• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권3호
• /
• pp.108-111
• /
• 2002

This paper proposes an new water mark embedding and extraction technique which extends the direct sequence spread spectrum technique. The proposed technique approximates the complexity of image and block in spatial domain using Laplacian filtering and watermark is adaptively embedded in the mid-frequency DCT components. Local parity bits are attached to higher-frequency DCT components and they are used to detect extraction errors and correct those errors. In extraction process the proposed method boosts the higher frequency components of image and extracts the watermark by demodulation and this information is verified and adjusted by parity bits. Experimental results show it is invisible and robust to several external attacks.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2023-2024
• /
• 2006

1962년 Gallager에 의해 처음 제안된 LDPC 부호는 복호를 수행하는 부호방식으로 패리티 행렬(H)의 대부분이 0으로 구성되어 복호시에 적은 연산량을 요구하며, shannon의 한계에 도달하는 복호 능력으로, 차세대 통신의 주된 부호 방식으로 고려되고 있다. 하지만, LDPC는 부호화에 있어서 여타 다른 부호방식에 비해 복잡한 특성을 가지고 있으므로, 이를 개선하기 위한 부호방식의 적용이 필요하다. 본 논문에서는 효율 적인 부호화를 위하여 Dual-diagonal H parity행렬을 구성 하고, 쉽게 부호 길이를 확장 할 수 있는 Quasi-Cyclic 방식을 적용한 복호기를 구현하였다.

• 제어로봇시스템학회논문지
• /
• 제15권10호
• /
• pp.1002-1008
• /
• 2009

We consider a double faults detection and isolation problem using modified extended parity space approach for inertial measurement unit which use redundant inertial sensors. A redundant IMU which has a hardware redundant is composed of the cone shape because it is good for fault detection and isolation. We analyze the type of double faults and the reason why fault isolation performance is low. We propose modified extended parity space approach method using EPSA and the difference of sensor data.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권6호
• /
• pp.333-341
• /
• 2003

In induction motor control systems driven by the indirect vector control scheme, the rotor speed is measured to determine the flux angle which is a key variable in the control algorithm. The most popular way to measure the angular velocity is the use of rotary encoder. Since the errorneous measurement of rotor speed results in incorrect flux angle estimate, the control input generated based on the faulty information should be far from the desired (correct) value and deteriorates the overall control performance. In this paper the effects of encoder fault on motor variables and control performance are analyzed by both theoretical approach and experimental study. A parity equation based on the Power is suggested and applied to detect the incipient fault of encoder.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.161-162
• /
• 2008

In this paper we design an irregular low-density parity-check (LDPC) code for a multi-input multi-output (MIMO) system. The considered MIMO system is minimum mean square error soft-interference cancellation (MMSE-SIC) detector. The MMSE-SIC detector and the LDPC decoder exchange soft information and consist a turbo iterative detection and decoding receiver. Extrinsic information transfer (EXIT) charts are used to obtain the edge degree distribution of the irregular LDPC code which is optimized for the input-output transfer chart of the MMSE-SIC detector. It is shown that the performance of the designed LDPC code is much better than that of conventional LDPC code optimized for the AWGN channel.

• Journal of Communications and Networks
• /
• 제17권4호
• /
• pp.346-350
• /
• 2015

It is known that the progressive edge-growth (PEG) algorithm can be used to construct low-density parity-check (LDPC) codes at finite code lengths with large girths through the establishment of edges between variable and check nodes in an edge-by-edge manner. In [1], the authors derived a class of LDPC codes for relay communication systems by extending the full-diversity root-LDPC code. However, the submatrices of the parity-check matrix H corresponding to this code were constructed separately; thus, the girth of H was not optimized. To solve this problem, this paper proposes a modified PEG algorithm for use in the design of large girth and full-diversity LDPC codes. Simulation results indicated that the LDPC codes constructed using the modified PEG algorithm exhibited a more favorable frame error rate performance than did codes proposed in [1] over block-fading channels.

• 한국가축번식학회지
• /
• 제25권3호
• /
• pp.227-230
• /
• 2001

송아지의 성에 영향을 미치는 인자를 알고 이를 활용한다면 한우산업의 경쟁력을 재고시킬 수 있을 것으로 사료되며, 따라서 본 연구에서는 송아지 성비에 영향을 미칠 것으로 예상되는 요인의 효과를 분석하고 나아가서 원하는 성의 송아지를 선택할 수 방안을 제시하고자 실시하였다. 인공수정에 의해 태어난 송아지의 성비는 수정년도와 빈우의 산차에 의해 영향을 받지 않았으나, 종모우와 농가에 따라 송아지의 성비에 차이가 있었다. 따라서 원하는 성의 송아지를 생산하기 위해서는 적정 종모우를 선택하여 인공수정하고 빈우를 적정 사양 환경에서 사육하여야 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.131-131
• /
• 2000

In this paper, a design method of a fault diagnosis filter for a system with multiplicative faults which cause to change its parameters is developed. Linear time-invariant systems are dealt with in discrete-time domain. The residual which is sensitive to a damage of control surface of an aircraft by parity space approach is defined. Next, the fault is isolated by a new decision logic. Control reconfiguration is achieved by the result of fault diagnosis. Finally, the feasibility of the method is illustrated with a simulation study of a fault diagnosis system for a damaged control surface of an aircraft.

• Journal of Communications and Networks
• /
• 제11권5호
• /
• pp.455-463
• /
• 2009

We consider the challenges of finding good puncturing patterns for rate-compatible low-density parity-check code (LDPC) codes over additive white Gaussian noise (AWGN) channels. Puncturing is a scheme to obtain a series of higher rate codes from a lower rate mother code. It is widely used in channel coding but it causes performance is lost compared to non-punctured LDPC codes at the same rate. Previous work, considered the role of survived check nodes in puncturing patterns. Limitations, such as single survived check node assumption and simulation-based verification, were examined. This paper analyzes the performance according to the role of multiple survived check nodes and multiple dead check nodes. Based on these analyses, we propose new algorithm to find a good puncturing pattern for LDPC codes over AWGN channels.

• 대한전기학회논문지
• /
• 제43권7호
• /
• pp.1169-1177
• /
• 1994

The function estimation characteristics of neural networks can be used sensor signal estimation of the nuclear power plants. In case of applying the neural network to the signal estimation of redundant sensors, it is an important problem that the redundant sensor signals used as the input signals of neural network should be validated. In this paper, we simplify the conventional parity space method in order to input the validated signal to the neural network and lso propose the sensor signal validation method, which estimates the reliable sensor output combining the neural network with the simplified parity space method. The acceptability of the proposed process variable estimation method is demonstrated by using the simulation data in safety injection accident of the nuclear power plant.