• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1921-1930
• /
• 1997

This paper presents the effective technique to design a six-axis load cell by using experimental design with an orthogonal array. A binocular structure is used as a basic sensing element for a load cell instead of the parallel plate structure. The finite element method is adopted to obtain strain distributions of the sensing element, and by doing the analysis of variances, its results are utilized in determining the factor which is more influential to the output strain. Calibration test results show that the developed six-axis loa cell with the maximum capacities of 196 N in forces and 19.6 N. m in moments is evaluated to be useful with the coupling error less than 2.5%.

• 한국결정학회지
• /
• 제13권3_4호
• /
• pp.152-157
• /
• 2002

X선 회절법을 이용하여 Tricyclazole, C/sub9/H/sub7/N₃S 분자 및 결정 구조를 규명하였다. 화합물의 결정학 자료: Orthorhombic 공간군 Pca2₁, a=14.889(1) Å, b=7.444(1) Å, c=15.189(2) Å, V=1683.3(3) ų, Z= 8분자 구조는 직접법으로 풀었고 완전최소자승법으로 정밀화하여 1533(F/sub o//sup 2/>4σ(F/sub o//sup 2/))인 독립회절반점에 대하여 최종 신뢰도값 R=0.047을 얻었다. 구조 해석 결과 두 분자가 asymmetric 단위로 구성되어 있으며 각각의 분자는 서로 거의 평형을 이루면서 b축 방향으로 유사 4-fold screw를 이루고 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2879-2884
• /
• 2007

Dynamic responses of electrorheological (ER) fluids in steady pressure flow to stepwise electric field excitations are investigated experimentally. The transient periods under various applied electric fields and flow velocities were determined from the pressure behavior of the ER fluid in the flow channel with two parallel-plate electrodes. The pressure response times were exponentially decreased with the increase of the flow velocity, but increased with the increase of the applied electric field strength. In order to investigate the cluster structure formation of the ER particles, it was verified using the flow visualization technique that the transient response of ER fluids in the flow mode is assigned to the densification process in the competition of the electric field-induced particle attractive interaction forces and the hydrodynamic forces, unlike that in the shear mode determined by the aggregation process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.953-956
• /
• 2005

Low voltage actuation and high isolation characteristics are key features to be solved in electrostatic RF switch design. Since these parameters in the conventional parallel plate MEMS switch design are in trade-off relation, both requirements cannot be met simultaneously. In vertical comb design, however, the actuation voltage is independent to the vertical separation distance between the contact electrodes. Then, we can design the large separation distance between contact electrodes to get high isolation. We have designed an RF MEMS switch which has -40dB isolation at 5 GHz and 6 V operation voltages. The characteristics of the fabricated switch are being evaluate.

• 소음진동
• /
• 제10권3호
• /
• pp.423-429
• /
• 2000

This paper investigates the use of boundary element method(BEM) to analyze the insertion loss of a noise barrier. To begin with the validity of the BEm for the analysis of noise barrier insertion loss in checked by both Lam's theoretical method and the measurements in the anechoic chamber for the scale-down models. Through simulation it is shown that using 2D BEM model is sufficient to the analysis for the barrier with large ratio of length to height. By using 2D BEM model the insertion loses are predicted for the real noise barriers in several cases which are the case that they are built parallel on both roadsides the one that there are multiple sound sources and the one that there is a gap between a concrete structure and a barrier plate.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2003년도 춘계종합학술대회논문집
• /
• pp.403-405
• /
• 2003

학부생들이 쉽게 사용할 수 있는 기법인 반복 그린함수 방법(IGFM)을 이용하여 복잡한 전자파 도파관 구조를 이론적으로 해석한다. IGFM은 그린함수와 반복법을 이용한다. IGFM의 간단한 공식화를 위해 단순한 수학 방정식만을 사용한 물리적인 메커니즘을 이용한다. 전형적인 전자파 도파관 구조인 평행판 E평면 T접합에 대한 산란 특성을 IGFM 관점에서 이론적으로 공식화한다. 수치해석 결과를 주파수에 대한 반사와 투과 전력 관점에서 보인다. 우세모드 해를 유도하고 그 결과를 고차모드에 의한 해와 비교한다.

• 한국콘텐츠학회논문지
• /
• 제7권2호
• /
• pp.125-131
• /
• 2007

학부생들이 쉽게 사용할 수 있는 기법인 반복 그린 함수 방법(IGFM)을 이용하여 복잡한 전자파 도파관스텁 구조를 이론적으로 엄밀하게 해석한다. lGFM은 그린 함수 접근법과 영역 반복법을 이용한다. IGFM의 간단한 공식화를 위해 단순한 수학 방정식만을 사용한 물리적인 반복 메커니즘을 이용한다. 전형적인 전자파 도파관 구조인 평행판 E평면 T접합 스텁에 대한 산란 특성을 IGFM 관점에서 이론적으로 공식화한다. 수치해석 결과를 주파수에 대한 반사와 투과 전력 관점에서 보인다.

• Wind and Structures
• /
• 제4권2호
• /
• pp.85-100
• /
• 2001

The mechanism of wind-induced ovalling vibrations of cylindrical shells is numerically investigated by using a vortex method. The subject of this paper is limited to a two-dimensional structure in the subcritical regime. The aerodynamic stability of the ovalling vibrations in the second to fourth circumferential modes is discussed, based on the results of a forced-vibration test. In the analysis, two modal configurations are considered; one is symmetric and the other is anti-symmetric with respect to a diameter parallel to the flow direction. The unsteady pressures acting on a vibrating cylinder are simulated and the work done by them for one cycle of a harmonic motion is computed. The effects of a splitter plate on the flow around the cylinder as well as on the aerodynamic stability of the ovalling vibrations are also discussed. The consideration on the mechanism of ovalling vibrations is verified by the results of a free-vibration test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.272-277
• /
• 2003

This paper reports the fluid flow and heat transfer around a module cooled by forced air flow generated by a piezoelectric(PZT) cooling fan. A flexible PZT fan with distortion in a fluid transport system of comparatively simple structure which was mounted on a PCB in a parallel-plate channel($450{\times}80{\times}700mm^3$) accelerates surrounding fluid locally. Input voltages of 20-100V and a resonance frequency of 23Hz were used to vibrate the cooling fan. Input power to the module was 4W. The cooling effect using a PZT fan was larger than that of free convection. Fluid flow around the module were visualized by using PIV system. The temperature distribution around heated module were visualized by using liquid crystal film(LCF). We found that the flow type was y-shaped and the cooling effect was increased by the wake generated by a piezoelectric cooling fan.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.155-162
• /
• 2015

Abalone (Haliotis discus hannai) is a shellfish that feeds on kelp and, as a product, it can often achieve a high market value. However, the dissolved oxygen (DO) levels in coastal waters in Korea have been negatively impacted by pollution from many anthropogenic sources. Herein, a computational fluid dynamics (CFD) software package was used to analyze the distribution of the DO concentration within an abalone containment structure. A finite volume approach was used to solve the Reynolds-averaged Navier-Stokes equations combined with a $k-{\varepsilon}$ turbulence model to describe the flow. The distribution of DO was determined within the control volume domain, and the transport equations of the pollutants were interpreted using a CFD model. The CFD analysis revealed that more than 60% and 30% of the relative oxygen concentration in one and two containers, respectively, was maintained when the flow acts along the six sheets of polyethylene plates. Therefore, it is clear that the abalone plate shelters should be placed parallel to the flow.