• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.322-330
• /
• 2001

The plasma-sprayed 8％Y$_2$O$_3$-Zirconia coating was studied to know the relationship between phase transformation and wear properties after several heat treatment. Wear tests were carried out with ball on disk on 50N, 70N, 90N. The specimen in this study was cast iron and tests were performed on room temperature. The transformation of phase and residual stress was measured by x-ray diffraction method(XRD) and worn surface were observed by SEM.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.479-484
• /
• 2006

This paper presents an active control of the aperture type near-field storage head. In order to achieve a fast and accurate control, a dual servo control algorithm is applied. Based on the big difference in time constants of two actuators, they are used independently. With the combination fine and coarse actuator, the disk is rotated up to 10 rpm speed until the gap is controlled within 100 nm. From the experimental results, the feasibility and the performance of active dual servo gap control is proved.

• Korean Journal of Microbiology
• /
• v.39 no.4
• /
• pp.293-295
• /
• 2003

Total 70 isolates of Escherichia coli obtained from pigs were studied. Forty four isolates had $\textregistered$-hemolytic activity which was heat labile. Minimum inhibitory concentration test indicated that 40 isolates (57.1%), 15 isolates (21.4%), 23 isolates (32.9%), and 5 isolates (7.1%) were resistant to ampicillin, cephalothin, gentamicin, and norfloxacin, respectively. None of them were extended spectrum $\textregistered$-lactamases (ESBLs) producer when the double disk synergy test (DDST) was performed.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.145-149
• /
• 2005

We describe holographic ROM system to read bit-type data. It has optical system similar to general optical data storage system such as DVD. But because holographic data storage systems have to adopt imaging optical system, in our system bit-type data can be read out by different servos with DVD. We devised 3-hole method similar to 3- beam method for the tracking servo and used astigmatic optical system for the focusing servo. Also we developed the reference beam servo to measure movement of reference beam because especially holographic data storage systems need reference beam. The system was operated by these three servos and objective lens of NA 0.6. We obtained eye pattern from random data of 3T-2um track pitch. We also obtained another eye pattern from DVD disk by only using focusing servo PDIC in our system to verify the compatibility with DVD.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.377-381
• /
• 1998

Wear behaviors of unidirectionally oriented $Si_3N_{4w)/Si_3N_4$ composites, sintered at different temperatures with different alignments of whiskers, have been studied in parallel and perpendicular sliding directions with respect to the orientation of the whiskers by using a ball-on-disk reciprocating sliding apparatus. The results show that wear rate in parallel direction is much greater than that in perpendicular direction. With decreasing alignment of the whiskers, the wear rate decreases in parallel sliding direction and increases in perpendicular direction. With increasing sintering temperature, the wear rate increases obviously in both parallel and perpendicular directions.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.431-433
• /
• 1997

In this paper, we consider the robust pole assignment inside the circular region for linear systems with time-varing uncertainty. The considered uncertainties are the norm bounded uncertainty and the matrix polytopes type uncertainty. Since the considered uncertainties are time-varying, it should remind that the closed loop system be time-varing system. Therefore, we should consider not only the pole assignment but also the stability. We present new conditions that guarantee the robust pole assignment and the robust stability. Finally, we show the usefulness of our results by an example.

• Elastomers and Composites
• /
• v.29 no.2
• /
• pp.113-120
• /
• 1994

The vulcanization characteristics, physical and electrical properties have been measured for magnetite-loaded CM compounds containing various concentration of magnetite. Samples of the various concentration of magnetite are characterized by oscillating disk rheometer, mooney viscometer, tensometer and resistance meter. The morphology and dispersion of magnetite are analyzed by scanning electron microscope(SEM). The results obtained are as follows : 1. The CM compound without magnetite shows plain curve, while the CM compounds containing magnetite show short curves. 2. The maximum volume of magnetite is 600 phr in the CM compounds. The magnetite of 30 to 150 phr of magnetite act as reinforcement agents and the 50 phr magnetite shows maximum tensile strength. 3. The electric conductivity is mostly influenced by the conditions of temperature, compacting pressure, and magnetite orientation. Further efforts should be made to develop a new design in various electric conductivity fillers for the most efficient and applicable rubber products.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.334-337
• /
• 2007

Austenitic stainless steel is used as high temperature components such as gas turbine blade and disk because of its good thermal resistance. In the present investigation, tensile and low cycle fatigue(LCF) behavior of stainless steel for turbine disks was studied at wide temperature range $20^{\circ}C\;{\sim}\;750^{\circ}C$. In the tensile tests, it was shown that elastic modulus, yield strength, ultimate tensile strength decreased when temperature increased. The effect on fatigue failure of the parameters such as plastic strain amplitude, stress amplitude and plastic strain energy density was also investigated. Coffin-Manson and Morrow models were used to adjust experimental data and predict the fatigue life behavior at different mean strain values during cyclic loading of high temperature components.

• Korean Journal of Veterinary Service
• /
• v.33 no.1
• /
• pp.23-27
• /
• 2010

This survey was performed to investigate the seroprevalence of antibodies to Brucella canis in dogs from public animal shelters and breeding kennels in Incheon. A total of 402 dogs selected randomly were tested serologically by using immunochromatographic antibody test kit. None of 289 dogs in public animal shelters were sero-positive and 10 (8.9%) of 113 dogs in breeding kennels were sero-positive. 5 (4.4%) strains of Brucella canis were isolated from 10 sero-positive dogs' blood. Antimicrobial susceptibility test was carried out by Disk diffusion method. They were susceptible to tetracyclines, quinolones, aminoglycosides and combination amoxicillin with clavulanic acid.

• International Journal of Contents
• /
• v.3 no.3
• /
• pp.1-5
• /
• 2007

The main memory DBMS (MMDBMS) efficiently supports various database applications that require high performance since it employs main memory rather than disk as a primary storage. An index manager is an essential sub-component of a DBMS used to speed up the retrieval of objects from a large volume of a database in response to a certain search condition. Previous research efforts on indexing proposed various index structures. However, they hardly dealt with the practical issues occurred in implementing an index manager on a target DBMS. In this paper, we touch these issues and present our experiences in developing the index manager. The main issues are (1) compact representation of an index entry, (2) support of variable-length keys. (3) support of multiple-attribute keys, and (4) support of duplicated keys.