• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1527-1530
• /
• 2005

In the semiconductor and optical industry the non-contact transportation is required for reducing the damages. The ultrasonic levitation is the solution of the problem. In this paper, the ultrasonic levitation system and 3 disk-type stator for levitation various object are proposed. The vibration modes of disks are analyzed with FEM and designed with the analysis results. The 3D vibration profiles of the disks are measured by Laser scanning vibrometer for verifying the vibration characteristics of the system. The amplitudes of the disks and the levitation heights of object are measured for evaluating the performance.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.150-155
• /
• 2002

Generally, Oxidization film are generated by friction and wear in lubricant oil. It is effect that the heat and pressure act on contact area. Because the electrons movement progress the oxidization, if the electrons movement be regulated, the thickness of oxidization film can be regulated and friction characteristics can be improved. But electronic current can deteriorate friction characteristics, so various characteristics must be investigated on transforming of electronic current. Therefor, using the Norton equation, short current were transformed between ball and disk. Also, an experiment was carried out using ball on disk type tester. So, we studied up on effect of current for friction characteristics.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.1 no.1
• /
• pp.99-104
• /
• 1995

Markolf and Morris suggests that the deranged disk and torn annulus have an exellent recovery ability from the position of spine extension, where the posterior annulus is not under stress and the gel can move anterioly. McKenzie explains side gliding as a combination of rotation and side bending, his clinical studies indicate that side-gliding can gel laterally. In conclusion, the prone unilateral traction on the opposite side from the patient's pain along with the other treatment appered to have helped reduce those patient's pain. The method of treatment described in this report is suggested for Korean physical therapists who treat patients suspected of posterolateral herniated nucleus pulposus.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1895-1901
• /
• 1999

The characteristics of a disk-loaded cylindrical dipole (DLCD) antenna that determine its performance are analyzed by using the method of moments. The current integral equation that is considered with extended boundary condition is derived. Numerical results for the input impedance and radiation pattern of the antenna are presented. The antenna factor with the antenna gain is computed to check the possibility of using this antenna as the broadband antenna for the special case in such as electromagnetic compatibility testing. The comparisons of the computed results with measured data are made. These results will allow this antenna to be used with confidence in various applications.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1747_1748
• /
• 2009

하드디스크드라이브(Hard Disk Drive)의 트랙 탐색에서의 초기 조건을 고려한 시간 최적화 문제에 대한 해를 보인다. 이에 대한 유도에서는 전류, 전압, 저크뿐만이 아니라 액추에이터의 동역학식 또한 고려한다. 이렇게 구한 시간 최적화 문제의 해는 3차 상태 변수의 피드백 형태로 나타난다. 초기 조건을 고려함으로써 0이 아닌 임의의 초기 조건에 대해서도 시간 최적화 경로를 산출할 수 있다. 따라서 하드디스 크드라이브의 암이 정지 상태가 아닌 상황에서도 목표 위치 수정이 가능하므로 기존의 목표 위치와 다른 새로운 목표 위치에 대한 입력에 대해서도 빠른 응답을 기대할 수 있다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1416-1421
• /
• 2007

In this paper, a novel MR brake with permanent magnet is developed. This system consists of rotary disk, permanent magnet, spring and MR fluid. Permanent magnets are attached to the rotary disk and moves in the direction of radius. The magnets are linked to rotor axis by spring. As rotation speed increases, the magnets move outward from the center of the system by centrifugal force in the MR fluid. A proper design of stator or case makes the system have unique torque characteristics. To show the performance of the system, the research is performed by following procedure. First, the electromagnetic characteristic of the system is analyzed using FEM and commercial code, Maxwell is used for this analysis. Then, torque is calculated using the result of the electromagnetic analysis to validate the performance of the system.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.203-208
• /
• 2001

In this paper, a novel dual-type positioning mechanism using a voice coil motor(VCM) and a piezoelectric actuator is proposed for optical disk drive or near-field recording type drive. The VCM is used for a coarse motion actuator and the piezoelectric actuator, "S" configuration deflection motion when voltage applied, is used for a fine motion actuator with self-sensing technique, which allows it to sense and actuate simultaneously in a closed loop frame work. When the VCM rotates and stops, a position feedback control algorithm is adopted to further control residu vibration. The performance of the control scheme is confirmed through simulations and experiments.

• Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.170-173
• /
• 2009

This study examined the special technique of photocatalytic degradation (RPODisk) for removal of taste and odor causing materials, algae, and algal toxin. The RPODisk was effective for removal of these troublesome contaminants. It outperformed the fixed media and the UV irradiation for geosmin removal. The RPODisk performance was comparable to the combination of the UV irradiation with TiO2. The RPODisk performance was affected by the rotating speed. The faster the speed was, the better the performance. The RPODisk was also effective for removal of algae and algal toxin. The algal activity reduced by 80% after 30 mins of the treatment. More toxic microcystin (MC)-LR was more difficult to remove than MC-RR. The times for 50% removal were 23.7 mins for MC-LR and 14.1 mins for MC-RR. Almost 100 mins of the contact time was required to completely remove MC-LR at the rotating speed of 260 rpm.

• Journal of Korean Physical Therapy Science
• /
• v.2 no.2
• /
• pp.481-486
• /
• 1995

Markolf and Morris suggests that the deranged disk and torn annulus have an exellent recovery ability from the position of spine extension, where the posterior annulus is not under stress and the gel can move anterioly. McKenzie explains side gliding as a combination of rotation and side bending, his clinical studies indicate that side-gliding can gel laterally. In conclusion, the prone unilateral traction on the opposite side from the patient's pain along with the other treatment appered to have helped reduce those patient's pain. The method of treatment described in this report is suggested for Korean physical therapists who treat patients suspected of posterolateral herniated nucleus pulposus.

• Tribology and Lubricants
• /
• v.27 no.2
• /
• pp.65-70
• /
• 2011

The power servo cylinder for driving accurately turbine stop valve of an atomic power plant is necessary to do turn-over owing to a leakage of oil and a structure problem, especially, it of a power plant be in demand a high quality standard depends entirely on import. There are much problem that the AlBC be to used as a material of piston head in cylinder are caused by wear. Therefore, it is necessary to examine friction characteristics of it. In this study, wear test experiments was carried out with AlBC and SCM440, using reciprocating friction tester of pin on disk. This result was shown that the wear mechanism of AlBC on working condition is adhesive wear and the maximum temperature of infra redray thermal image of frictional surface show over 2 mm from contact surface of pin and disk.