• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.123-133
• /
• 1998

Amorphous silicon (a-Si) was crystallized by metal induced crystallization using metal solution. The a-Si films spin coated with a 50,000 ppm Ni solution were crystallized at as low as $500^{\circ}C$. Needlelike morphology, developed as a result of the migration of $NiSi_2$, precipitates, appears in the MIC poly-Si. The growth of the needlelike crystallites proceeds to a direction parallel to (111). The crystallization temperature can be lowered to $450^{\circ}C$ by Au addition. The enhancement of crystallization results from the decrease of interfacial energy at the NiSi2/Si interface by Au addition.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.27.2-27.2
• /
• 2011

Polymer electronics is the one of the most promising way to realize the flexible electronics and many studies made remarkable progress to achieve the improvement in performance of polymer electronics comparable to current silicon-based technology. PBTTT is conjugated semiconducting polymer with highly ordered, chain-extended crystalline microstructures and shows high field effect mobilities above 0.1 $cm^2/Vs$. We studied PBTTTs FETs phase and explored methods to control channel interface in various device structures. Especially, in PBTTTs' unique nano-ribbon phase, we could obtain high mobilities of up to 0.4 $cm^2/Vs$, which was not reached before. Alignment of PBTTTs film was carried out using zone casting and anisotropy of mobilities in parallel and perpendicular to the polymer chain direction was investigated. Optical anisotropy in aligned nano-ribbon PBTTT FETs was also studied using a polarized optical absorption.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.172-177
• /
• 2004

In the present work, we have interests on the modification of parallel implemented with MPI(Message Passing Interface) programming method, 3-Dimensional, unsteady, incompressible Navier-Stokes equation solver to analyze the low-Reynolds number flow In order to accurate calculation aerodynamic coefficients in low-Reynolds number flow field, we modified the two-equation turbulence model. This paper describes the development and validation of a new two-equation model for the prediction of flow transition. It is based on Mentor's low Reynolds $\kappa-\omega$ model with modifications to include Total Stresses Limitation (TSL) and Separation Transition Trigger (STT)

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.345-346
• /
• 2008

본 논문은 원자력 발전소내의 기기들 중 원자로 내부 기기의 초음파 비파괴 검사를 위한 로봇의 위치 제어를 위한 방법을 설명하였다. 기존에는 레일과 같은 보조 시설물을 설치하여 검사를 하는 것이 일반적이었다. 본 논문에서는 이러한 보조 시설물 없이 카메라 영상에 의한 위치제어에 관하여 기술하였다. 여러 가지 방법 중에 정합 필터를 이용하여 로봇의 현재위치를 추정하는 방법을 사용하였다. 본 논문에서 제안된 방법을 실험한 결과 로롯의 제어를 위한 샘플링 타임은 100msec 정도로 일반석인 로봇의 제어 주기로 사용하기에는 다소 길었다. 이를 해결하기 위하여 정합필터를 병렬 계산을 이용하여 계산하도록 하고 이를 병렬언어로 널리 사용되고 있는 MPI(Message Passing Interface) 언어로 구현하였다. 다수의 컴퓨터와 이더넷을 이용할 수 있으며 최근 일반화되고 있는 멀티코어 CPU도 응용이 가능하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.107-112
• /
• 2000

연소실 안으로 분출되는 스월 유동의 vortex breakdown mechanism 에 대한 연구를 하였다. 3 차원 유한 체적기법과 Runge-Kutta 시간 적분법이 적용되었으며, 난류모델은 dynamic large eddy simulation (DLES)이 적용되었다. 계산 시간의 효율성과 기억용량을 효과적으로 사용하기 위하여 message passing interface (MPI) 병렬계산 기법이 적용되었다. 스월 난류 유동에 있어서 vortex breakdown 거동을 가시적으로 표착 하였는데. 이는 스월 유동에 의한 난류 응력 증대, 난류 생성/소산율 증대 및 혼합율 증대에 대한 실험적 근거를 뒷받침하는 매우 중요한 결과이다. 또한 평균 속도와 레이놀스 응력에 대한 계산 결과도 실험 결과와 비교하였다.

