• Journal of the Korean Geosynthetics Society
• /
• v.11 no.4
• /
• pp.71-77
• /
• 2012

In this study, data collected from geotechnical instrumentation, analyzers using Stochastic methods for evaluating the state of law and the automation program was developed. Is expected based data driven non-parametric methods modeling may be useful for evaluation of complex geotechnical instrumentation installed on the system from the measurements collected. Result of the verification of assessment techniques developed by the sensing data collected from the actual ground structures (reinforced retaining wall and tunnel), PCA analysis techniques applied to the present study was to determine the structural behavior and environmental factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2505-2510
• /
• 2013

Parametric studies on nonhomogeneous pile and homogeneous pile installed in clay were performed through the developed technique to investigate the effects of considered factors on the lateral pile behaviors. Values of the parameters with embedment depths of the two piles having different flexural rigidity show that values of the parameters for more rigid pile were greater than those for smaller one. Parameters for the case of the nonhomogeneous pile were converged to the same ones of the homogeneous pile as nodal point moves away from point of material boundary. In order to determine adequate upper length of the nonhomogeneous pile, changing patterns of the parameters, lateral displacement, member forces and so forth should be compared.

• Korean Journal of Organic Agriculture
• /
• v.24 no.2
• /
• pp.169-188
• /
• 2016

The purpose of this study is to analyze willingness to pay (WTP) for organic agricultural products. To accomplish the objective of the study, a consumer survey was conducted. Based on the pilot survey results, parametric survival model was used to analyze the WTP for organic products. The estimation results showed that the WTP for organic agricultural products is 1.4-fold when compared with the conventional products, which is lower than the current price by about 30 percent. The analytical results also showed that such variables as gender, recognitions for organic agricultural products, and consumers' income have very significant effects on the WTP, and that there are no differences among WTPs by consumption goals. Based on major findings, the most effective countermeasure was suggested for expanding of organic food consumption through the premium reduction of organic products. Reducing the costs of production and distribution, supporting farmers' income by direct payment system were presented. Furthermore, it is needed to allocate more budget for promoting the consumption and distribution of organic agricultural products, and for enhancing conservation of agricultural environment.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.1
• /
• pp.31-40
• /
• 2009

This study is intended to suggest methodologies in theory that is dedicated to improve existing features in BlM tool sets and introduce a new horizon for developing new features in the future so that more functionality can be provided to the work process of architect. To be more utilized of BlM tool sets in a useful way, it is important to make sure to program a calculation method used in the design process which is based on the information provided by architect, such as design item with detailed process and transformed parametric information on warranty data. Finding pros and cons in the usability from the well-known 3D modeling applications and taking highly usable UI features from the existing applications, and using a common wording were carried out. Design architect identifies reusable parametric information and then finds an algorithm between each items so that BlM tool sets can contribute to design field in the future. Therefore, the formula has been developed for the items considering business aspects and architecturing size in the preliminary-design, and design aspects in the schematic design with idendifying inputs and outputs that is necessary to become fixed factors.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.145-151
• /
• 2012

The purpose of the present study is to suggest the development direction for the neutral library which can describe the parametric modeling and design algorithm to design the construction spatial information which is known as BIM. To do this, we surveyed the recent research related to neutral library and analyzed the library technology of BIM modeler such as Revit, Archicad. By using this result, we suggested the development direction based on BIM description script language for the neutral BIM library including the parametric design and the algorithm definition.

• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.5
• /
• pp.11-18
• /
• 2013

This study has revisited the definition and characteristics of BIM to contribute to the better understanding of this concept. For the successful application of BIM in architectural design field, it should start with public buildings like schools which can be standardized. Since a number of conditions of school design appear to suit the schematic design phase for BIM application more than do other types of building design, the viability of BIM was examined by applying parametric modeling(one of BIM's basic characteristics) to mass study in schematic design phase for the configuration of schools that adopt the variation type of subject classroom design of the $7^{th}$ National Educational Curriculum. In addition, this modeling technique was used with software of Rhino 3D and Grasshopper, which will have a linkage to environmental analysis in near future. Finally, it can be expected that the work efficiency will be maximized if BIM is going to be applied in the early design stage instead of the end stage.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.2
• /
• pp.109-122
• /
• 2019

The purpose of this study is to examine the clothing component information and attributes as the control parameters for the 3D modeling process of the biomorphic clothing sculpture using a parametric methodology. The 3D modeling parameters of biomorphic clothing sculpture were identified as exaggerated silhouette, surface texture, and digital color. The types of exaggerated silhouettes were shoulder and hip exaggeration, shoulder exaggeration, hip exaggeration, vertical exaggeration, and horizontal exaggeration. The types of surface texture were embossed, lacy, furry, and complex textures. The types of digital color were chrome, blur, blend, and acid colors. The characteristics of morphological representation due to the attributes of these control variables were identified as morphological variation, organic morphology, organizational morphology, and realistic morphology. As a result, it was found that the parameter attributes were applied to the biomorphic clothing sculpture parametric design process and developed into various shapes.

