.

• Economic and Environmental Geology
• /
• v.44 no.1
• /
• pp.21-35
• /
• 2011

Inorganic and organic geochemical characteristics of Devonian bitumen carbonates in Alberta were studied using two drilling cores, Saleski 03-34-88-20w4 and Saleski 08-01-88-20w4, taken from the Core Research Center of Canada. The results of elements analyses showed high Total Inorganic Carbon, low Total Nitrogen and Total Sulfur, and Rock-Eval pyrolysis showed double $CO_2$ peaks in the oxidation part. These mean that the Devonian bitumen carbonates are mainly composed of dolomite formed by diagenesis, and its crystal texture is dominantly subhedral to anhedral but often euhedral. Bitumen contents were 3.6~19.0% in Saleski 3-34-88-20w4 and 5.0~16.4% in Saleski 08-01-88-20w4, respectively. As samples color become dark, bitumen and Total Organic Carbon contents are generally increasing in two cores. The results of biomarker analyses showed that the contents of resins and asphaltenes were 5~28% higher than those of saturated hydrocarbon, interring that the bitumen has been heavily biodegradated. According to the results of carbon isotope analyses in each component of bitumen, asphaltenes had highest values and the others had constant values. However, their values were varied in the range of normal crude oil (-18~-30‰).

• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.268-275
• /
• 2015

We evaluated the effect of mixed liquid fertilizer (MLF) on growth responses of plants and soil chemical properties. To do so, a pot experiment with cherry tomatoes (Lycopersicon esculentum var. cerasiforme) using loam soil was conducted for 81 days in a temperature-controlled glasshouse, and four N fertilization treatments were laid out in a completely randomized design with three replicates: control (C), chemical fertilizer treatment (CF), and two rates (MLF-0.5 and MLF-1.0) of MLF treatment. Soils were periodically sampled and analyzed for pH, EC, total N, inorganic N and total C, and growth characteristics of cherry tomatoes were measured. During the experimental periods, the pH of MLF soils was higher than that of CF soils. Soil total-N content increased right after CF-application and ultimately decreased to the level of the control (C) soil, while MLF-application slightly increased the level of soil total-N and this level remained unchanged throughout the experiment. The levels of soil inorganic N content increased after application of CF or MLF, but the initial increase disappeared in 56 days after transplanting (DAT). The dry weight of shoots and roots increased in CF or MLF plants, while the number of fruit increased only in MLF plants. Whereas soluble solid contents were higher in MLF plants than in the other (C and CF) plants, the titratable acidity was not different among treatments. However, no consistent effect of N treatments on major elements of the organs of cherry tomatoes was found. The amounts of N taken up by plants were 0.91 g for CF, 0.61 g for MLF-1.0, 0.43 g for MLF-0.5, and 0.25 g for control treatments, resulting in greater N efficiency for CF than for MLF.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.512-515
• /
• 2004

The purpose of this experiment was to obtain informations about variation of anthocyanin content within black-seeded soybean testa according to cultivation and harvest time. Three varieties, Ilpumgeomjeongkong, Geomjeongkong 2, Tawonkong were tested in this experiment. Seeds were planted on April 15 (early planting), May 15 (optimum planting), and June 15 (late planting), respectively. Harvest time was R6 (full seed), R7 (physiological maturity), and R8 (harvest maturity), respectively. The content of delphinidin-3-glucoside (D3G), cyanidin-3-glucoside (C3G), petunidin-3-glucoside (Pt3G), and total anthocyanin (TA) had all increased gradually from April 15 to June 15 as well as R6 to R8. There was no varietal difference in D3G, but C3G and TA of Geomjeongkong 2 were higher than other two varieties. Pt3G was the highest Tawonkong of varieties. The value of L as anthocyanin color difference had gradually decreased from April 15 to June 15 and R6 to R8, Geomjeongkong 2 among three varieties was the lowest. The value of a was the highest on May 15 and increased gradually from R6 to R8, Geomjeongkong 2 was the lowest. The value of b was the highest on June 15 as late planting and was the highest Geomjeongkong 2 of varieties. The value of b had increased gradually from R6 to R8. D3G, C3G, Pt3G, and TA contents showed mutually high positive correlation and these four characters were represented high negative correlation with L value but showed high positive correlation with a and b values. The value of L showed high negative correlation with a and b values. The value of a showed high positive correlation with b value.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.507-511
• /
• 2004

