• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.21-30
• /
• 2018

Driven by the recent energy saving trend, conventional silicon based power conversion modules are being replaced by modules using silicon carbide. Previous papers have focused mainly on the electrical advantages of silicon carbide semiconductors that can be used to design switching devices with much lower losses than conventional silicon based devices. However, no systematic study of their thermomechanical reliability in power conversion modules using finite element method (FEM) simulation has been presented. In this paper, silicon and silicon carbide based power devices with three-phase switching were designed and compared from the viewpoint of thermomechanical reliability. The switching loss of power conversion module was measured by the switching loss evaluation system and measured switching loss data was used for the thermal FEM simulation. Temperature and stress/strain distributions were analyzed. Finally, a thermal fatigue simulation was conducted to analyze the creep phenomenon of the joining materials. It was shown that at the working frequency of 20 kHz, the maximum temperature and stress of the power conversion module with SiC chips were reduced by 56% and 47%, respectively, compared with Si chips. In addition, the creep equivalent strain of joining material in SiC chip was reduced by 53% after thermal cycle, compared with the joining material in Si chip.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.55-61
• /
• 2022

다중 암의 동시 진단 기술에 대한 관심이 전 세계적으로 증가하는 추세이며, 진단 난이도를 낮추기 위해 혈액과 같은 미량의 바이오 유체를 이용하여 질병을 진단하는 미세 유체 소자 기반의 액체 생검 기술이 연구되고 있다. 바이오 유체를 이용하여 형광 영상 등을 통해 분석물질의 농도를 측정하는 광학적 바이오 센싱에 있어 민감도를 향상시키기 위한 기술개발이 필요하다. 본 논문에서는 모세관력에 의한 자가구동 기반의 마이크로 채널의 기하학적 구조와 미세 유체 현상만으로 수동적 자기 혈장 분리 기술과 유체 혼합을 통한 분자 인식 활성화 기능을 구현하는 형광 다중 암 진단 센서 플랫폼 구조를 제안하고 설계하였다. 설계된 센서의 혈장 분리부의 성능에 영향을 미치는 파라미터를 확인하기 위해 채널의 수력학적 직경과 종횡비, 유체의 점도를 변수로 설정하여 딘 와류 형성 여부를 시뮬레이션을 통해 확인하였고 최적의 센서 플랫폼 구조를 제시하였다.

• 마이크로전자및패키징학회지
• /
• 제30권4호
• /
• pp.32-43
• /
• 2023

저항 변화 메모리 소자(RRAM)는 저항 변화 특성을 기반으로 빠른 동작 속도, 간단한 소자 구조 및 고집적 구조의 구현을 통해 많은 양의 데이터를 효율적으로 처리할 수 있는 차세대 메모리 소자로 주목받고 있다. RRAM의 작동원리 중 하나로 알려진 interface type의 저항 변화 특성은 forming process를 수반하지 않고 소자 크기를 조절하여 낮은 전류에서 구동이 가능하다는 장점을 갖는다. 그 중에서도 전이 금속 산화물 기반 RRAM 소자의 경우, 정확한 물질의 조성 조절 방법과 소자의 신뢰성 및 안정성과 같은 메모리 특성을 향상시키기 위해 다양한 연구가 진행 중에 있다. 본 논문에서는 이종 원소의 도핑, 다층 박막의 형성, 화학적 조성 조절 및 표면 처리 등의 방법을 이용하여 interface type 저항 변화 특성의 저하를 방지하고 소자 특성을 향상시키기 위한 다양한 방법을 소개하고자 한다. 이를 통해 향상된 저항 변화 특성을 기반으로 한 고효율 차세대 비휘발성 메모리 소자의 구현 가능성을 제시한다.

• 마이크로전자및패키징학회지
• /
• 제28권3호
• /
• pp.25-32
• /
• 2021

본 논문에서는 X-Band 대역에서 이중 편파 특성을 갖는 Magneto-Electric(ME) dipole 배열안테나를 제안하고, 이를 Low Temperature Co-fired Ceramic (LTCC) 공정을 이용하여 구현 및 측정하였다. 제안된 배열안테나는 LTCC로 구성된 1 × 1 ME dipole 안테나 32 개를 Teflon PCB에 배열하여 8 × 4 배열 안테나로 구성된다. 1 × 1 ME dipole 안테나는 두 쌍의 방사체에서 각각 수직 편파와 수평 편파를 방사하여 이중 편파를 구현하게 된다. 2개의 Port 급전은 LTCC를 이용한 적층 공정을 통해 구현하였으며, 각 각의 Port는 포트 간 격리도를 확보하기 위해 Γ-shaped feeding strip을 통해 독립적으로 방사체에 급전된다. 안테나 배열에 사용된 Teflon PCB는 4층 구조로 형성하였으며, 상단 면과 하단 면을 통해 2개의 Port가 급전된다. 그리고 배열되는 안테나와 Teflon PCB의 임피던스 정합을 위해 Teflon PCB의 전송선로에 λ_g/4 변환기를 적용하였으며 시뮬레이션을 통해 최적 파라미터를 얻었다. 구현된 ME dipole 8 × 4 배열안테나의 크기는 15.5 mm × 11 mm × 4.2 mm이며, Port 1 급전 시 측정된 방사 최대 이득은 18.2 dBi, cross-pol은 1.0 dBi이고 Port 2 급전 시 측정된 방사 최대 이득은 18.1 dBi, Cross-pol은 3.2 dBi로 확인하였다.

