• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1229-1239
• /
• 1996

The increase of additional information broadcasting of TV demands a graphic overlay processor. This paper is about the design, implementation and testing of a graphic overlay processor called by KBPS decoder ASSP (Applicatio n Specific Standard Product) which is compliance with Korea Broadcast Programming System. KBPS decoder ASSP consists of embedded 8 bit microprocessor Z80, graphic overlay controller, KBPS schedule decoder, memory controller, priority interrupt controller, MIDI controller, infrared raccoon receiver, async scrial communication controller, timer, bus controller, universal parallel input-output port and serial-parallel interface. The 0.8 micron CMOS Sea of Gate is used to implement the ASSP in amount of about 31,500 gates, and it is running at 14.318MHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1975-1980
• /
• 2004

A parallel active power filter is designed and implemented to compensate for undesired current harmonics generated by a nonlinear load. The filter works based on PWM strategy and control signal is generated using a model predictive controller. To evaluate the achievements, a PI controller is also designed and implemented. Experimental results indicate about 50% increase in the efficiency over PI controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.426-432
• /
• 2012

In this study, kinematic analysis of forward kinematic, inverse kinematic and jacobian for 6-bar parallel robot was analyzed. In order to analyze the maximum workspace of 6-bar parallel robot, maximum revolution range of active joint was calculated. Also, to analyze forward dynamics and inverse dynamics of 6-bar parallel robot, recurdyn and simmechanics was utilized. Using a PI controller and Feedforward controller make an experiment with square motion of end_effector. The reference value of active joint and trace of end_effector were compared with actual experimental value.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.4
• /
• pp.378-384
• /
• 2005

This paper proposes a new series and parallel Sin+Cos PSS (power system stabilizer) for the purpose of improving the existing PSS1A's performance. The purpose of the PSS is to enhance the damping of power system oscillations through injection of auxiliary signals for an excitation control terminal. The proposed series and parallel Sin+Cos PSS is connected adding the Sin+Cos terms additionally with the serial and parallel connection in a conventional PSS1A. The proposed controller is aimed at considering the damping of oscillation when it changes parameter fluctuations or operational load variations in a power system. The electric power system used is the KEPCO system and the voltage of the power transmission line is 154kV and 345kV. The PSCAD/EMTDC package is used to authorize the effect of the proposed controller. Simulations were shown by and compared with the waveforms for frequency, voltage and electric power.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.260-270
• /
• 1994

With the prevalent use of robot, the interests in moving speed of robot have been increasing for the purpose of upgrading performance of production. But the faster robot manipulator moves, the worse working accuracies are. And mechanical vibration is more and more serious with the increment of the moving speed of robot. So, the study on the cause and control method of robot vibration is one of the points of issue in robotics. This paper focuses on the vibration of 3 DOF parallel link drive mechanism robot. We assume that links of robot manipulator are `rigid' and joints are `flexible elements'. Governing equations of robot system including controller, servo amplifier, D.C servo motor, transmission with elasticity, and manipulator dynamics are derived. On the basis of modelling, we define `controller stiffness' by the proportional gain of controller and `stiffness of transmission'. Numerical and experimental research is performed to study vibration phenomena of robot induced from the variation of these two defined stiffnesses, and its results are shown.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.776-787
• /
• 2000

Write requests which stored in disk cache of the RAID5 controller should be destaged to disk arrays according to the destage algorithm. As the response performance of the parallel IO request is being hit by the effect of the destage, several destage algorithms have been studied to enhance the performance of he RAID5 controller. Among the destage algorithms, the load balancing destage algorithm has better performance than other destage algorithms when system load is highly increased. But the load balancing destage algorithm gives priority to load balance among the disks in disk arrays, therefore, when some disks are affected by the very heavy system load caused by small data requests, the load balancing destage algorithm cannot enhance the performance of parallel IO requests effectively since it makes effort to maintain the load balance without the benefit of the locality of the write requests. This paper proposes a new RAID5 controller that applied reference-load balancing destage algorithm which decides the destage priority based on the reference history and load distribution of the disks. The simulation results show that RAID5 controller with the reference-load balancing destage algorithm has better performance than previous load balancing destage algorithm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.40-45
• /
• 2004

This paper presents the parallel distributed control scheme for shaping of the bent glass. The designed system consists of a PC, a main controller and 11 servo-controllers, the precision motion controllers. Each elements are connected by using RS-232C and 8-bit data bus. In order to guarantee the stability and the control performance, we use a precision PID motion controller and a H-bridge on the servo-drivers. PC calculates position values of 11 DC motors by using the pre-determined curvature value and offers the user interface environment operator. The main controller provides the control instructions and parameter values to 11 servo-controllers by chip enable signal, simultaneously. Using the received commands and parameter values, the servo-controllers control the positions of the DC motors based on PID control scheme.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.60-65
• /
• 2004

Induction heating system is time varying system around curie point. So, it has many troubles which are system shut down and change the load impedance. In this paper has been designed the parallel resonant inverter which controlling the constant power and tracking the load resonant frequency with PLL is possible, in order to minimize switching losses and solve it's many troubles. The current full-bridge type parallel resonant inverter of an induction heating system was composed of IGBT in switching device. For regulating the output power of an induction heating system, the Fuzzy logic controller is used. The Fuzzy controller makes the control signal for a stable power regulating control and when reference is changed, it is superior to adaptability. It has been evaluated a stable behavior for a noise with switching and a load disturbance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.5
• /
• pp.367-375
• /
• 2022

Generally, a proportional-resonant controller is used to eliminate steady-state errors during the voltage-current control of a double-conversion uninterruptible power supply (UPS) in a stationary reference frame. Additionally, the feed-forward control compensating for the load current, which can be considered a disturbance of the voltage controller, can be used to improve the disturbance rejection performance. However, during the parallel operation of UPSs, circulating current can occur between UPS modules when performing both feed-forward control and droop control because feed-forward control reduces the circulating current impedance. This study proposes a feed-forward compensation technique that considers the impedance of circulating current. An additional feed-forward compensation technique is developed to enhance the disturbance rejection performance. The validity of the proposed feed-forward compensation technique is verified by the experiment results of the parallel operation of a 500 W double-conversion UPS module.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.65-68
• /
• 2008

This paper proposes the parallel operation control algorithm of a power conditioning system (PCS) for a distributed Fuel Cell power generation system. A proposed control algorithm is made good a drawback of the conventional control algorithm. The controller must also supervise the total PCS operation while communicating with the fuel cell system controller. Simulation results are presented to performance of a proposed control algorithm for the PCS.