• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.292-295
• /
• 2004

The SIT was introduced by Nishizawa. in 1972. When compared with high-voltage, power bipolar junction transistors, SITs have several advantages as power switching devices. They have a higher input impedance than do bipolar transistors and a negative temperature coefficient for the drain current that prevents thermal runaway, thus allowing the coupling of many devices in parallel to increase the current handling capability. Furthermore, the SIT is majority carrier device with a higher inherent switching speed because of the absence of minority carrier recombination, which limits the speed of bipolar transistors. This also eliminates the stringent lifetime control requirements that are essential during the fabrication of high-speed bipolar transistors. This results in a much larger safe operating area(SOA) in comparison to bipolar transistors. In this paper, vertical SIT structures are proposed to improve their electrical characteristics including the blocking voltage. Besides, the two dimensional numerical simulations were carried out using ISE-TCAD to verify the validity of the device and examine the electrical characteristics. A trench gate region oxide power SIT device is proposed to improve forward blocking characteristics. The proposed devices have superior electrical characteristics when compared to conventional device. Consequently, the fabrication of trench oxide power SIT with superior stability and electrical characteristics is simplified.

• Allergy, Asthma & Immunology Research
• /
• v.10 no.6
• /
• pp.686-697
• /
• 2018

Purpose: Several markers for eosinophilic inflammation have been proposed to predict response to asthma treatment. However, definitive criteria for treatment decisions have not yet been established. We investigate a potentially useful relatively non-invasive biomarker, eosinophil-derived neurotoxin (EDN), to predict favorable responses to budesonide or montelukast, common treatment for children with asthma. Methods: Young children (1 to 6 years old) were enrolled in this randomized, parallel, 2-group, open-label trial. Criteria for eligibility included: 1) being symptomatic during the run-in period; and 2) having a serum EDN (sEDN) level ${\geq}53ng/mL$, with positive specific immunoglobulin E to house dust mite. Eligible patients were randomly placed into 2 groups: the BIS group received budesonide inhalation suspension (BIS) 0.5 mg once daily; the MONT group received montelukast 4 mg once daily. Ineligible patients were invited to receive montelukast 4 mg once daily (OBS group). Treatment period was 12 weeks. Results: Asthma control days increased significantly in the BIS and MONT groups (P < 0.000) over the 12-week study period. There was no significant change in sEDN in the BIS group but there was a significant decrease in the MONT group (P < 0.000). Patients in the OBS group with high EDN levels (> 53 ng/mL) showed a significant decrease due to MONT treatment (P = 0.023). Rescue medication usage significantly decreased in the BIS and MONT groups (P < 0.000). Conclusions: EDN is a useful relatively non-invasive biomarker for predicting responses to montelukast and budesonide treatment of preschool children with beta2-agonist responsive recurrent wheeze and multiple-trigger wheeze (Trial registry at UMIN Clinical Trials Registry, UMIN000008335).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.3
• /
• pp.103-110
• /
• 2021

A shake table test is conducted for the three-story reinforced concrete building structure using 0.28 g, 0.5 g, 0.75 g, and 1.0 g of seismic input motions based on the Gyeongju earthquake. Computational efforts are made in parallel to explore the mechanical details in the structure. For engineering practice, the elastic modulus of concrete and rebar in the dynamic analysis is reduced to 38% and 50%, respectively, to calibrate the structure's natural frequencies. The engineering approach to the reduced modulus of elasticity is believed to be due to the inability to specify the flexibility of the actual boundary conditions. This aspect may lead to disadvantages of nonlinear dynamic analysis that can distort local stress and strain relationships. The initial elastic modulus can be applied directly without the so-called engineering adjustment with infinite element models with spring and spring-dashpot boundary conditions. This has the advantage of imposing the system flexibility of the structure on the sub-boundary conditions of springs and damping devices to control its sensitivity in a serial arrangement. This can reflect the flexibility of realistic boundary conditions and the effects of system damping (such as the gap between a concrete footing and shake table, loosening of steel anchors, etc.) in scalar quantities. However, these spring and dashpot coefficients can only be coordinated based on experimental results, making it challenging to select the coefficients in-prior to perform an experimental test.

• Food Science of Animal Resources
• /
• v.38 no.6
• /
• pp.1237-1245
• /
• 2018

In this study, the contamination levels of hygienic indicators and foodborne pathogens in retail meat products were investigated in relation to the various market factors including processing temperature, processing area, and market type. Ground beef samples (n=80) were purchased from 40 meat markets and investigated for microbiological quality. Beefs processed below $20^{\circ}C$ had significantly lower numbers of total coliforms (TC) than these processed over $20^{\circ}C$ (2.01 vs. 2.79 log CFU/g; p<0.05). Interestingly, separation of processing area did not affect the contamination levels. Remarkably, the contamination levels of hygienic indicator differ among market types, indicating that not only processing condition but distribution structure that is directly related with storage period could affect the final microbiological loads of the meat products. In addition, the prevalences of Listeria monocytogenes (a psychrotroph), Enterococcus faecium, and Enterococcus faecalis were 7.5% (6/80), 10.0% (8/80), and 20.0% (16/80), respectively, which is irrelevant to market factors except meat products from wholesale markets where no L. monocytogenes were found among 30 samples. The results of this study indicate that the contamination level of hygiene indicator and foodborne pathogens in retail beef is more related with processing temperature and storage period than other environmental factors.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1145-1154
• /
• 2018

