• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.179-183
• /
• 1989

This study presents a methodology to choose the optimal parameter of controller by using the performance index sensitivity. The pro-posed method is to select the controller parameter to have the minimum sensitivity. It is shown that the optimal parameter proves the effectiveness in the dynamic stability of power system.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.240-247
• /
• 2009

The purpose of this study is to develop a method to evaluate solubility parameter interactions of cosmetic ingredients in formulations. This experimentation relates to the fabrication of new multi-layer cleansing oil which can remove make-up products such as lipstick, foundation, mascara, eye shadow, etc., and also can wash away dirt and sebum from the skin just in one stage process. Solubility parameter and specific gravity of various cosmetic ingredients are measured to explain the cleanliness of interface, detergency of make-up cosmetics on the skin surface. The results suggest that it is possible for cosmetic chemists to use solubility parameter of cosmetic materials for fabrication of new formulation of 3-layer cleansing oil.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권10호
• /
• pp.464-472
• /
• 2001

This study uses distributed parameter systems as the spatial discretization technique, modelling in lumped parameter systems, and applies fast WALSH transform and the Picard's iteration method to high order partial differential equations and matrix partial differential equations. This thesis presents a new algorithm which usefully exercises the optimal control in the distributed parameter systems. In exercising optimal control of distributed parameter systems, excellent consequences are found without using the existing decentralized control or hierarchical control method. This study will help apply to linear time-varying systems and non-linear systems. Further research on algorithm will be required to solve the problems of convergence in case of numerous applicable intervals.

• 천문학회지
• /
• 제42권2호
• /
• pp.27-32
• /
• 2009

Recently, we suggested a CME earthward direction parameter as an important geoeffective parameter that has been demonstrated by front-side halo CME data. In this study, we present the geometrical implication of this parameter by comparing with the parameters from a CME cone model. Major results from this study can be summarized as follows. First, we derive an analytic relationship between the cone model parameters(the half angular width of a cone and the angle between the cone axis and the plane of sky) and the earthward direction parameter. Second, we demonstrate a close relationship between the earthward direction parameter and the cone axis angle using 32 front-side full halo CMEs. Third, we found that there is noticeable inconsistency between the cone axis angles estimated from the cone model fitting to the CMEs and from their associated flare positions, implying that the flare position should not be considered as a good earthward direction parameter. Finally we present several advantages of our earthward direction parameter in terms of the forecast of a geomagnetic storm based on CME parameters.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.141-149
• /
• 1999

At present time, industrial accidents statistics are used as the basic data of the policy to prevent industrial accidents and the plan to applicate the industrial accident insurance. But this statistical data is not sufficient for the effective safety management because it is the expression of the itemized distribution and the frequency for the whole cases. This study tried to correlational analysis for each causes by defining investigational items as their accident parameters. The correlational analysis, between the unsafe action and status and their relational causes, was performed to analyze the occurrence causes of industrial accident. And to assume the severity of accident, the correlativity and independency between causes and direct causes which are defined hospital days subordinate parameter were analyzed. In addition, this study expressed numerically the effectiveness of subordinate parameters depended on the level of independent parameter by presenting the predictive model between dependent parameter and independent parameter, which have the categorical parameter, through the Logit analysis method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1091-1094
• /
• 2005

This paper formulates the parameter estimation of cornering behavior of a vehicle. Especially some vehicle parameter is very important on stability control of chassis by ECU, but some parameter is so hard to get by sensor which parameter is included the nonlinear characteristic of tire cornering force. So we need to deduce that parameter from used signal and numerical method. In this study, we propose a estimation method and present the simulation by parameter estimation technique.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권3호
• /
• pp.62-67
• /
• 2003

The grinding force generated during the grinding process causes an elastic deformation of the workpiece, grinding wheel, and machine system. Thus, the true depth of cut is always smaller than the apparent depth of cut. This is known as machining elasticity phenomenon. The machining elasticity parameter is defined as a ratio between the true depth of cut and the apparent depth of cut. It is an important factor to understand the material removal mechanism of the grinding process. To increase productivity, the value of this machining elasticity parameter must be large. Therefore, it is essential to know the characteristics of this parameter. The objective of this research is to study the effect of the major grinding conditions, such as table speed, depth of cut, on this parameter experimentally, Through this research, it is found that this parameter value is increasing when the table speed is decreasing or the depth of cut is increasing. Also, this parameter value depends on the grinding mode (up grinding, down grinding).

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제8권2호
• /
• pp.51-73
• /
• 2004

A boundary layer analysis is used to study the effects of Hall and ion-slip currents on the steady magneto-micropolar of a viscous incompressible and electrically conducting fluid over a horizontal plate. By means of similarity solutions, deviation of fundamental equations on the assumption of small magnetic Reynolds number are solved numerically by using the shooting method. The effects of various parameters of the problem, e.g. the magnetic parameter, Hall parameter, ion-slip parameter, buoyancy parameter and material parameter are discussed and shown graphically.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.2215-2219
• /
• 2009

For model calibration in rainfall-runoff modeling, streamflow data at a specific outlet is obviously required but is not sufficient to identify parameters of a model since numerous parameter combinations can result in very similar model performance measures (i.e. objective functions) and indistinguishable simulated hydrographs. This phenomenon has been called 'equifinality' due to inherent parameter uncertainty involved in rainfall-runoff modeling. This study aims to investigate catchment responses in time and space to various uncertain parameter sets in distributed rainfall-runoff modeling. Seven plausible (or behavioral) parameter sets, which guarantee identically-good model performances, were sampled using deterministic and stochastic optimization methods entitled SCE and SCEM, respectively. Then, we applied them to a computational tracer method linked with a distributed rainfall-runoff model in order to trace and visualize potential origins of streamflow at a catchment outlet. The results showed that all hydrograph simulations based on the plausible parameter sets were performed equally well while internal catchment responses to them showed totally different aspects; different parameter values led to different distributions with respect to the streamflow origins in space and time despite identical simulated hydrographs. Additional information provided by the computational tracer method may be utilized as a complementary constraint for filtering out non-physical parameter set(s) (or reducing parameter uncertainty) in distributed rainfall-runoff modeling.

• 조명전기설비학회논문지
• /
• 제15권6호
• /
• pp.73-81
• /
• 2001

분포정수계는 시스템이 두 개 이상의 독립변수로 표현되면서 또한 각 변수에 대한 미분을 포함하는 편미분 방정식으로 표현되므로, 분포정수계에 직접적인 최적제어 논리를 도입하는 것은 매우 어렵다. 본 연구에서 제시하고자하는 새로운 알고리즘은 월쉬 함수 고유특성을 그대로 유지할 수 있는 유한급수전개방법을 이용함과 동시에 계산의 편리성을 위하여 고속 월쉬 변환을 사용하는 것으로서, 본 연구 방법을 사용하면 역행렬 연산이 필요 없게 되므로 기존의 방법에 의해 처리하기 힘든 분포정수계, 선형시변계, 비선형계의 해석 및 제어문제어도 쉽게 적용할 수 있다.