This research was carried out to offer the basic informations about new varietal breeding for specific use and physiological characteristics through investigation of detection, content variation and color difference of anthocyanin individual pigments within seed coats in domestic black soybean. The seed of thirteen cultivars such as Geomjeongkong 1, Geomjeongkong 2, Seonheugkong, Tawonkong, Ilpumgeomjeongkong, Geomjeongolkong, Cheongjakong, Jinju 1, Heugcheongkong, Juinunikong-Y, Juinunikong-G, Geomjeongkong 3, Geomjeongkong 4 was tested. C3G (cyanidin-3-glucoside) was detected in only Geomjeongkong 1 and Seonheugkong but D3G (delphinidin-3-glucoside) and C3G were found in Heugcheongkong. The rest cultivars that there were three anthocyanins such as D3G, C3G, and Pt3G (petunidin-3-glucoside). Anthocyanin content of tested cultivars showed a high variation. The ranges of D3G, C3G, Pt3G, and TA (total anthocyanin) contents were $0.55\~2.63mg/g,\;2.77\~8.38mg/g,\;0.38\~5.65mg/g,\;and\;3.32\~16.92mg/g$, respectively. These contents showed variation among cultivars as well as variation between two years, 2001-2002. As a result of variation of anthocyanin color difference, the ranges of L (lightness), a (redness), and b (yellowness) as Hunter's value were $34.09\~42.89,\;12.77\!22.85,\;and\;5.36\~12.10$, respectively, and these color differences showed variation among cultivars and also variation between two years, 2001-2002. D3G, C3G, Pt3G, and TA showed reciprocally a positive correlation being representive of high significance.

• Korean Journal of Microbiology
• /
• v.41 no.3
• /
• pp.216-224
• /
• 2005

Chromatography has now been used successfully to provide the requisite purity for human plasma-derived biop-harmaceuticals such as coagulation factors and immunoglobulins. Recently, increasing attention has been focused on establishing efficient cleaning procedures to prevent potential contamination by microorganisms as well as carry-over contamination from batch to batch. The purpose of present study was to develop a cleaning validation system for the assurance of virus removal and/or inactivation during chromatography process. In order to establish an assay system for the validation of virus clearance during chromatography cleaning process, a quantitative real-time PCR method for porcine parvovirus(PPV) was developed, since PPV, a model virus for human parvovirus B19, has a high resistance to a range of physico-chemical treatment. Specific primers for amplification of PPV DNA was selected, and PPV DNA was quantified by use of SYBR Green I. The sensitivity of the assay was calculated to be 1.5 $TCID_{50}/ml$. The established real-time PCR assay was successfully applied to the validation of PPV removal and cleaning during SP-Sepharose cation chromatography for thrombin purification and Q-Sepharose anion chromatography for factor VIII purification. The comparative results obtained by real-time PCR assay and infectivity titrations suggested that the real-time PCR assay could be a useful method for chromatography cleaning validation and that it could have an additive effect on the interpretation and evaluation of virus clearance during the virus removal process.

• Restorative Dentistry and Endodontics
• /
• v.36 no.3
• /
• pp.203-210
• /
• 2011

Objectives: The purpose of this study was to evaluate the effect of various application methods of one-step self-etch adhesives to microtensile resin-dentin bond strength. Materials and Methods: Thirty-six extracted human molars were used. The teeth were assigned randomly to twelve groups (n = 15), according to the three different adhesive systems (Clearfil Tri-S Bond, Adper Prompt L-Pop, G-Bond) and application methods. The adhesive systems were applied on the dentin as follows: 1) The single coating, 2) The double coating, 3) Manual agitation, 4) Ultrasonic agitation. Following the adhesive application, light-cure composite resin was constructed. The restored teeth were stored in distilled water at room temperature for 24 hours, and prepared 15 specimens per groups. Then microtensile bond strength was measured and the failure mode was examined. Results: Manual agitation and ultrasonic agitation of adhesive significantly increased the microtensile bond strength than single coating and double coating did. Double coating of adhesive significantly increased the microtensile bond strength than single coating did and there was no significant difference between the manual agitation and ultrasonic agitation group. There was significant difference in microtensile bonding strength among all adhesives and Clearfil Tri-S Bond showed the highest bond strength. Conclusions: In one-step self-etching adhesives, there was significant difference according to application methods and type of adhesives. No matter of the material, the manual or ultrasonic agitation of the adhesive showed significantly higher microtensile bond strength.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.136-141
• /
• 2002

