• 항공우주기술
• /
• 제2권1호
• /
• pp.89-95
• /
• 2003

본 연구에서는 전력 컨버터를 병렬 사용하는 여러 가지 모듈화 방법과 전류제어 방법, 컨버터를 병렬 사용할 경우 발생하는 모듈 간 전류 불균형(current unbalance)의 원인과 해결 방법에 대해서 알아보며, 각각의 모듈화 방법의 장단점과 전류 제어방법의 특성을 해석한다. 기존의 모듈화 및 전류 제어방법에서 unregulated bus 방식을 사용하는 위성의 solar power regulator용 컨버터의 모듈화에 적용 가능한 응용 방법을 검토한다. 마지막으로 적용 가능한 응용방법을 2-병렬 모듈 컨버터에 적용하여 시뮬레이션과 prototype 제작을 통한 실험으로 적용 가능성을 확인한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.546-549
• /
• 1996

The use of Solid-State switches as interruption devices offers signigicant advantages in circuit breaker applications. In this paper, we introduce a GTO DC circuit breaker using GTOs and ZnO varistors. And also, the result of the research work described in this paper allows to establish the rules for paralleling of GTO's.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권4호
• /
• pp.154-160
• /
• 2003

The switched reluctance motor(SRM) has a considerable potential for industrial applications because of its high reliability as a result of the absence of rotor windings. In some applications with SRM, a parallel switching strategy is often used for cost saving, increasing of current capacity and system reliability. This paper proposes a new parallel switching strategy of SRM using parallel winding. While conventional parallel switching devices are connected in a phase winding, power devices are connected in the parallel windings wound in each pole of stator in the proposed method. Paralleling strategy for current sharing in the proposed method can be easily determined without considerations of any nonlinear characteristics of power devices such as conduction resistance, threshold voltage and gain factor. The proposed paralleling strategy is verified by the mathematical analysis and experimental results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.449-452
• /
• 2009

Optimized controller design for converters are very important because control-loop characteristics of converters determine the dynamic performances of converters. In addition, verification process of the control-loop characteristics by simulation and measurement with real hardware is sure to be performed after all parameters for controller and main power-stage are fixed. In this paper, general process for designing outer-loop controller of paralleling step-down converter is described. Simulation results are also contained for verifying validity of controller design results. Finally, voltage control-loop measurement method is explained and results are compared with simulation outputs.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.154-154
• /
• 2003

The switched reluctance motor(SRM) has a considerable potential for industrial applications because of its high reliability as a result of the absence of rotor windings. In some applications with SRM, a parallel switching strategy is often used for cost saving, increasing of current capacity and system reliability. This paper proposes a new parallel switching strategy of SRM using parallel winding. While conventional parallel switching devices are connected in a phase winding, power devices are connected in the parallel windings wound in each pole of stator in the proposed method. Paralleling strategy for current sharing in the proposed method can be easily determined without considerations of any nonlinear characteristics of power devices such as conduction resistance, threshold voltage and gain factor. The proposed paralleling strategy is verified by the mathematical analysis and experimental results.

• 조명전기설비학회논문지
• /
• 제26권3호
• /
• pp.73-79
• /
• 2012

A counterpoise is commonly employed in grounding systems installing near the ground surface of low resistivity soils and radial-type counterpoises are used in the limited space. Recently some studies on the evaluation of ground impedance of paralleling ground electrodes have carried out, but the data for providing the frequency-dependent ground impedances considering potential interferences are not yet sufficient. In order to provide the information about the design of grounding systems for surge protection, the simulations of the frequency-dependent ground impedance of various shaped counterpoises are carried out by using the distributed parameter circuit model including the effect of potential interferences. This paper presents the theoretical simulations and actual experiments of the frequency-dependent ground impedance of paralleling and 3 or 4-arms star counterpoises. The accuracy of the simulation methodology is examined by the comparison with the measured results, and the results show a good agreement between the simulation and the experiment.

• 치과방사선
• /
• 제16권1호
• /
• pp.103-112
• /
• 1986

75명의 치과대학 4학년생들이 촬영한 300예의 구내전악표준방사선사진들을 촬영법과 필름의 유지법에 다라 필름을 피촬영자의 엄지나 검지로 유지하고 등각법으로 촬용한 경우 (Ⅰ군), 필름을 Rinn Sanp-A-Ray 기구로 유지하고 등각법으로 촬영한 경우 (Ⅱ군), 필름을 Rinn XCP기구로 유지하고 Short cone에서 평행법으로 촬영한 경우(Ⅲ군), 필름을 Rinn XCP기구로 유지하고 Long cone에서 평행법으로 촬영한 경우(Ⅳ군)으로 분류하여 75예의 구내전악표준방사선사진으로 구성된 각 군의 재촬영을 조사하여 각 군에서 가장 많이 나타난 실책의 종류와 부위, 그리고 구내전악표준방사선사진 1회당 평균재촬영매수에 대해 아래의 결과를 얻었다. Ⅰ군 : Incorrect film placement(47.8%)와 상악 견치부(26.9%)였으며 0.89매였다. Ⅱ군 : Incorrect film placement(44.0%)와 상악 대구치부(28.6%)였으며 1.12매였다. Ⅲ군 : Incorrect film placement(79.1%)와 상악 대구치부(32.0%)였으며 2.05매였다. Ⅳrns : Incorrect film placement(67.7%)와 상악 대구치부(30.7%)였으며 1.69매였다. 평균재촬영매수에서는 같은 촬영법인 Ⅰ군과 Ⅱ군간에서와, Ⅲ군과 Ⅳ군간에서는 유의한 차가 나타나지 않았으나 (P>0.05), 등각촬영법의 군 (Ⅰ＋Ⅱ)보다 평행촬영법의 군(Ⅲ＋Ⅳ)에서 0.86매 많았다 (P<0.01)

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2005년도 추계학술대회
• /
• pp.85-93
• /
• 2005

Tweedie (1957a) proposed a method for the analysis of residuals from an inverse Gaussian population paralleling the analysis of variance in normal theory. He called it the analysis of reciprocals. In this paper, we propose a Bayesian model selection procedure based on the fractional Bayes factor for the analysis of reciprocals. Using the proposed model procedures, we compare with the classical tests.

• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.1167-1176
• /
• 2005

Tweedie (1957a) proposed a method for the analysis of residuals from an inverse Gaussian population paralleling the analysis of variance in normal theory. He called it the analysis of reciprocals. In this paper, we propose a Bayesian model selection procedure based on the fractional Bayes factor for the analysis of reciprocals. Using the proposed model selection procedures, we compare with the classical tests.

• Journal of information and communication convergence engineering
• /
• 제9권4호
• /
• pp.424-427
• /
• 2011

The paper is devoted to problem of spline approximation. A new method of nodes location for curves and surfaces computer construction by means of B-splines, of Reyabenko's splines and results of simulink-modeling is presented. The advantages of this paper is that we comprise the basic spline with classical polynomials both on accuracy, as well as degree of paralleling calculations are also show's.