• Annual Conference of KIPS
• /
• 2011.11a
• /
• pp.104-107
• /
• 2011

의료정보시스템에서 처리하는 데이터 크기가 급속하게 늘어남에 따라 대용량 데이터 처리에 대한 필요성이 갈수록 증가되고 있다. 최근 몇 년 동안 의료정보시스템을 구성하는 요소 중 디스크의 성능 향상 및 발전 속도가 중앙처리장치에 비해 둔화되고 있으며, 이와 같은 성능차이로 인해 디스크 장치가 시스템의 병목지역이 되어 전체 성능을 저하시키는 주된 요인이 되고 있다. 의료정보시스템은 주로 관계형 데이터베이스를 이용하여 저장하기 때문에 서버의 데이터 접근 처리방식과 I/O에 대한 부분이 성능을 크게 좌우한다. 따라서 본 논문에서는 의료정보시스템의 특성에 따른 하드웨어 RAID 디스크 구성 최적화 방안을 알아봄으로써 본 논문의 연구 결과가 시스템 구성 초기에 최적화된 I/O 를 위한 구성정보로 활용될 수 있도록 하고자 한다.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.73.1-73.1
• /
• 2019

We investigate the evolution of the galactic spin of spiral galaxies in various dynamical situations using the N-body/SPH simulations. To do this we first construct a Milky Way-like galaxy model. Then we perform both prograde and retrograde encounters between the spiral galaxy pair. We also conduct a simulation with our galaxy model in isolation for comparison. We find that the circular motion of the disk stars in the inner region of the galaxy decrease clearly when the galaxy experiences strong prograde interactions. Such decrease has not found when the galaxy experiences weak or no interactions. We compare our simulation results with recent observational studies on the galactic spins.

• Biomedical Science Letters
• /
• v.29 no.2
• /
• pp.88-94
• /
• 2023

In oriental medicine, the fruit of Actinidia polygama has long been used to alleviate the symptoms of gout, arthritis, and inflammation. In this study, it was to designed to analyze the antibacterial activity of A. polygama ethanol extract (APEE) against Streptococcus mutans, one of the major strains for dental caries, and Porphyromonas gingivalis, one of the critical strains for periodontal disease. The antibacterial activity of APEE was analyzed by disk diffusion, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) assays. In addition, it was also analyzed the inhibitory effect of APEE on bacterial growth and biofilm formation against both oral pathogens. APEE exhibited its antibacterial effect through the inhibited bacterial diffusion as well as low concentration of MIC and MBC. In addition, APEE significantly inhibited not only bacterial growth but also biofilm formation in a dose-dependent manner. Consequently, APEE showed potent antibacterial activity against both S. mutans and P. gingivalis, which indicates that APEE might be used as a potential antibacterial material for the improvement of oral healthcare.

• Annual Conference of KIPS
• /
• 2022.11a
• /
• pp.721-723
• /
• 2022

최근 낸드 플래시 메모리 기반의 Solid State Drive(SSD)가 기존 Hard Disk Drive(HDD)를 대신하여 개인용과 산업용으로도 널리 쓰이고 있다. 핫 데이터 구분 기법은 이러한 SSD 의 성능과 수명에 중요한 역할을 하는 Garbage Collection(GC)과 Wear Leveling(WL) 기술의 기반이 된다. 본 논문에서는 핫 데이터를 예측하기 위한 나이브 베이즈 분류 기반의 새로운 핫 데이터 구분 기법을 제안한다. 제안 기법은 워크로드 액세스 패턴의 학습 단계인 초기 단계와 실제 운영 단계를 통해 다시 액세스 될 확률이 높은 데이터를 그렇지 않은 데이터와 효과적으로 구분한다. 다양한 실제 trace 기반 실험을 통해 본 제안 기법이 기존 대표적인 기법보다 평균 19.3% 높은 성능을 확인했다.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.6
• /
• pp.412-421
• /
• 2023

As the demand for mechatronic systems and high performance increases in the machinery industry, the importance of improving friction characteristics is emphasized. During relative movement of objects, friction and wear occur on two surfaces in contact, and various methods are being designed to increase the lifespan and energy efficiency of machines. The energy increase effect using lubricants is a well-known method. In this study, a micro-sized rectangular grid pattern was produced by applying a precise micro-pattern photo lithography process. Rectangular grid patterns of the same shape and friction behavior according to the size of the pattern were produced in convex and concave shapes, and the tribological characteristics of each were analyzed.

