• Communications for Statistical Applications and Methods
• /
• 제3권2호
• /
• pp.103-117
• /
• 1996

In the Taguchi Parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined- array approach, was suggested by welch et. al. (1990) and studied by Vining and Myers(1990), Box and Jones (1992) and others. In these studies, only single response variable was considered. We propose how to simultaneously optimize multiple responses when there are correlations among responses, and when we use the combined-array approach to assign control and noise factors.

• 품질경영학회지
• /
• 제27권1호
• /
• pp.165-194
• /
• 1999

Taguchi's parameter design seeks proper choice of levels of controllable factors (Parameters in Taguchi's terminology) that makes the qualify characteristic of a product optimal while making its variability small. This aim can be achieved by response surface techniques that allow flexibility in modeling and analysis. In this article, a collection of response surface modeling and analysis techniques is proposed to deal with the multiresponse optimization problem in experimentation with Taguchi's signal and noise factors.

• 조명전기설비학회논문지
• /
• 제21권9호
• /
• pp.64-75
• /
• 2007

Photovoltaic systems utilize the infinite clean energy of the sun, without creating any air pollution or noise and mechanical vibration. A PV system operates without the need of fuel, rotation surfaces, high temperatures or high pressures. It is therefore to do maintain and simple to install as well as having a long life cycle. The global market for PV systems continues to grow rapidly by 30[%] per year. This paper suggests a new design method for the PV system installation that will allow to the improvement of system efficiency. This method is in accordance with the loss parameter compensation method designed for the PV systems and investigated through simulation and practical experimentation. It was applied to an interconnected 10[kW] grid PV system and was demonstrated in the field. Features such as solar array, PCS, system efficiency, performance and stability were considered. Through the proposed optimal parameter design method, the features of the system were studied, and the 10[kW] PV system was demonstrated and analyzed.

• 한국정보통신학회논문지
• /
• 제6권4호
• /
• pp.589-594
• /
• 2002

Hairpin 형태의 필터는 크기를 작게 설계할 수 있지만 설계방법이 복잡하다는 단절이 있다. 본 논문에서는 기존의 전송선로 이론과 J 인버터 회로를 이용하여 Hairpin Line 필터 설계에 새롭게 적용하였으며, 설계하는데 필요한 J 와 b 파라미터를 정확히 구하는 방법을 제시하고 있다. 인접하는 소자간의 상호 결합이 없는 부분을 고려하였으며, 각 단에서의 결합성분에 대한 전기적인 결합선로 길이를 J 와 b 파라미터로부터 구할 수 있다. 제시하고 있는 설계방법으로 Serenade 8.0을 이용하여 중심 주파수 2.6GHz에서 동작하는 소형의 Hairpin Line 대역 통과 필터를 설계하고 컴퓨터 시뮬레이션을 통하여 특성을 확인하였다.

• Journal of Welding and Joining
• /
• 제20권2호
• /
• pp.102-108
• /
• 2002

Resistance spot welding of aluminum alloys is based upon Joule heating of the components by passing a large current in a short duration. Since aluminum alloys have the potential to replace steels fur automobile body assemblies, it is important to study the process robustness of aluminum spot welding process. In order to evaluate the effects of process parameters on the weld quality, major process variables and abnormal process conditions were selected and analyzed. A newly developed two-stage, sliding-level experiment was adopted fur effective parameter design and analysis. Suitable ranges of welding current and button diameters were obtained through the experiment. The effects of the factors and their levels on the variation of acceptable welding current were considered in terms of main effects. From the results, it is concluded that any abnormal process condition decreases the suitable current range in the weld lobe curve. Pareto analysis of variance was also introduced to estimate the significant factors on the signal-to-noise (S/N) ratio. Among the six factors studied, fit-up condition is found to be the most significant factor influencing the SM ratio. Using a Pareto diagram, the optimal condition is determined and the SM ratio is significantly improved using the optimal condition.