A hot water extract was prepared from the artificially grown Gastrodia elata to investigate its chemical composition and various in vitro biological activities as an effort to develop G. elata as health/functional food materials. The contents of crude protein, ash, fat, fiber, moisture and total sugar were 5.4, 2.6, 3.6, 3.3, 8.1 and 77% (w/w), respectively. The extract of G. elata had greater amount of potassium (1,150 mg/100 g) than phosphorus (300 mg/100 g). Dose-dependence against human carcinoma (Hep3B, MCF-7, A549 and AGS) were observed from 0.2 mg/ml to 1.0 mg/ml. Especially, the treatment of 1.0 mg/ml extracts showed the highest cytotoxicity with 83% against gastric carcinoma (AGS). The extracts showed weak antimicrobial activities against Bacillus subtilis and Pseudomonas aeruginosa, but practically no antimicrobial activity against the other microorganisms tested. The effect of ${\alpha}$-glucosidase inhibition was 64% at the concentration of 1.0 mg/ml. The inhibitory effect of angiotensin converting enzyme (ACE) of the extract in the range of $0.2{\sim}1.0mg/ml$ showed $63{\sim}89%$, and the highest ACE inhibition was 89% at the concentration of 1.0 mg/ml of extracts. The highest activity of glutathion S-transferase (GST) was 221 % at the concentration of 1.0 mg/ml of the G. elata extracts. These results suggest that G. elata may be used as health/functional food materials.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.119-123
• /
• 1997

This study was performed to evaluate the influence of composting process with an intermittent aeration on the variation of rhizosphere soil temperature, $CO_2$ and $NH_3$ release, and the growth reponse of tomato plantlet in traditional and composting greenhouse. As the temperature of composting materials increased, rhizosphere soil temperature in 30cm depth rose up to $32^{\circ}C$ at one week after introduction. This was $18^{\circ}C$ higher than that of traditional greenhouse. After 20 days of active composting, temperature of rhizosphere soil started to decrease and remained constant at $23^{\circ}C$ after 35 days. For the traditional greenhouse, the averaged temperature ranged at $14{\sim}15^{\circ}C$. This results showed that composting greenhouse had the greater effect on increasing the underground temperature. Average value of evoluted $CO_2$ from the composting greenhouse for 70 days was $782{\sim}1154ppm$. This was $1.7{\sim}2.6$ times higher than that of the traditional greenhouse with an average of $440{\sim}462ppm$. $NH_3$ release was highest during $2{\sim}10$ days in intermittent aerated composting and reached to 134 ppm maximum on the 5th day, then decreased rapidly, and maintained at $3{\sim}4ppm$ after 17 days. Increased photosynthesis due to the $CO_2$ gas and a favorable rhizosphere environment due to the increased underground temperature resulted in improved growth, yield, and Brix degree of tomato fruit.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1120-1125
• /
• 2012

To assess fertilizer value of an quasi-aerobically fermented liquid clipped-grass fertilizer, aerobic incubation experiment using two texturally contrasting loam (L) and sandy loam (SL) soils was conducted for 60 days to investigate temporal variations in N mineralization pattern of the liquid fertilizer applied. To do so, the quasi-aerobically fermented liquid clipped-grass fertilizer was prepared, applied to each soil at a rate of 200 kg-N $ha^{-1}$ and aerobically $25^{\circ}C$ in the dark. During incubation, soil water content was adjusted to field moisture capacity (-33 kPa of soil matric potential) by adding distilled water as necessary to maintain their initial weights. At desired time of incubation (0, 1, 5, 10, 20, 40, and 60 days after incubation), soil was sampled and analyzed for inorganic nitrogen ($NH_4{^+}$-N and $NO_3{^-}$-N) concentrations, pH, EC, total carbon contents and total nitrogen contents. Concentrations of $NH_4{^+}$-N began to decrease right after incubation for L soils, and 10 days after incubation for SL soils, while those of $NO_3{^-}$-N began to increase onset of $NH_4{^+}$-N disappearance. The results of this study showed that quasi-aerobically fermented liquid clipped-grass fertilizer could serve as an alternative to chemical N fertilizer.