• Journal of Korea Water Resources Association
• /
• v.38 no.1
• /
• pp.59-71
• /
• 2005

Mountain watersheds are a lot of problems about soil erosion because of frequent wildfire occurrence. Runoff and soil erosion caused by the rain on a hillslope after wildfire are dependent on cover factor. And these has been a decrease by the cover factor recovery following time passage. The present paper defines the dynamic sensitivity of runoff and soil erosion that is the rate of runoff volume and soil erosion weight to rainfall energy and analyzes characteristics of the sensitivity for variation of cover factor, In according to the correlation analysis between other parameters and sensitivities, the sensitivity is the most dependent on the cover factor and the relation is exponential. The sensitivities after wildfire have suitable relation with treatment method for the mitigation of burnt forest and wildfire intensity. It was confirmed that the variation of soil erosion sensitivities come upon the range of stability in 5 years after wildfire.

• Nuclear Engineering and Technology
• /
• v.18 no.2
• /
• pp.78-84
• /
• 1986

An equation of material number density sensitivity coefficient is derived using first-order perturbation theory. The beginning of cycle of Super-Phenix I is taken as the reference system for this study. Effective multiplication factor of the reference system is defined as system response function and fuel enrichment and fuel effective density are chosen for the variation of reference input data since they are described by material number density which is a component of Boltzmann operator. The nuclear computational code system (KAERI-26 group cross section library/1DX/2DB/PERT-V) is employed for this calculation. Sensitivity coefficient of fuel enrichment on effective multiplication factor is 4.576 and sensitivity coefficient of effective fuel density on effective multiplication factor is 0.0756. This work shows that sensitivity methodology is lesser timeconsuming and gives more informations on important design parameters in comparison with the direct iterative calulation through large computer codes.

• Journal of Korean Society on Water Environment
• /
• v.35 no.2
• /
• pp.152-164
• /
• 2019

In this study, a Benthic Macroinvertebrates Family Index (BMFI) was developed using 100 indicator groups (99 families including Chironomidae with 2 phena). Families were assigned a score between 1 and 10 depending on their sensitivity to organic pollution. The BMFI was composed of the sensitivity and relative abundance of the indicator taxa. Sensitivity values of each group were generally similar to Biological Monitoring Working Party (BMWP) scores or Walley, Hawkes, Paisley, Trigg (WHPT) scores of UK, Japanese BMWP scores, and the FBI tolerance values of North America. However, sensitivity values of some taxa were significantly different from those of foreign countries, which seemed to have resulted from discrepancy in species composition, difference of taxonomic classification system, or methodological difference for estimation of sensitivity. As an annual average level, BMFI showed significant correlation with concentration of 5-day biochemical oxygen demand (BOD5) (correlation coefficient r = -0.80, n = 569 sites), total suspended solids (r = -0.68), and total phosphorus (r = -0.79). In addition, BMFI revealed strong correlation with Shannon-Weaver's species diversity (r = 0.85), Margalef's species richness (r = 0.85) and McNaughton's dominance (r = -0.84). Correlation between BMFI and water quality parameters or community indices such as species diversity did not show significant difference compared to that of species-level indices such as BMI (Benthic Macroinvertebrates Index). This means that BMFI is a more useful indicator in terms of easy identification of organisms. BMFI was used to assess the environmental status of 3,017 sites of Stream Ecosystem Survey conducted by the Korean Ministry of Environment between 2016 and 2018. As a result, about half of all sites appeared to be in good condition, and a quarter in poor condition.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.157-162
• /
• 2023

A highly sensitive refractive index bio-sensor based on grating-assisted strip directional coupler (GASDC) is proposed. The sensor is designed using two asymmetric strip waveguides with a top-loaded grating structure in one of the waveguides. Maximum light couples from one waveguide to the other at the resonance wavelength satisfying phase-matching condition (PMC), and it shows that the change in phase-matching condition with the change in refractive index of the analyte medium in the cover region can be used as a measure of the sensitivity. The proposed sensor will be an on-chip device with a high refractive index sensitivity, and the sensor configuration offers a low propagation loss, thereby enhancing the sensitivity. Furthermore, variation of the sensitivity with the waveguide parameters of sensor is evaluated to optimize the design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.1-9
• /
• 2015

This paper presents a design method for optimizing the focused beam characteristics, which are mainly determined by the condenser lenses in a scanning electron microscopy (SEM) design. Sharply reducing the probe diameter of electron beams by focusing the condenser lens (i.e., the rate of condensation) is important because a small probe diameter results in high-performance demagnification. This study explored design parameters that contribute to increasing the SEM resolution efficiently using lens analysis and the ray tracing method. A sensitivity analysis was conducted based on those results to compare the effects of these parameters on beam focusing. The results of this analysis on the design parameters for the beam characteristics can be employed as basic key information for designing a column in SEM.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.5
• /
• pp.1813-1816
• /
• 2015

Background: The aim of this study was to research the importance of the neutrophil to lymphocyte ratio (NLR) in prediction of PSA recurrence after radical prostatectomy, which has not been reported so far. Materials and Methods: The data of 175 patients who were diagnosed with localised prostate cancer and underwent retropubic radical prostatectomy was retrospectively examined. Patient pre-operative hemogram parameters of neutrophil count, lymphocyte count and NLR were assessed. The patients whose PSAs were too low to measure after radical prostatectomy in their follow-ups, and then had PSAs of 0,2 ng/mL were considered as patients with PSA recurrence. Patients with recurrence made up Group A and patients without recurrence made up Group B. Results: In terms of the power of NLR value in distinguishing recurrence, the area under OCC was statistically significant (p<0.001) .The value of 2.494 for NLR was found to be a cut-off value which can be used in order to distinguish recurrence according to Youden index. According to this, patients with a higher NLR value than 2.494 had higher rates of PSA recurrence with 89.7% sensitivity and 92.6% specificity. Conclusions: There are certain parameters used in order to predict recurrence with today's literature data.We think that because NLR is easy to use in clinics and inexpensive, and also has high sensitivity and specificity values, it has the potential to be one of the parameters used in order to predict biochemical recurrence in future.

