• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.87-90
• /
• 1991

In the field of structural analysis so-called substructure methods have been applied extensively to solve large and complex structures by splitting them up in substructures. This substructure method is applicable to electromagnetic field analysis and highly parallel in nature. In this paper substructure FEM is implemented for magnetostatic field computation using parallel computer consists of many transputers. Parallel substructure method is a promising tool as a solution of not only compuation speed problem but also memory problem.

• Structural Engineering and Mechanics
• /
• v.77 no.3
• /
• pp.369-381
• /
• 2021

The seismic responses of elevated tanks considering liquid-structure interaction are presented under horizontal earthquake. The scaled model tank is fabricated to study the dynamic responses of anchored tank and newly designed uplift tank with replaced dampers. The natural frequencies for structural mode are obtained by modal analysis. The dynamic responses of tanks are completed by finite element method, which are compared with the results from experiment. The displacement parallel and perpendicular to the excitation direction are both gained as well as structural acceleration. The strain of tank walls and the axial strain of columns are also obtained afterwards. The seismic responses of liquid storage tank can be calculated by the finite element model effectively and the results match well with the one measured by experiment. The aim is to provide a new type of tank system with vertical constraint relaxed which leads to lower stress level. With the liquid volume increasing, the structural fundamental frequency has a great reduction and the one of uplift tank are even smaller. Compared with anchored tank, the displacement of uplift tank is magnified, the strain for tank walls and columns parallel to excitation direction reduces obviously, while the one perpendicular to earthquake direction increases a lot, but the values are still small. The stress level of new tank seems to be more even due to uplift effect. The new type of tank can realize recoverable function by replacing dampers after earthquake.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.660-663
• /
• 2011

폭발하중은 매우 짧은 시간 내에 순간적인 높은 압력으로 발생된다. 따라서 폭발하중을 받는 구조물은 매우 복잡한 순간 동역학적 손상 거동을 나타낸다. 이러한 외부 하중에 대한 실험적 연구는 큰 비용, 시설, 그리고 군사적 보안 문제가 요구되기 때문에, 고성능 컴퓨팅 기술을 이용한 수치적 기법을 통해 구조물의 동적 비선형 해석을 수행하였다. 수치해석의 정확성을 높이기 위해 폭풍파와 같은 대기전파의 경우 Euler 기법, 콘크리트 재료의 경우 Lagrange 기법을 적용한 복합적 수치해석 (multi-solver coupling) 기법이 적용되었다. 제안된 수치해석 기법은 explicit 유한요소해석 프로그램인 AUTODYN을 이용하여 수행되었다. 그리고 클러스터 (cluster) 내 병렬 알고리즘 (parallel algorithm)을 이용하여 수치해석의 효율성을 높였다. RC 구조물의 수치해석 결과, 기존 실험 결과와 비교하여 잘 일치되었다. 또한 영역분할 개수가 증가할수록 수행시간은 감소되었고 Speed-up과 효율성은 높아졌다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.4
• /
• pp.365-373
• /
• 2011

Damage of reinforced concrete panel subjected to blast load using parallel and domain decomposition is analyzed. The numerical results are sensitive to the mesh size because blast waves are generated during the extremely short term. In order to investigate the effect of mesh size on the blast wave, the analysis results from various wave mesh size using AUTODYN, the explicit finite element analysis program, were compared with existing experimental results. The smaller mesh size was, the higher accuracy was. However, in this case, the analysis was inefficient. Therefore, in order to increase numerical efficiency, the parallel analysis using decomposed method based on Euler and Lagrangian description was performed. Finally, the decomposed method using both the structure domain based on Lagrange description and the blast wave domain based on Euler description was more efficient than the decomposed method using only the Lagrange mesh on structure domain.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.973-982
• /
• 2007

In this paper, optimal design framework is developed by automatic mesh generation and PSO(Particle Swarm Optimization) algorithm based on parallel computing environment and applied to structural optimal design of satellite adapter module. By applying automatic mesh generation, it became possible to change the structural shape of adapter module. PSO algorithm was merged with parallel computing environment and for maximizing a computing performance, asynchronous PSO algorithm was developed and could reduce the computing time of optimization process. As constraint conditions, eigen-frequency and maximum stress was considered. Finally using optimal design framework, weight reduction of satellite adapter module is derived with satisfaction of structural safety.

