• 드라이브 ㆍ 컨트롤
• /
• 제13권1호
• /
• pp.18-26
• /
• 2016

This research is conducted to develop an automatic steering system for parallel parking, and the performance of the system was evaluated by parallel parking a conventional vehicle. The automatic steering system consisted of MDPS (motor driven power steering) to control steering, ESC (electronic stability control) to acquire wheel speed, ultrasonic sensors to recognize the parking space, and a controller to communicate and handle data. The parallel parking process using the automatic steering control consisted of parking space recognition, parking path generation, and parking path tracking. The path for parallel parking was generated based on a kinematic model of a conventional vehicle, and a PI controller was used to control the steering angle for path tracking. Parallel parking using the automatic steering control was conducted according to vehicle speed conditions. The results show that the errors on the x-axis and y-axis were below 0.54 m and 0.14 m, respectively, and the error on the steering angle was less than $1^{\circ}$. Therefore, it is possible to implement parallel parking using an automatic steering control system for conventional vehicles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.31-32
• /
• 2012

• Journal of Biosystems Engineering
• /
• 제38권1호
• /
• pp.1-8
• /
• 2013

Purpose: Path planning and tracking algorithms applicable to various agricultural operations, such as tillage, planting, and spraying, are needed to generate steering angles for auto-guidance tractors to track a point ahead on the path. An optimal coverage path algorithm can enable a vehicle to effectively travel across a field by following a sequence of parallel paths with fixed spacing. This study proposes a path generation and tracking algorithm for an auto-guided Korean tractor with a tillage implement that generates a path with C-type turns and follows the generated path in a paddy field. A mathematical model was developed to generate a waypoint path for a tractor in a field. This waypoint path generation model was based on minimum tractor turning radius, waypoint intervals and LBOs (Limit of Boundary Offsets). At each location, the steering angle was calculated by comparing the waypoint angle and heading angle of the tractor. A path following program was developed with Labview-CVI to automatically read the waypoints and generate steering angles for the tractor to proceed to the next waypoint. A feasibility test of the developed program for real-time path tracking was performed with a mobile platform traveling on flat ground. The test results showed that the developed algorithm generated the desired path and steering angles with acceptable accuracy.

• 한국운동역학회지
• /
• 제24권3호
• /
• pp.201-207
• /
• 2014

This study investigated the center of mass and lower extremity kinematic patterns between carved and basic paralell turn during alpine skiing. Six experienced skiers (age: $20.67{\pm}4.72yrs$, body mass: $72.67{\pm}7.15kg$, height: $171.00{\pm}5.51cm$) participated in this study. Each skier were asked to perform carved and basic paralell turn on a $22.95^{\circ}$ groomed slope. Each turn was divided into the initiation phase, steering phase 1 and 2. The results of this study show that the carved turn spent significantly less running time than basic paralell turn at all three phases (p<.05). Also vertical displacement of the center of mass was significantly greater in carved turn at all three phases, whereas inward leaning angle of the center of mass was significantly greater in carved turn at the steering phase 1 and 2 (p<.05). Bilateral knee and hip joint angle were significantly greater in basic paralell turn at the initiation phase and the steering phase 2 (p<.05). On the other hand, left knee and hip joint angle were significantly greater in basic paralell turn at the steering phase 1 (p<.05). In order to perform successful carved turn, we suggest that skiers should coordinate bilateral knee and hip joint angles to adjust the center of mass, depending on three ski turn phases.

• Journal of Biosystems Engineering
• /
• 제27권2호
• /
• pp.79-88
• /
• 2002

This study was conducted to develop system for high speed rice transplanting machines. The control system includes a sensor detecting the tilt angle of the seedling bed, a micro-controller and a hydraulic system consisting of a double acting cylinder, a four-way three-position solenoid valve, a relief valve and a hydraulic pump. The levelling system shared the pump with the existing steering control, resulting in a tandem center circuit for the steering and levelling control systems. Using the input signal from the sensor, the micro-controller determined and generated the output signal to control the cylinder through the solenoid valve to keep the seedling bed always parallel to the water surface regardless of soil unevenness during the transplanting operations. Both an ON/OFF and a PWM control schemes were tested. When the flow rate was more than 1 ι/min in the ON/OFF control, the system showed unstable rolling. However, in the PWM control, the system worked stably although the flow rate was more than 1 ι/min. The PWM control showed a better performance when a large difference between the angle and the dead band of the control system occurred. The characteristics of tile system response to given tilt angles were predicted by a computer simulation. Both the ON/OFF and the PWM control systems worked well providing that the operating and waiting times were properly adjusted.