• Journal of Applied Reliability
• /
• v.18 no.3
• /
• pp.201-207
• /
• 2018

Purpose: To develop the reliability growth planning for a subsystem of guided weapon system using PM2-Continuous model. Methods: The target MTBF of the subsystem is set by allocating the system target MTBF to the lower level, where ARINC method is applied. Other model parameters such as initial MTBF, management strategy ratio and average fix effectiveness factor are chosen from historical growth parameter estimates. Given the values of model parameters, the reliability growth planning curve using PM2-Continuous model is constructed and the sensitivity analyses are performed for the changes of model parameters. Results: We have developed the reliability growth plan for a subsystem of guided weapon system using PM2-Continuous model. It was found that the smaller the ratio of initial MTBF to target MTBF, the smaller the management strategy ratio, the smaller the average fix effectiveness factor, and the shorter the development test period, the higher reliability growth is required. Conclusion: The result of this study will be used as a basis for establishing the reliability growth plan, the test period setting and the budget appropriation for the similar system entering the system development stage in the future.

• Journal of Korea Water Resources Association
• /
• v.38 no.9 s.158
• /
• pp.699-711
• /
• 2005

In this study, the U.S. Geological Survey's DR3M-II(Distributed Routing Rainfall-Runoff Model) was applied for small urban drainage. DR3M-II is a watershed model for routing storm runoff through a branched system of pipes and natural channels using rainfall input. The model was calibrated and verified using short term rainfall-runoff data collected from Sanbon basin. Also, the parameters were optimized using Rosenbrock technic. An estimated simulation error for peak discharge was about 7.4 percent and the result was quite acceptable. Results of the sensitivity analysis indicate that the percent of effective impervious area and ${\alpha}$ defining surface slope and roughness were the most sensitive variables affecting runoff volumes and peak discharge for low and high intensity storm respectively. In most cases, soil moisture accounting and infiltration parameters are the variables that give more effects to runoff volumes than peak discharge. Parameter ${\alpha}$ showed the opposite result.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1626-1637
• /
• 2020

This work covers an important point of the benchmark released by the expert group on Uncertainty Analysis in Modeling of Light Water Reactors. This ambitious benchmark aims to determine the uncertainty in light water reactors systems and processes in all stages of calculation, with emphasis on multi-physics (coupled) and multi-scale simulations. The Gesellschaft für Anlagen und Reaktorsicherheit methodology is used to propagate the thermal-hydraulic uncertainty of macroscopic parameters through TRACE5.0p3/PARCSv3.0 coupled code. The main innovative points achieved in this work are i) a new thermal-hydraulic model is developed with a highly-accurate 3D core discretization plus an iterative process is presented to adjust the 3D bypass flow, ii) a control rod insertion occurrence -which data is obtained from a real PWR test- is used as a transient simulation, iii) two approaches are used for the propagation process: maximum response where the uncertainty and sensitivity analysis is performed for the maximum absolute response and index dependent where the uncertainty and sensitivity analysis is performed at each time step, and iv) RESTING MATLAB code is developed to automate the model generation process and, then, propagate the thermal-hydraulic uncertainty. The input uncertainty information is found in related literature or, if not found, defined based on expert judgment. This paper, first, presents the Gesellschaft für Anlagen und Reaktorsicherheit methodology to propagate the uncertainty in thermal-hydraulic macroscopic parameters and, then, shows the results when the methodology is applied to a PWR reactor.

• Journal of Environmental Science International
• /
• v.20 no.9
• /
• pp.1151-1163
• /
• 2011

The bed change analysis near the opening gate of a dam or weir to release deposited sediments have been conducted mostly using the numerical models. However, the use of unverified input parameters in the numerical model is able to produce the different results with natural and real conditions. Also, the bed changes near the opening gate of a dam or weir calculated with a numerical model could be varied depending on the geometry extent included the downstream area with supercritical flow in the model. In addition, the different time steps could provide different results in the bed change calculation, even though other conditions such as input parameters, geometries, and total simulation time were same. Therefore, in this study, hydraulic experiments were performed to validate the eddy viscosity coefficient which is the one of important input parameters in the RMA2 model and relevant to variation of simulation results. The bed changes were calculated using the SED2D model based on flow results calculated in the RMA2 model with the verified and selected eddy viscosity coefficient and also compared with experimental results. The bed changes near the opening gate were underestimated in the numerical model comparing with experimental results except only the numerical case without the modeling section of sediment release pipe and downstream area where the supercritical flow was produced. For the simulation of minimum time steps, different shapes of scour hole were produced in numerical and physical modeling.