• KDI Journal of Economic Policy
• /
• v.36 no.4
• /
• pp.71-102
• /
• 2014

This paper examines the possibility of 'parallel reimportation', the reimportation of goods originally produced in the country and exported to another country by profit-pursuing arbitrageurs. The chance of parallel reimportation implies unusually high level of market power of domestic enterprises, and promoting parallel reimportation can be an effective welfare-enhancing, competition-generating policy for the situation. Motivated by the finding, this paper proposes a methodology to measure the welfare effects of parallel reimportation. Specifically, this paper makes use of a structural empirical model to estimate the demand and supply system of Korean automobile market for performing a counterfactual experiment to measure the welfare effects of the parallel reimportation. The results indicates that parallel reimportation can enhance social welfare considerably by increasing consumer surplus and government tax revenue altogether, though it reduces the producer surplus.

• Geomechanics and Engineering
• /
• v.22 no.1
• /
• pp.97-108
• /
• 2020

The time-consuming and less objectivity are the main problems of conventional micromechanical parameters calibration method of Particle Flow Code simulations. Thus this study aims to address these two limitation of the conventional "trial-and-error" method. A new calibration method for the linear parallel bond model (CM-LPBM) is proposed. First, numerical simulations are conducted based on the results of the uniaxial compression tests on limestone. The macroscopic response of the numerical model agrees well with the results of the uniaxial compression tests. To reduce the number of the independent micromechanical parameters, numerical simulations are then carried out. Based on the results of the orthogonal experiments and the multi-factor variance analysis, main micromechanical parameters affecting the macro parameters of rocks are proposed. The macro-micro parameter functions are ultimately established using multiple linear regression, and the iteration correction formulas of the micromechanical parameters are obtained. To further verify the validity of the proposed method, a case study is carried out. The error between the macro mechanical response and the numerical results is less than 5%. Hence the calibration method, i.e., the CM-LPBM, is reliable for obtaining the micromechanical parameters quickly and accurately, providing reference for the calibration of micromechanical parameters.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.8
• /
• pp.878-885
• /
• 2011

A kinematically-hybrid 5-axis machine tool is analyzed from the perspective of machine tool design. Its kinematic characteristics are pointed out, which should be considered during the conceptual design process. A result of the structural analysis of the machine is presented, which is performed during the detailed design process. It is also presented how we improve the thermal characteristics of the machine tool by changing the installation position of the actuators.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.287-298
• /
• 2001

Analysis of nonlinear behavior of prestressed concrete frame structures on PC is a time-consuming computing job if the problem size increase to a certain degree. Cluster system has emerged as one of promising computing environments due to its good extendibility, portability, and cost-effectiveness, comparing it with high-end work-stations or servers. In this paper, a parallel nonlinear analysis procedure of prestressed concrete frame structure is presented using cluster computing. Cluster system is configured with readily available pentium III class PCs under Win98 or Linux and fast ethernet. Parallel computing algorithms on element-wise processing parts including the calculation of stiffness matrix, element stresses and determination of material states, check of material failure and calculation of unbalanced loads are developed using MPL. Validity of the method is discussed through typical numerical examples. For the case of 4 node system, maximum speedup is 3.15 and 3.74 for Win98 and Linux, respectively. Important issues for the efficient use of cluster computing system based un PCs and ethernet are addressed.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.10a
• /
• pp.1-8
• /
• 2000

In this work, Internet Supercomputing methodology is introduced and the concept is materialized for large-scale finite element analysis. The primary resources of Internet Supercomputing are numerous idling PCs connected by Internet with no regards to their locations. Therefore, it becomes one of the most affordable ways to achieve supercomputing power unlimitedly if the appropriate parallel algorithm and the operating program are developed for this slow network environment. Under the above concept, virtual supercomputing system InterSup I is constructed and tested. To establish the InterSup I system, 64 CPU nodes, which are located in several places and connected by Internet, are conscripted, and parallel finite element software is developed for linear static analysis of structures based on the parallel multi-frontal algorithm. By the established InterSup I system, analysis of finite element structural model having around five million DOFs are solved to check the affordability and effectiveness of Internet Supercomputing.