• International Journal of Control, Automation, and Systems
• /
• 제4권4호
• /
• pp.448-455
• /
• 2006

This paper deals with the observer design problem for a class of state-delayed nonlinear systems with or without time-varying norm-bounded parameter uncertainty. The nonlinearities under consideration are assumed to satisfy the global Lipschitz conditions and appear in both the state and measured output equations. The problem we address is the design of a nonlinear observer such that the resulting error system is globally asymptotically stable. For the case when there is no parameter uncertainty, a sufficient condition for the solvability of this problem is derived in terms of linear matrix inequalities and the explicit formula of a desired observer is given. Based on this, the robust observer design problem for the case when parameter uncertainties appear is considered and the solvability condition is also given. Both of the solvability conditions obtained in this paper are delay-dependent. A numerical example is provided to demonstrate the applicability of the proposed approach.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.862-870
• /
• 2010

This thesis has been researched on optimized design method for the total cross section of embankment considering the fact that the size of embankment cross section is directly related with economic efficiency when dam designing. In general, embankment cross section of fill dam is either determined by cohesion and angle of internal friction, a strength parameter of embankment materials or by permeability of embankment. Therefore the size of embankment cross section depending on strength parameter of embankment materials was determined by using MIDAS-GTS program through stress-seepage coupled analysis at the time of fill dam design. As a result, determination of embankment cross section was more affected by the size of central core and permeability rather than by slope stability by shear strength and it was revealed that in case of embankment height being over 20m, stability against infiltration and slope action could be secured only when embankment slope is at least over 1:2.5. In addition, it was also revealed that in case of making the size of central core exceeding specification standard, total cross section of embankment could be reduced considerably and at the time of embankment design, adequate size and appropriateness of embankment cross section could be determined with referring the table suggested by this study.

• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.913-921
• /
• 2009

본 연구에서는 강인한 성능을 가지는 해집단내에서 기준모델의 출력을 최적으로 추종하도록 유전 알고리즘을 사용하여 가중치 함수와 설계 파라메타 ${\gamma}$를 동시에 최적화함으로써, 강인한 성능에 관한 필요충분조건식을 만족함은 물론 설계사양에 따른 만족스러운 응답특성을 보이는 강인한 성능을 가지는 모델추종형 $H_{\infty}$ 제어기의 설계법을 제시하고 시뮬레이션을 통하여 그 유용성을 확인한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.437-444
• /
• 2015

In simulation-based circuit optimization, many simulation runs may be wasted while evaluating infeasible designs, i.e. the designs that do not meet the constraints. To avoid such a waste, this paper investigates the use of support vector machine (SVM) classifiers in predicting the design's feasibility prior to simulation and the optimal selection of the SVM parameters, namely, the Gaussian kernel shape parameter ${\gamma}$ and the misclassification penalty parameter C. These parameters affect the complexity as well as the accuracy of the model that SVM represents. For instance, the higher ${\gamma}$ is good for detailed modeling and the higher C is good for rejecting noise in the training set. However, our empirical study shows that a low ${\gamma}$ value is preferable due to the high spatial correlation among the circuit design candidates while C has negligible impacts due to the smooth and clean constraint boundaries of most circuit designs. The experimental results with an LC-tank oscillator example show that an optimal selection of these parameters can improve the prediction accuracy from 80 to 98% and model complexity by $10{\times}$.

• 전자공학회논문지D
• /
• 제36D권12호
• /
• pp.63-69
• /
• 1999

QWS-DFB 레이저에서 단일 주파수 동작 안정성을 결정하는 문턱 이득 차이와 축 방향 광자 분포, 균일성을 동시에 나타내는 통합된 설계 변수로서 광자 분포 중심을 정의하고, 이 광자 분포 중심이 문턱 이득 차이와 광자 분포의 균일성과 어떻게 연관되는지를 유효 굴절률 전달 매트릭스 방법으로 보였다. 또, 이로부터 단일 주파수 동작 안정성을 최대화하는 설계 원칙을 제시하였다. 그리고 이 설계 원칙을 적용한 예로서 100% 단일 주파수 동작 수율을 보이는 결합계수의 범위를 넓힌 ,sampled grating QWS-DFB 레이저 구조를 제안하였다. 이 레이저 구조는 단일 주파수 동작을 하는 결합계수의 범위가 좁다는 QWS-DFB 레이저의 문제점을 해결하는 길을 제시하였다.