• Journal of Mechanical Science and Technology
• /
• v.15 no.10
• /
• pp.1386-1397
• /
• 2001

In this paper, the plane elasticity equations are used to investigate the in-plane normal (mode I) and shear (mode II) behavior of a crack perpendicular to and terminating at the interface in bonded media with a graded interfacial zone. The interfacial Bone is treated as a nonhomogeneous interlayer with the continuously varying elastic modulus between the two dissimilar, homogeneous semi-infinite constituents. For each of the individual loading modes, based on the Fourier integral transform technique, a singular integral equation with a Cauchy kernel is derived in a separate but parallel manner. In the numerical results, the values of corresponding modes of stress intensity factors are illustrated for various combinations of material and geometric parameters of the bonded media in conjunction with the effect of the material nonhomogeneity within the graded interfacial zone.

• Journal of the Korean Society of Combustion
• /
• v.6 no.2
• /
• pp.29-35
• /
• 2001

Unsteady numerical study has been conducted on combustion dynamics of a lean-premixed swirl-stabilized gas turbine swirl injector. A three-dimensional computation method utilizing the message passing interface (MPI) parallel architecture, large eddy simulation(LES), and proper orthogonal decomposition (POD) technique was applied. The unsteady turbulent flame dynamics are simulated so that the turbulent flame structure can be characterized in detail. It was observed that some fuel lumps escape from the primary combustion zone, and move downstream and consequently produce hot spots. Those flame dynamics coincides with experimental data. In addition, basis modes of the unsteady turbulent flame are characterized using proper orthogonal decomposition (POD) analysis. The flame structure based on odd basis modes is apparently larger than that of even ones. The flame structure can be extracted from the summation of the basis modes and eigenvectors at any moment.

• Journal of Korea Technology Innovation Society
• /
• v.1 no.3
• /
• pp.313-325
• /
• 1998

Government-Supported Research Institutes(GSRI) have done complex product(CP) development with national needs. The products to be developed have very limited demand. The most important things at CP development are technology innovation through knowledge creation and acquisition. Then, this paper suggests the technology innovation system for CP development. In CP development like satellite, government must do strategic management at national level and technology management at program level. Two managements are tools to achieve the strategic goals. The key points in CP are integration and interface among subsystems and person. From these factors and innovation system, R&D planning and practice are based on sharing and creation of knowledge. CP development projects ought to overlap and parallel for sustainable acquisition and creation of knowledge.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.781-784
• /
• 2007

본 논문에서는 CFD(Computational Fluid Dynamics) 프로그램의 효율적인 수행을 위한 그리드 시스템 META(Metacomputing Environment using Test-run Application)의 구현을 위한 환경 구축에 대해서 기술한다. META는 그리드 시스템을 기반으로 하기 때문에 META의 구현을 위해서는 먼저 그리드 시스템 환경을 구축하여야 한다. 이를 위해 PBS(Portable Batch System), GT4(Globus Toolkit4), MPI(Massage Passing Interface), PVM(Parallel Virtual Machine), PVMmaker 총 5개의 프로그램이 필요하다. PBS는 각 노드로의 작업 분할을, GT4는 그리드 시스템 미들웨어 역할을, MPI와 PVM, PVMmaker는 병렬 프로그래밍 수행 및 컴파일을 위해서 사용이 된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1662-1667
• /
• 2005

In this paper, analysis, design, control and prototype construction of a wearable wire-driven haptic interface called HapticPen is discussed. This device can be considered as a wire driven parallel mechanism which three wires are attached to a pen-tip. Wire tensions are provided utilizing three DC servo motors which are attached to a solid frame on the user's body. This device is designed as input as well as output device for a wearable PC. User can write letters or figures on a virtual plate in space. Pen-tip trajectory in space is calculated using motor encoders and force feedback resulting from contact between pen and virtual plate is provided for constraining the pen-tip motion onto the virtual plane that can be easily setup by arbitrary non-collinear three points in space. In this paper kinematic model, workspace analysis, application analysis, control and prototype construction of this device are presented. Preliminary experiments on handwriting in space show feasibility of the proposed device in wearable environments.