• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.677-684
• /
• 2020

Our country is already in the aging corner and fall down is the elderly personal, social and economic problems are causing. therefore, executed this study for inquiring into an athletic effect for the balance ability increase that was a main variable of an fall down. The purpose of this study, to find the effect of balance training using visual feedback and somatosensory. Experimental group divided the three groups, objects measured balance ability of each experimental groups before experiment, the balance exercise group used visual feedback by Nintendo Wii(company - model), the balance exercise group used visual and TOGU, the balance exercise group used blind and TOGU. 4 experimental of each groups measured MFT and EMG value after training. having rest time, 4 experimental of each groups measured MFT and EMG value after training used balance pad. MFT - visual feedback with somatosensory training is most efficient but, indifferent both balance training with visual feedback and balance training with somatosensory. EMG - training with somatosensory is more efficient than training with visual feedback. Conclusion : in the process of improving equilibrium ability of patient who is lack of balance ability, somatosensory training is effective to correct different of left, right and frequency of left, right. visual feedback is the most effective way to improve dynamic balance sensory, so parallel of these two practice is thought to be the most effective.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.969-976
• /
• 2010

In vivo studies of KR-31125 (2-butyl-5-dimethoxymethyl-6-phenyl-7-methyl-3-[[2'-(1H-tetrazol-5-yl) biphenyl-4-yl]methyl]-3H-imidazo[4,5-b]pyridine) were performed in pithed rats, conscious angiotensin II (AII) challenged normotensive rats, renal hypertensive rats (RHRs) and furosemide-treated beagle dogs. KR-31125 induced a non-parallel right shift in the dose-pressor response curve to AII ($ID_{50}$: 0.095 mg/kg) with a dose-dependent reduction in the maximum responses in pithed rats. Compared to losartan, this antagonistic effect was about 18 times more potent, presenting competitive antagonism. Other agonists such as norepinephrine and vasopressin did not alter the responses induced by KR-31125. Orally administered KR-31125 had no agonistic effect and dose-dependently inhibited the pressor response to AII with a slightly weaker potency ($ID_{50}$: 0.25 and 0.47 mg/kg, respectively) in the AII-challenged normotensive rat model, but with a more rapid onset of action than losartan (time to $E_{max}$: 30 min for KR-31125 and 6 hr for losartan). KR-31125 produced a dose-dependent antihypertensive effect with a higher potency than losartan in RHRs, and these effects were confirmed in furosemide-treated dogs where they presented a dose-dependent and long-lasting (>8 hr) antihypertensive effect with a rapid onset of action (time to $E_{max}$: 2-4 hr), as well as a 20-fold greater potency than losartan. These results suggest that KR-31125 is a potent, orally active $AT_1$ receptor antagonist that can be applied to the development of new diagnostic and research tools as an added exploratory potential of $AT_1$ receptor antagonist.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.1
• /
• pp.91-99
• /
• 2008

A multilayer tower-type photoreactor, in which $TiO_2$-coated glass-tubes were installed, was used to measure the vapor-phase BTEX removal efficiencies by ozone oxidation ($O_3$/UV), photocatalytic oxidation ($TiO_2$/UV) and the combination of ozone and photocatalytic oxidation ($O_3/TiO_2$/UV) process, respectively. The experiments were conducted under various relative humidities, temperatures, ozone concentrations, gas flow rates and BTEX concentrations. As a result, the BTEX removal efficiency and the oxidation rate by $O_3/TiO_2$/UV system were highest, compared to $O_3$/UV and $TiO_2$/UV system. The $O_3/TiO_2$/UV system accelerated the low oxidation rate of low-concentration organic compounds and removed organic compounds to a large extent in a fixed volume of reactor in a short time. Therefore, $O_3/TiO_2$/UV system as a superimposed oxidation technology was developed to efficiently and economically treat refractory VOCs. Also, this study demonstrated feasibility of a technology to scale up a photoreactor from lab-scale to pilot-scale, which uses (i) a separated light-source chamber and a light distribution system, (ii) catalyst fixing to glass-tube media, and (iii) unit connection in series and/or parallel. The experimental results from $O_3/TiO_2$/UV system showed that (i) the highest BTEX removal efficiencies were obtained under relative humidity ranging from 50 to 55% and temperature ranging from 40 to $50^{\circ}C$, and (ii) the removal efficiencies linearly increased with ozone dosage and decreased with gas flow rate. When applying Langmuir-Hinshelwood model to $TiO_2$/UV and $O_3/TiO_2$/UV system, reaction rate constant for $O_3/TiO_2$/UV system was larger than that for $TiO_2$/UV system, however, it was found that adsorption constant for $O_3/TiO_2$/UV system was smaller than that for $TiO_2$/UV system due to competitive adsorption between organics and ozone.