• 전자공학회지
• /
• 제23권12호
• /
• pp.115-125
• /
• 1996

This paper presents a new algorithm for the self-localization of a mobile robot using one degree perspective Invariant(Cross Ratio). Most of conventional model-based self-localization methods have some problems that data structure building, map updating and matching processes are very complex. Use of a simple cross ratio can be effective to the above problems. The algorithm is based on two basic assumptions that the ground plane is flat and two locally parallel sloe-lines are available. Also it is assumed that an environmental map is available for matching between the scene and the model. To extract an accurate steering angle for a mobile robot, we take advantage of geometric features such as vanishing points. Feature points for cross ratio are extracted robustly using a vanishing point and intersection points between two locally parallel side-lines and vertical lines. Also the local position estimation problem has been treated when feature points exist less than 4points in the viewed scene. The robustness and feasibility of our algorithms have been demonstrated through real world experiments In Indoor environments using an indoor mobile robot, KASIRI-II(KAist Simple Roving Intelligence).

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.465-473
• /
• 2014

This paper proposes a formation control method by which multi-mining robots maintain a specified formation and follow a path. To secure the path tracking performance, a pure-pursuit algorithm is considered for each individual robot, and to minimize the deviation from the reference path, speed reduction in the steering motion is added. For the formation, in which two robots are parallel in a lateral direction, the robots track the specified path at a constant distance. In this way, the Leader-Follower method is adopted and the following robot knows the position and heading angle of the leader robot. Through the experimental test using two ground vehicle models, the performance is verified.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.176-182
• /
• 2003

The researches for autonomous vehicle have been implemented in many studies, but most studies were confined to the lane fol1owing and changing. This paper addresses a problem of autonomous lane following parking a nonholonomic vehicle. The algorithm for image processing by the hough transform and controlling a steering angle and speed to park a nonholonomic vehicle is developed. The developed system which integrated the control algorithm for parking and vision algorithm for line traction tested with RC car and verified by the performance of the detection of parking area and the reactive parking without collisions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.920-923
• /
• 1996

This paper presents a new algorithm for the self-localization of a mobile robot using perspective invariant(Cross Ratio). Most of conventional model-based self-localization methods have some problems that data structure building, map updating and matching processes are very complex. Use of the simple cross ratio can be effective to the above problems. The algorithm is based on two basic assumptions that the ground plane is flat and two parallel walls are available. Also it is assumed that an environmental map is available for matching between the scene and the model. To extract an accurate steering angle for a mobile robot, we take advantage of geometric features such as vanishing points(V.P). Point features for computing cross ratios are extracted robustly using a vanishing point and the intersection points between floor and the vertical lines of door frames. The robustness and feasibility of our algorithms have been demonstrated through experiments in indoor environments using an indoor mobile robot, KASIRI-II(KAist SImple Roving Intelligence).

• 한국정보처리학회논문지
• /
• 제3권5호
• /
• pp.1037-1045
• /
• 1996

본 논문은 전방차량 추적에 있어서 스테레오 카메라 패러렐 모델을 사용하여 전방 차량과의 거리 및 헤딩앵글 데이터를 추출하고 이들 데이터를 이용하여 무인자동차 ART(Binocular Autonomous Research Team vehicle)를 제어하는 방법에 관한 것이다. 무인자동창의 제어는 2개의 역전달 뉴럴네트워크의 일종인 TDNN(Time De-lay Neural Network)을 각각 독립적으로 사용하였다. 그중 하나는 S-TDNN으로 추적차량의 속도와 전방차량과의 거리를 제어하며, 다른 하나는 A-TDNN으로 무인차량의 스티어링 앵글을 전담 제어한다. 인간 운전자가 전방차량을 추적하면서 수집한 제이터를 이용하여 상기 뉴럴네트워크를 학습시키며, 학습된 뉴럴네트워크는 인간이 운전하였을 때와 같은 조건하에서 전방차량의 추적을 만족스럽게 수행하였다. 뉴럴네트워크를 이용한 제어프 로그램은 이식성이 높아 다른 종류의 차량에도 쉽게 적용할 수 있어 타모델에 적용 시에 개발경비와 소요 시간을 줄일 수 있는 장점이 있다.