• 펄프종이기술
• /
• 제34권4호
• /
• pp.37-43
• /
• 2002

In recent years, numerous studies have been carried out to find out the possible substitution of PE-coated paperboards used in packaging of watery or oily foods. Accordingly, this study was carried out to obtain the basic data for producing higher functional coating agents for pulp mold by evaluating various kinds of synthetic and natural coating agents on the market. Physical properties of coated paperboards were tested. Conclusions obtained from this study were as follows. AKD and PVA showed higher functions than the other synthetic coating agents, while functions of CMC, Com starch and Oxidized starch were higher than those of other natural coating agents. Based on concentrations, AKD 0.5%, PVA 10%, CMC 1.5%, corn starch 6% and oxidized starch 8% were appeared as the proper concentrations. W3 consider that AKD may be suitable for the storage of higher moisture vegetables and other food, and PVA may be suitable for higher oily fried food.

• 유통과학연구
• /
• 제12권5호
• /
• pp.33-40
• /
• 2014

Purpose - This paper aims to review cold chain management, especially in the pharmaceutical industry, to explore the cold chain process of delivering temperature-sensitive pharmaceutical products, and to identify areas for further development. Research design, data, and methodology - The paper, based on literature review and corporate analysis, reviews the development and status of the cold supply chain system, including its important role in the pharmaceutical industry. Results - Logistics in this field requires more stages than are typically needed. Due to the unique characteristics of the market, few companies can provide the services; currently, only few global companies with large networks and high technologies can afford to do so. Expanding pharmaceutical markets to meet global demand will require cold chain development, especially in "pharmerging" markets. Conclusions - Cold chain is a highly sensitive market in terms of products being carried within the chain that itself is a complex system. However, at the same time, it is a niche market with new opportunities. Hence, a sound cold chain infrastructure is needed to satisfy companies, governments, and customers for both commercial and public reasons.

• International Journal of Advanced Culture Technology
• /
• 제9권3호
• /
• pp.305-314
• /
• 2021

Currently, due to COVID-19, household waste has a lot of impact on the environment due to packaging of food delivery. In this paper, we design and implement Faster-RCNN, SSD, and YOLOv4 models for municipal waste detection and classification. The data set explores two types of plastics, which account for a large proportion of household waste, and the types of aluminum cans. To classify the plastic type and the aluminum can type, 1,083 aluminum can types and 1,003 plastic types were studied. In addition, in order to increase the accuracy, we compare and evaluate the loss value and the accuracy value for the detection of municipal waste classification using Faster-RCNN, SDD, and YoloV4 three models. As a final result of this paper, the average precision value of the SSD model is 99.99%, the average precision value of plastics is 97.65%, and the mAP value is 99.78%, which is the best result.

• ETRI Journal
• /
• 제24권4호
• /
• pp.259-269
• /
• 2002

Polymers are emerging as new alternative materials for optical communication devices. We developed two types of polymer-based devices for optical communications. One type is for ultra high-speed signal processing that uses nonlinear optical (NLO) polymers in such devices as electro-optic (EO) Mach-Z${\ddot{e}} $ hnder (MZ) modulators and EO 2${\times}$2 switches. The other is for WDM optical communications that use low-loss optical polymers in such devices as 1${\times}$2, 2${\times}$2, 4-arrayed 2${\times}$2 digital optical switches (DOSs) and 16${\times}$16 arrayed waveguide grating (AWG) routers. For these devices, we synthesized a polyetherimide-disperse red 1 (PEI-DR1) side chain NLO polymer and a low-loss optical polymer known as fluorinated polyaryleneethers (FPAE). This paper presents the details of our development of these polymeric photonic devices considering all aspects from materials to packaging.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.357-357
• /
• 2006

Many industrial sources of proteins can be used as raw materials to produce films, molded materials, and various hollow items either by "casting" techniques or by "thermoplastic processing". Combining proteins with natural fibbers, paper or biodegradable polyesters is very promising to form biodegradable composites witch take advantage of the barrier and mechanical properties of each component. Using nano-fillers to form nanocomposites has also been shown to be interesting to improve properties. Production, with low transformation cost, of protein based materials to form biodegradable materials with controlled functional properties for food uses, medical uses, packaging, agriculture, controlled release systems, etc. is discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1464-1465
• /
• 2008

In this paper, we compared the mechanical characteristics between LTCC-based RF MEMS packaging structures fabricated using two different types of bonding materials; BCB and gold-tin. The BCB-based packages showed an average shear strength of 32.1 MPa and helium leak rate of $1.76{\times}10^{-8}atm{\cdot}cc/sec$ for a cavity volume of $0.45\times10^{-3}cc$, while the packages bonded by gold-tin layer (80 wt.% gold, 20 wt.% tin) showed an average shear strength of 42.70 MPa and helium leak rate $1.38{\times}10^{-8}atm{\cdot}cc/sec$ for a cavity volume of $1.21{\times}10^{-3}cc$.