• Archives of Metallurgy and Materials
• /
• v.64 no.3
• /
• pp.917-920
• /
• 2019

Usually porous metals are known as relatively excellent characteristic such as large surface area, light, lower heat capacity, high toughness and permeability for exhaust gas filter, hydrogen reformer catalyst support. The Ni alloys have high corrosion resistance, heat resistance and chemical stability for high temperature applications. In this study, the Ni-based porous metals have been developed with Hastelloy powder by gas atomization and water atomization in order to find the effects of powder shape on porous metal. Each Hastelloy powder is pressed on disk shape of 2 mm thickness with 12 tons using uniaxial press machine. The specimens are sintered at various temperatures in high vacuum condition. The pore properties were evaluated using Porometer and microstructures were observed with SEM.

• Archives of Metallurgy and Materials
• /
• v.67 no.4
• /
• pp.1531-1534
• /
• 2022

In this study, a SUS316L membrane having double layered pore structures was fabricated, and the pore characteristics were analyzed after coating with a spherical powder and a flake-shaped powder on a disk-shaped SUS316L support using a wet powder spraying process. The thickness of the coated layer was checked using an optical microscope, and air permeability was measured using a capillary flow porometer. When the coating amount was similar, the fine porous layer prepared using flake powder was thicker and showed higher porosity. In the case of a similar thickness, the case of using flake powder was half of the amount of spherical powder used. Therefore, it was confirmed that it is possible to manufacture a metal membrane having a high filter efficiency even with a small coating amount when using the flake powder.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.69-79
• /
• 2013

For real-time interactive multimedia operations, such as video uploading, video play, fast-forward, and fast-rewind, solid state disk (SSD)-based storage systems for video streaming servers are becoming more important. Random access rates in storage systems increase significantly with the number of users; it is thus difficult to simultaneously serve many users with HDD-based storage systems, which have low random access performance. Because there is no mechanical operation in NAND flash-based SSDs, they outperform HDDs in terms of flexible random access operation. In addition, due to the multichannel architecture of SSDs, they perform similarly to HDDs in terms of sequential access. In this paper, we propose a new SSD-based storage system for interactive media servers. Based on the proposed method, it is possible to maximize the channel utilization of the SSD's multichannel architecture. Accordingly, we can improve the performance of SSD-based storage systems for interactive media operations.

• Laser Solutions
• /
• v.17 no.2
• /
• pp.11-18
• /
• 2014

This research was conducted as a fundamental study to apply tailored blank welding technique into automotive production process. Specially we tried to apply the TWB technique to exhaust system. The materials used in this work were ferritic 439 stainless steel sheet with a thickness of 1.2mm and 0.8mm. Welding tests were conducted for BOP test and dissimilar thickness (0.8 to 1.2t) cases. Major process parameters were position of focus, travel speed, shielding gas and joint (gap) condition. As a result, there are nothing significant welding characteristic compare with TWB of carbon steel. Stainless steel shows the good weldability and mechanical properties (tensile, hardness and forming strength) also shows high level. Just problem is gap condition. However, also in this case, it shows not only good forming strength but also base metal fracture after tensile test. And to conclude, it is good opportunity to make lightweight design muffler using TB welding technique.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.197-201
• /
• 2009

Experiments were conducted to study the transition of shrinking flame disk to flame hole in counterflow diffusion flames. The studies of transition are well described by varying burner diameters, global strain rate and velocity ratio. It is experimentally verified that radial conduction heat loss is affected at even high strain rate flames for appropriately small burner diameters. It is also shown that flame extinction modes are grouped into three and particularly, hole or stripe is observed in sufficiently high strain rate flames. There exists critical radius according to burner diameter which divide flame extinction modes into three parts.