• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1067-1070
• /
• 2002

We have examined the impedance characteristics and the battery characteristics of PLI bicell. As results, the impedance of PLI bicell with 62 wt% cathode active material were lower than the other cathode active material content. And the specific resistances of PLI bicell increased with N/P ratio until 1.85. And the impedance of PLI bicell decreased with increased adding amounts of binder. But the rate capability of PLI bicell were not increased with increased adding amounts of binder. PLI bicell with 9.9 wt% binder content were the best rate capability. but the cycleability were not the same results as the rate capability. PLI bicells with cathode with more than 11 wt% binder, their cycleability were almost same, nevertheless they were better cycleability than 9.9 wt% binderl content.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.429-430
• /
• 2010

In this study, the carbonation characteristic of highly flowable HVFAC with silica fume content was reported. As results, it appeared that when the silica fume content was $10{\sim}20kg/m^3$, the fludity and dynamic stability were highly improved. And the carbonation coefficient increases exponentially with increasing silica fume content.

• Food Science and Biotechnology
• /
• v.14 no.2
• /
• pp.280-285
• /
• 2005

Applicability of near infrared reflectance spectroscopy (NIRS) was examined for quality control of red pepper powder in milling factories. Prediction of chemical composition was performed using modified partial least square (MPLS) techniques. Analysis of total 51 and 21 red pepper powder samples by conventional methods for calibration and validation, respectively, revealed standard error of prediction (SEP) and correlation coefficient ($R^2$) of moisture content, ASTA color value, capsaicinoid content, and total sugar content were 0.55 and 0.90, 8.58 and 0.96, 31.60 and 0.65, and 1.82 and 0.86, respectively; SEP and $R^2$ were low and high, respectively, except for capsaicinoid content. The results indicate, with slight improvement, on-line quality measurement of red pepper powder with NIRS could be applied in red pepper milling factories.

• Journal of Hydrogen and New Energy
• /
• v.15 no.2
• /
• pp.144-151
• /
• 2004

The effect of the cobalt content on the thermodynamic and, heat and mass transfer properties of the $MmNi_{5-y}B_{y-z}C_z(y=0.5{\sim}1.5,\;z=0.5)$hydrogen storage alloys has been studied systematically. The P-C isotherms curves show that with increasing cobalt content in the alloys, the plateau pressure of the hydrogen absorption and desorption and enthalpy(${\Delta}H$) increases steeply and the plateau region becomes flat, while entropy(${\Delta}S$) decreases. Also at the constant cobalt content the hydrogen transfer rate decreases with the reaction temperature, while the initial reaction kinetics increases. But the initial reaction with hydrogen completes within 1min, although the reaction proceeds about 30minutes thereafter.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.58-64
• /
• 2004

The shrinkages of injection molded parts are different in molding operational conditions, resins and additives. The shrinkage of injection molded part for crystalline polymer, PBT (polybutylene terephthalate) has been studied for various operational conditions of injection molding and content of additives. Mica was used as a additive to PBT to examine the part shrinkage according to the mica content. The part shrinkages of mica contained PBT decreased as mica content increases. Higher injection temperature and injection pressure resulted in a lower shrinkage. As mold temperature increases the part shrinkage decreased. The part shrinkage of flow direction was less than that of the perpendicular direction to the flow for both pure and mica contained PBT. However the shrinkage difference between flow and perpendicular to flow directions decreased as mica content increased.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.675-680
• /
• 2008

The effect of pore former content on both porosity and pore structure was investigated for porous sintered reaction-bonded silicon nitrides (SRBSNs). A spherical PMMA with $d_{50}=8{\mu}m$ was employed as a pore-former. Its amount ranged from 0 to 30 part. Porous SRBSNs were fabricated by post-sintering at various temperatures where the porosity was controlled at $12{\sim}52%$. The strong tendency of increasing porosity with PMMA content and decreasing porosity with sintering temperature was observed. Measured pore-channel diameter increased $(0.3{\rightarrow}1.1{\mu}m)$ with both PMMA content and sintering temperature.

• Korean Journal of Plant Resources
• /
• v.28 no.3
• /
• pp.329-332
• /
• 2015

The effect of storage temperature and the storage period of hardy kiwifruits on the fruit firmness, soluble solids and fruit weight were studied in this work. The investigation was carried out on the Sae-Han cultivar of Actinidia arguta. It has an edible smooth skin and contains high amounts of sugar and vitamin C (ascorbic acid). In this research, the measurement of fruit firmness, soluble solids, and fruit weight were carried out at various temperatures (5, 10, 15, and 20℃) during 14 days. Fruit firmness rapidly decreased and soluble solids content increased at 15 and 20℃. We also investigated the correlation between fruit firmness and soluble solids content. There was a strong correlation between fruit firmness and soluble solids content. That means that fruit firmness affect the soluble solids content of hardy kiwifruit.

• The Journal of Korean Association of Computer Education
• /
• v.6 no.4
• /
• pp.31-36
• /
• 2003

In the past few years, enormous improvements have been obtained in the field of content-based image retrieval (CBIR). This paper presents a comprehensive survey on the current CBIR systems and some of their challenging technical aspects, which stand as an obstacle on its way to become successful. Furthermore, we have focused on the current state of semantic image retrieval and also we have suggested future promising directions for further research.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1717-1726
• /
• 2008

Vibration triaxial compression test was put in influence for liquefaction strength of fine grained soil of dredged and reclaimed ground and consideration for fine fraction content, relative density, overconsolidation ratio and plasticity index in this study. By the results of these test, the liquefaction strength increased with fine fraction content and the relative density, overconsolidation ratio incresed with liquefaction strength too. However, in the case of nonplastic silt was the smalist liquefaction strength which influenced by dilatancy and interlocking when silt content was 34.7%(average grading 0.12mm). Therefore, liquefaction strength of fine grained soil of dredged and reclaimed ground increased with fine fraction content so it will help to make lower liquefaction.

• Journal of Information Technology Applications and Management
• /
• v.27 no.4
• /
• pp.49-62
• /
• 2020

In this study, the research model of VR·AR contents convergence education for solving social problems was presented after benchmarking the domestic and foreign realistic educational contents industry and policy trends and Fishbone diagram analysis. The goal was to create VR·AR content convergence talent for co-prosperity in the era of the fourth industrial revolution, and the target of education was students, researchers, and business personnel who are interested in VR AR technology education and contents business such as game animation, etc. The education model is based on understanding about storytelling of the socially disadvantaged, such as children and the elderly, and is technology education for content production including the application of virtual and augmented reality SW, and is a convergence education for content planning and business model strategy development.