• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.372-375
• /
• 2003

Using disturbance observer is effective to enhance tracking performance of system in the presence of disturbances. Various types of disturbance observers have been proposed to improve sensitivity of systems, but they tend to bring poor transient response due to cross coupling of inter-loops. In this paper, we propose dual disturbance observer(Dual DOB) which is designed to reduce the cross coupling. Dual DOB is consist of an internal DOB and an external DOB, that are designed for different object. The Dual DOB is applied to Optical Disk Drive tracking system. It is shown that the Dual DOB has improved performance over conventional DOB via experimental result. There is good agreement between simulation and experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.305-309
• /
• 2005

A computer code was developed to simulate all three stages of the injection molding process ? filling, packing and cooling by finite element method. The constitutive equation used here was compressible Leonov model. The PVT relationship was assumed to follow the Tait equation. The flow-induced birefringence was related to the calculated flow stresses through the linear stress-optical law. Based on the simulation, the Taguchi method was used to investigate the influences of injection molding conditions on the birefringence of a center gate disk. In addition, the optimal processing conditions were selected to minimize the birefringence and the birefringence difference along the positions of the disk.

• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2245-2252
• /
• 2005

Thermal stratification in the branch piping of power plants can be generated by turbulent penetration or by valve leakage. In this study, a numerical analysis was performed to estimate the thermal stratification phenomenon by in-leakage in the SIS branch piping of nuclear power plant. Leakage rate, leakage area and leakage location were selected as evaluation factors to investigate the thermal stratification effect. As a result of the thermal stratification effect according to leakage rate, the maximum temperature difference between top and bottom of the horizontal piping was evaluated to be about 185K when the valve leakage rate was about 10 times as much as the allowed leakage rate. For leakage rate more than 10 times the allowed leakage rate, the temperature difference was rapidly decreased due to the increased mixing effect. In the result according to leakage area, the magnitude of temperature difference was shown in order of $3\%,\;1\%\;and\;5\%$ leakage area of the total disk area. In the thermal stratification effect, according to the leakage location, temperature difference when leakage occurred in the lower disk was considerably higher than that of when leakage occurred in the upper disk.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.253-255
• /
• 2003

Electricity is the prime commodity in mobile device, e.g. smart phone, PDA, MP3 player and etc. This strict restriction on power consumption requirement of the mobile device puts unique demand in designing hardware and software components of the device. In this paper, we address the issue of minimizing the power consumption in retrieving the continuous media data from the disk drive for real-time playback purpose. Different from the legacy text based data, real-time multimedia playback requires that the storage supplies the data block continuous fashion. This may put immense burden on the power scarce environment since the disk Is required to be active for the entire playback duration. We develop elaborate algorithm which carefully analyzes the power consumption profile of the disk drive and which establishes the data retrieval schedule for the given playback. It computes the amount of data blocks to read, the length of active and standby period. According to our simulation result, the ARM algorithm exhibits superior performance in continuous media retrieval from the aspect of power consumption to legacy playback scheme.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.238-239
• /
• 2012

ZnO disk는 Ar 가스의 ON/OFF 사이클을 사용한 기상 이동법으로 성장하였다. 온도 의존성 photoluminescence (PL)은 PL 스펙트럼의 quenching 동작을 관장하는 메커니즘을 연구하기 위해 조사하였다. ZnO disk의 12 K PL 스펙트럼에서 3.364, 3.315, 3.244, 3.212, 3.170, 3.139, 3.100 eV의 피크를 관측되었고, 그것은 각각 excitons bound to neutral donors ($D^{\circ}X$), A-line, first-order longitudinal optical (1LO) phonon replica of A-line (A-1LO), donor-to acceptor pair (DAP), A-2LO, DAP-1LO, A-3LO 이다. $D^{\circ}X$와 A-line 피크는 Varshni 공식에 의해서 피팅을 하였고, 도너 이온화 에너지는 40 meV 이었다. Free excitons, $D^{\circ}X$, A-line의 lifetime은 이론적으로 계산하였고, 온도가 증가함에 따라 lifetime이 증가하였다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.695-701
• /
• 1995

Fundamental issues and general procedures of modeling the head disk interface (HDI) in order to provide design criteria for future ultra-low flying sliders are given. Intermittent contact and gaseous rarefaction effects are discussed using nonconventional kinetic theory. To illustrate the simulation results, we modeled IBM 3370 taper flat sliders and positive/negative "bow tie" sliders. Several alternative HDI concepts for future disk drives - viscoelastic bearings, a hybrid system, and contact recording - are also briefly discussed.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.67.3-67.3
• /
• 2019

Massive stars play an important role in terms of their feedback, but their formation process is poorly understood. Direct observational evidence for the formation of massive stars through accretion disks is rare. Hence the detection of disks in massive young stellar objects (MYSOs), if any, could be important to constrain the formation process of massive stars. The inner gaseous disk can be observed by the high-resolution near-infrared spectroscopy. We observed a MYSO, Min 2-62, using IGRINS and detected a double peak feature, which could be an evidence of a rotating disk, in the Bracket and Pfund series lines. We report the preliminary observational results of Min 2-62 with IGRINS.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.474-478
• /
• 2006

It is becoming more significant to develop a rotary voice coil motor(VCM) type's actuator for small form factor (SFF) optical disk drive(ODD), as portables are getting more and more popularized nowadays. The actuator which is applicable to small-sized ODD with a compact flash(CF) II card size was developed and fabricated. The experimental results showed that the finite element(FE) model is different from the fabricated model. And so flexible mode frequencies did not satisfy specifications of small-sized ODD, and tuning. Tuning procedures were required to improve dynamic characteristics of the fabricated actuator through finite difference method(FDM). At first, design variables were extracted through parameter study and the tuned FE model was improved by design of experiment(DOE). Consequently, It was confirmed that the improved model was applicable to SFF ODD.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.479-483
• /
• 2006

As high-definition television(HDTV) broadcasting were generalized, there have been many researches and developments about large storage capacity and fast data transfer rate in optical disk drives(ODD). Pickup actuators must have high flexible mode frequencies and gain margins. Flexible modes are caused by the flexibility of moving parts in the actuator and a servo bandwidth is limited by them. As a result, the system becomes unstable for high-speed operations in high density reading and recording. In this paper, we suggest improved modeling method that considers the bonding layer. And, flexible mode frequency of actuator is improved by Design of Experiment of lens holder. Magnet circuit is designed considering the relation with moving part. Through improving yoke design, the magnetic flux is changed and DC tilt is reduced. Consequently, we designed actuator which has high flexible mode frequency and gain margins.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1347-1353
• /
• 2004

With respect to the researches of the optical flying head(OFH) , the head-gimbal assembly should be analyzed to guarantee the stable fabrication and the characteristics of shock resistance. The suitable design is proved through the Probabilistic analysis of the design parameters and material properties of the model. Probabilistic analysis is a technique that be used to assess the effect of uncertain input parameters and assumptions on your analysis model. Using a probabilistic analysis you can find out how much the results of a finite elements analysis are affected by uncertainties in the model. Another factor is analysis of the dynamic shock analysis. For the mobile application, one of the important requirements is durability under severe environmental condition, especially, resistance to mechanical shock. An important challenge in the disk recording is to improve disk drive robustness in shock environments. If the system comes in contact with outer shock disturbance. the system gets critical damage in head-gimbal assembly or disk. This paper describes probabilistic and dynamic shock analysis of head-gimbal assembly in micro MO drives using OFH slider.