• Geomechanics and Engineering
• /
• v.29 no.3
• /
• pp.301-310
• /
• 2022

Accurate prediction of mixed ground conditions ahead of a tunnel face is of vital importance for safe excavation using tunnel boring machines (TBMs). Previous studies have primarily focused on electrical resistivity surveys from the ground surface for geotechnical investigation. In this study, an FE (finite element) numerical model was developed to simulate electrical resistivity surveys for the prediction of risky mixed ground conditions in front of a tunnel face. The proposed FE model is validated by comparing with the apparent electrical resistivity values obtained from the analytical solution corresponding to a vertical fault on the ground surface (i.e., a simplified model). A series of parametric studies was performed with the FE model to analyze the effect of geological and sensor geometric conditions on the electrical resistivity survey. The parametric study revealed that the interface slope between two different ground formations affects the electrical resistivity measurements during TBM excavation. In addition, a large difference in electrical resistivity between two different ground formations represented the dramatic effect of the mixed ground conditions on the electrical resistivity values. The parametric studies of the electrode array showed that the proper selection of the electrode spacing and the location of the electrode array on the tunnel face of TBM is very important. Thus, it is concluded that the developed FE numerical model can successfully predict the presence of a mixed ground zone, which enables optimal management of potential risks.

• Wind and Structures
• /
• v.34 no.4
• /
• pp.321-334
• /
• 2022

Irregularity in plan shape is very common for any type of building as it enhances better air ventilation for the inhabitants. Systematic opening at the middle of the facades makes the appearance of the building plan as a butterfly one. The primary focus of this study is to forecast the force, moment and torsional coefficient of a butterfly plan shaped tall building. Initially, Computational Fluid Dynamics (CFD) study is done on the building model based on Reynolds averaged Navier Stokes (RANS) k-epsilon turbulence model. Fifty random cases of irregularity and angle of attack (AOA) are selected, and the results from these cases are utilised for developing the surrogate models. Parametric equations are predicted for all these aerodynamic coefficients, and the training of these outcomes are also done for developing Artificial Neural Networks (ANN). After achieving the target acceptance criteria, the observed results are compared with the primary CFD data. Both parametric equations and ANN matched very well with the obtained data. The results are further utilised for discussing the effects of irregularity on the most critical wind condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.11
• /
• pp.1525-1528
• /
• 2011

The purpose of this study was to detect SNPs that were responsible for a carcass trait in Hanwoo populations. A non-parametric model applying a restricted partition method (RPM) was used, which exploited a partitioning algorithm considering statistical criteria for multiple comparison testing. Phenotypic and genotypic data were obtained from the Hanwoo Improvement Center, National Agricultural Cooperation Federation, Korea, in which the pedigree structure comprised 229 steers from 16 paternal half-sib proven sires that were born in Namwon or Daegwanryong livestock testing station between spring of 2002 and fall of 2003. A carcass trait, longissimus dorsi muscle area for each steer was measured after slaughter at approximately 722 days. Three SNPs (19_1, 18_4 and 28_2) near the microsatellite marker ILSTS035 on BTA6, around which the quantitative trait loci (QTL) for meat quality were previously detected, were used in this study. The RPM analyses resulted in two significant interaction effects between SNPs (19_1 and 18_4) and (19_1 and 28_2) at ${\alpha}$ = 0.05 level. However, under a general linear (parametric) model no interaction effect between any pair of the three SNPs was detected, while only one main effect for SNP19_1 was found for the trait. Also, under another non-parametric model using a multifactor dimensionality reduction (MDR) method, only one interaction effect of the two SNPs (19_1 and 28_2) explained the trait significantly better than the parametric model with the main effect of SNP19_1. Our results suggest that RPM is a good alternative to model choices that can find associations of the interaction effects of multiple SNPs for quantitative traits in livestock species.