In order to prevent interference and interference of the frequency, it is required to convert the regulatory standard into the center of the radiation power radiated to the actual public. Since the radiation power regulation is related to general radio management such as technical standards, permits, and inspections, it is gradually introduced in consideration of applicability and urgency, and the radiation power related laws of major countries And a method of controlling the output of the radio equipment such as measurement, inspection, and authentication. In Korea, the proportion of antenna power supply is high, and in Europe, radiation power is high. Since the number of radio stations will increase and diversify in the future, institutional improvement should be made so that it can be measured in parallel with the radiocommunication infrastructure of the space manager. In order to convert to the radiative power management system, the system for the related radio system needs(Technical standards, certification, inspection of radio stations, post-management, etc.) to be improved.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.271-282
• /
• 2019

The purpose of this study is to identify the antimicrobial effects of SSH(三神丸) and synerggy effects of the existing antibiotics Oxacillin and Ciprofloxacin on MRSA and to identify the mechanisms. In this case, the procedure and method for verifying anti-bacterial activity and active concentration of MARA by measuring the minimum inhibitory concentration (MIC) of the trichin is used to verify the potency and active concentration of MARA, to confirm the potency of the disease by treating antibiotics and trichine ethanol extract in parallel, and to confirm the anti-bacterial effect over time, when the trichine is activated as an anti-bacterial activity to MARA, and a compound. In addition, we hope that this research will not only serve as meaningful data for the development of new drugs to control MARA immunity, but also serve as an opportunity to further accelerate the research and development of antibiotics to overcome resistant strains.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.9-22
• /
• 2019

In this paper, we propose a method that can be applied to the efficient implementation of multi-channel active noise controller. Since the normalized MFxLMS (Modified Filtered-x Least Mean Square) algorithm for the multi-channel active noise control requires a large amount of computation, the difficulty has lied in implementing the algorithm using a low-cost MCU (Microcontoller Unit). We implement the multi-channel active noise controller efficiently by optimizing the software based on the features of the MCU. By maximizing the usage of single-cycle MAC (Multiply- Accumulate) operations and minimizing move operations of the delay memory, we can achieve more than 3 times the performance in the aspect of computational optimization, and by parellel processing using the auxillary processor included in the MCU, we can also obtain more than 4 times the performance. In addition, the usage of additional parts can be minimized by maximizing the usage of the peripherals embedded in the MCU.

• Korean Journal of Metals and Materials
• /
• v.50 no.4
• /
• pp.338-343
• /
• 2012

The early osseointegration of titanium (Ti) dental implants is related to the initial cell morphology. The morphology of the cells (mesenchymal stem cells, MSC) was observed on three different Ti disc surfaces, which were mechanically treated by polishing, blasting, and scratching. A non-directional surface (isotropic texture) was obtained by the blasting of HA grits on cp-Ti discs, and a unidirectional surface (anisotropic texture) was obtained by the scratching of SiC papers. The cell attachment and arrangement in the initial periods were quite similar, but those in the later periods were significantly affected by the texture of the cp-Ti discs. After 1 week, the blasted Ti discs showed non-directional arrangement or spreading of the cells, whereas the scratched cp-Ti discs showed unidirectional properties parallel to the direction of the scratched grooves on the surface. The surface roughness of the cp-Ti discs significantly affects cell proliferation. Cell proliferation on the blasted and scratched surfaces was about 60% and 40% higher compared to the control result (polishing group) after 1 week (P<0.05). Cell proliferation on the blasted and scratched surfaces after 1 week was slightly enhanced with increasing surface roughness. It is believed that the direction of cell attachment and arrangement is closely related to the surface texture of the substrate surfaces, but cell proliferation after a relatively long period of time is directly enhanced by the surface roughness, not by the surface texture.

• Journal of Environmental Analysis, Health and Toxicology
• /
• v.21 no.4
• /
• pp.209-219
• /
• 2018

In the areas of RoHS, WEEE, ELV and REACH, reinforcement of environmental regulations against harmful substances is a global trend not only in EC but also in all over the world. In the fields of Korea's major export products such as material parts, electrical and electronic products and automobile parts, we are responding to these regulations consistently. To develop reference material for analyzing lead and cadmium in paints, the candidate materials were produced through the screening process which separated shapes and sizes. To secure the traceability of the candidate materials produced, the characteristics and uncertainties are estimated by ICP-AES analysis using the primary reference material. The short-term and long-term stabilities also are evaluated in parallel. In order to calculate the final certification value of the candidate material, the verification were carried out by the performance evaluation through the comparison among the KOLAS (Korea Laboratory Accreditation Scheme) laboratories, and the CRM was produced in accordance with ISO Guide 35. The certified values and uncertainties of Pb and Cd of the final paint standard, determined according to the joint analysis among laboratories, are Pb [($191.4{\pm}3.1$) mg/kg, ($944.1{\pm}5.6$) mg/kg] and Cd [($45.0{\pm}2.6$) mg/kg, ($225.5{\pm}3.5$) mg/kg]. These standard materials were developed to enhance the reliability of measurement analysis, including the validity and traceability of measurement results. Also it is expected that the CRM will be used as QCM (quality control material) for the product design and the process monitoring, so that regulation and management of hazardous heavy metals can be systematically implemented.

• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.191-196
• /
• 2022

Unlike an international combustion engine car, a battery-powered electric vehicle requires an additional heat source for its heating system. A high-voltage coolant heater has the advantages of high efficiency and a wide operating temperature range. In its development, the geometry design of the coolant flow path is essential. This paper presents the thermal flow simulations of a 7kW high-voltage heater with symmetric serpentine flow channels arranged parallelly. The heater performance was evaluated from the simulation results in terms of the pressure and temperature differences and the flow uniformity. The proposed design showed a greater flow resistance and similar heat exchanging capability than the existing parallel serpentine design. It has the advantage of a relatively wide low-temperature surface area, where the control circuit board susceptible to high temperatures can be located.