• Journal of Pharmacopuncture
• /
• v.18 no.1
• /
• pp.72-78
• /
• 2015

Objectives: The stomach is a sensitive digestive organ that is susceptible to exogenous pathogens from the diet. In response to such pathogens, the stomach induces oxidative stress, which might be related to the development of both gastric organic disorders such as gastritis, gastric ulcers, and gastric cancer, and functional disorders such as functional dyspepsia. This study was accomplished to investigate the effect of Ganoderma lucidum pharmacopuncture (GLP) on chronic gastric ulcers in rats. Methods: The rats were divided into 4 groups of 8 animals each: the normal, the control, the normal saline (NP) and the GLP groups. In this study, the modified ethanol gastritis model was used. The rats were administrated 56% ethanol orally every other day. The dose of ethanol was 8 g/kg body weight. The normal group received the same amount of normal saline instead of ethanol. The NP and the GLP groups were treated with injection of saline and GLP respectively. The control group received no treatment. Two local acupoints CV12 (中脘) and ST36 (足三里) were used. All laboratory rats underwent treatment for 15 days. On last day, the rats were sacrificed and their stomachs were immediately excised. Results: Ulcers of the gastric mucosa appeared as elongated bands of hemorrhagic lesions parallel to the long axis of the stomach. In the NP and GLP groups, the injuries to the gastric mucosal injuries were not as severe as they were in the control group. Wound healings of the chronic gastric ulcers was promoted by using GLP and significant alterations of the indices in the gastric mucosa were observed. Such protection was demonstrated by gross appearance, histology and immunehistochemistry staining for Bcl-2-associated X (BAX), B-cell lymphoma 2 (Bcl-2) and Transforming growth factor-beta 1 (TGF-${\beta}1$). Conclusion: These results suggest that GLP at CV12 and ST36 can provide significant protection to the gastric mucosa against an ethanol induced chronic gastric ulcer.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.47-60
• /
• 2004

The permeability coefficients were calculated by the homogenization analysis method with sufficient consideration of fracture geometry dependent on aperture change. According to the results of aperture measurements using a confocal laser scanning microscope, apertures on each measuring point display different magnitudes, indicating that fracture walls can not be assumed as parallel feature. After construction of fracture model based on the aperture values measured on each pressure level, the homogenization analysis was conducted to compute permeability coefficients. The calculated permeability coefficients distribute in the ranges of $10^{-1}~10^{-3}cm/sec$. Most of the specimens show decreasing permeability coefficients with the increase of the applied pressure. However, the decreasing rates of permeability coefficients do not show a constant trend on each pressure level. This phenomenon is well matched to the observation results of Chae et al. (2003). It proves that aperture change strongly influences on permeability characteristics. Three sections of each specimen have all different values of permeability coefficient. It suggests that the variation of permeability coefficient depends sensitively on aperture magnitudes and characteristics of fracture geometry. It is very important to consider accurate fracture geometries for analysis of permeability characteristics in rock fractures bearing different aperture distribution. Therefore, it needs to consider sufficiently the fracture geometries for calculating the permeability coefficients of fractures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.723-730
• /
• 2016

Solar cells in a PV module are connected in series and parallel to produce a higher voltage and current. The PV module has performance characteristics depending on solar radiation and temperature. In addition, the PV system causes power loss by special situations, including the shadows of the surrounding environment, such as nearby buildings and trees. In other words, an increase in power loss and a decrease in life cycle can occur because of the partial shadow and hot-spot effect. Therefore, this paper proposes the optimal configuration algorithm of a bypass diode to improve the output of a PV module and one of a PV array to minimize the loss of the PV array. In addition, this paper presents a model of a PV module and PV array based on the PSIM S/W. The simulation results confirmed that the proposed optimal configuration algorithms are useful tools for improving the performance of PV system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1126-1139
• /
• 2014

World is experiencing abnormal weather caused by urbanization and industrialization increasing greenhouse gas and one of these phenomenon domestically happening is flood and drought. The increase of green-house gases is due to urbanization and industrialization acceleration which are causing abnormal climate changes such as the El Nino and a La Nina phenomenon. It is expected that there will be many difficulties in water management, especially considering the topography and seasonal circumstances in Korea. Unlike in the past, a variety of water conservation initiatives have been undertaken like the river-management flow and water capacity expansion projects. To meet the increasing demand for water resources, new environmentally-friendly small and medium-sized dams have been built. Therefore, the development of a new paradigm for water resources management is essential. This study shows that additional security is needed for potential water resources through diversion tunnels and is very important to consider for future water supplies and situations. Using RCP 6.0 and RCP 8.5 in representative concentration pathway climate change scenario, specific hydrologic data of study basin was produced to analyze past observed basin rainfall tendency which showed both scenario 5%~9% range increase in rainfall. Through sensitivity analysis using objective function, population in highest goodness was 1000 and cross rate was 80%. In conclusion, it is expected that the results from this study will help to make long-term and stable water supply plans by using the potential water resource evaluation model which was applied in this study.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.38-45
• /
• 2017

Objectives: Radon may be second only to smoking as a cause of lung cancer. Radon is a colorless, tasteless radioactive gas that is formed via the radioactive decay of radium. Therefore, radon levels can build up based on the amount of radium contained in construction materials such as phospho-gypsum board or when ventilation rates are low. This study provides our findings from evaluation of radon gas at facilities and offices in an industrial complex. Methods: We evaluated the office rooms and processes of 12 manufacturing factories from May 14, 2014 to September 23, 2014. Short-term data were measured by using real-time monitoring detectors(Model 1030, Sun Nuclear Co., USA) indoors in the office buildings. The radon measurements were recorded at 30-minute intervals over approximately 48 hours. The limit of detection of this instrument is $3.7Bq/m^3$. Also, long-term data were measured by using ${\alpha}-track$ radon detectors(${\alpha}-track$, Rn-tech Co., Korea) in the office and factory buildings. Our detectors were exposed for over 90 days, resulting in a minimum detectable concentration of $7.4Bq/m^3$. Detectors were placed 150-220 cm above the floor. Results: Radon concentrations averaged $20.6{\pm}17.0Bq/m^3$($3.7-115.8Bq/m^3$) in the overall area. The monthly mean concentration of radon by building materials were in the order of gypsum>concrete>cement. Radon concentrations were measured using ${\alpha}-track$ in parallel with direct-reading radon detectors and the two metric methods for radon monitoring were compared. A t-test for the two sampling methods showed that there is no difference between the average radon concentrations(p<0.05). Most of the office buildings did not have central air-conditioning, but several rooms had window- or ceiling-mounted units. Employees could also open windows. The first, second and third floors were used mainly for office work. Conclusions: Radon levels measured during this assessment in the office rooms of buildings and processes in factories were well below the ICRP reference level of $1,000Bq/m^3$ for workplaces and also below the lower USEPA residential guideline of $148Bq/m^3$. The range of indoor annual effective dose due to radon exposure for workers working in the office and factory buildings was 0.01 to 1.45 mSv/yr. Construction materials such as phospho-gypsum board, concrete and cement were the main emission sources for workers' exposure.

• Economic and Environmental Geology
• /
• v.38 no.1
• /
• pp.67-78
• /
• 2005

Riverbank filtration has been used in advanced countries for 150 years. In Korea, investigations for producing riverbank filtrate started in the Han River, Nakdong River, Geum River, Yeongsan River and Seomjin River basins in the 1990s. The lower part of the Nakdong River has a poorer water quality than the upper part of the river. A water balance analysis and groundwater flow modeling were conducted for the riverbanks of the Nakdong River in Daesan-Myeon, Changwon City. The results of the water balance analysis revealed the groundwater infiltration rate into the aquifer to be 245.26 mm/year (19.68% of the average annual precipitation, 1,251.32 mm). Direct runoff accounts for 153.49 mm/year, evapotranspiration is 723.95 mm/year and baseflow is 127.63 mm/year. According to the groundwater flow modeling, 65% of the total inflow to the pumping wells originates from the Nakdong River, 13% originates from the aquifer in the rectilinear direction, and 22% originates from the aquifer in the parallel direction. The particle tracking model shows that a particle moving from the river toward the pumping wells travels 100 m in 50 days and a particle from the aquifer toward the pumping wells travels 100 m in 100 days.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.732-741
• /
• 2001

In the relational database systems the join operation is one of the most time-consuming query operations. Many parallel join algorithms have been developed 개 reduce the execution time Multiple hash join algorithm using allocation tree is one of the most efficient ones. However, it may have some delay on the processing each node of allocation tree, which is occurred in tuple-probing phase by the difference between one page reading time of outer relation and the processing time of already read one. This delay problem was solved by using the concept of synchronization of page execution time with we had proposed In this paper the effects of the performance improvements in each node of the allocation tree are extended to the whole allocation tree and the performance evaluation about that is processed. In addition we propose an efficient algorithm for multiple hash joins in limited number of processor environments according to the relationship between the number of input relations in the allocation tree and the number of processors allocated to the tree. Finally. we analyze the performance by building the analytical cost model and verify the validity of it by various performance comparison with previous method.