• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.149-157
• /
• 2006

This paper suggests the design and operation of value stream mapping(VSM) applied to project management, such as R&D, IT Investment. First this study represents design methodology of VSM process using SIPOC(Supplier, Input, Process, Output, Costumer). Second, this paper considers the identification and improvement plan about non-added value time for VSM using FPC(Flow Process Chart) and PERT/CPM. Last, this paper proposes VSM scheduling method using PERT/CPM and CCPM(Critical Chain Project Management)

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.291-305
• /
• 2003

In this work we developed the closed-loop model of a paper machine during grade change with the intention to provide a reliable dynamic model to be used in the model-based grade change control scheme. During the grade change, chemical and physical characteristics of paper process change with time. It is very difficult to represent these characteristics on-line by using physical process models. In this work, the wet circulation part and the drying section were considered as a single process and closed-loop identification technique was used to develop the grade change model. Comparison of the results of numerical simulations with plant operation data demonstrates the effectiveness of the model identified.

• Journal of the Korean Data and Information Science Society
• /
• v.9 no.2
• /
• pp.305-310
• /
• 1998

In this paper, we introduce the conditions that the P-process has the intensity function which it is a standard form of gamma distribution. And we show that the transformed geometric Poisson process which the intensity function is a standard form of gamma distribution is a alternative sign P-process

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.44-51
• /
• 2005

Paper mills use and discharge lots of water. And so now the papermaking industry could be classified into major water consuming industry In order to analyze the process water network and to establish the mass, water balance of duplex board mill, computer aided simulation was made using water pinch method. Based on the pinch analysis results, reuse of process water, after regenerating by microfilter as much as $140\;m^3/hr$, could be suggested without significant accumulation of contaminants in process water. According to this suggestion about $3000\;m^3/day$ of recycled process water could be sub stituted by regenerated water and consequently $30\%$ of energy cost is expected to be reduced.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.42-47
• /
• 2008

For the purpose of reduction of production cost in the industrial papermaking process, the use of waste paper has been more and more increased as a fibrous raw material, and the closed system of white water became closed more than ever. "Scum" indicates the floated sludge by a flotation during primary wastewater treatment process in paper mills. If the scum is used as the raw material, it could reduce both the raw material and solid waste treatment cost with even small quantity. In this study, the element survey and the toxicity measurement was carried out for recycling scum. A load factor of stock preparation process in paper mills was measured by somerville screen. Physical properties of paper sheet containing the accepted scum from the stock of AOCC or KOCC were evaluated. The result of this study shows that recycling scum has potential to be used in paper making system. It also might be able to reduce the required energy used by the pressing or drainage process, the raw material cost, and solid waste treatment cost due to the recycling of scum.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.1
• /
• pp.7-16
• /
• 2003

At present, company has to produce a product that consumer like with a competitive price, a good quality, and a fitting time to supply. Process control and quality control are very important to supply with a product uniformly and inexpensively. Process control is given much weight in the quality control in manufacturing system. Statistical process controls(SPC) that are used in process generally have major impact on manufacturing, product design activities, and process development potentially. Control charts in statistical process control method can be interpreted the data from quality characteristics in production process and discriminated between chance variation and assignable variation in process. In addition, control chart can be used to monitor the process output and detect when changes in the inputs are required to bring the process back to an in-control state. The models that relate the influential inputs to process outputs help determine the nature and magnitude of the adjustments required. In this paper, the characteristic of product quality is monitored by control chart during the machining process and construction of quality control cycle is considered to divide into two types in this case that different assignable causes lead to shifts having different magnitudes. Then we are intended to find a process shift magnitude which has economical quality cost policy and are considered to quality cost functions to find a process shift magnitude. Those costs are categorized into the well-known categories of prevention, appraisal, and internal failure and external failure. This paper ends with numerical examples that demonstrate the usefulness of the model.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.70.3-70
• /
• 2002

This paper presents a procedure of implementing a robust controller for a paper-making plant in DCSs. A paper-making process generally has triple problems to automatically tune its output qualities . Long transport delays which are not able to be simply linearized. The transfer matrix of the process is not square. And every plant model has some uncertainty in low and middle frequency region. To tackle these problems, a multi-input / multi-output (MIMO) plant model having some uncertainty was derived by considering some physical and mechanical principles of the process. Then a MIMO robust-controller is designed and implemented in a real DCS as function block type. Some special co...

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1888-1891
• /
• 2003

In this paper, we proposed a new method to control the length of carbon nano tube in the single CNT probe. A single CNT probe was composed of a tungsten tip made by the electrochemical etching and carbon nano tube which was grown by CVD and prepared through the sonication. The two components were attached with the carbon tape. Since the length of CNT can not be controlled during the manufacturing, the post process is needed to shorten the CNT. In this paper, we proposed the method of electrochemical process. The process was done under the optical microscope and the results were checked by SEM. The diameter of the carbon nano tube used in this paper was about 130nm because the above process had to be done with the optical microscope. Using the method proposed in this paper, we can control the length of the nano tube tip.

• International Journal of Knowledge Content Development & Technology
• /
• v.10 no.2
• /
• pp.7-18
• /
• 2020

Communication is a process involving a group of interrelated elements working together for the purpose of information transfer. This paper discusses information retrieval as a communication process in the 21st century library. The difficulties associated with access to recorded knowledge through bibliographic control devices have been exacerbated by the interposition of additional encoding processes in the library and further decoding by the users. In addition, the innovation of internet/web has revolutionized the means and mode of communication process in the library by flooding information seekers with information and creating an illusion of self-sufficiency in many users. With these changes in information seeking behaviour and pattern, a cybernetic approach to information retrieval has emerged emphasizing adaptive control mechanisms and feedback processes. This paper argues that libraries should strive to continuously remain relevant by keeping abreast with changes in the behavior of information users. To this end, this paper proposes apomediatic-cybernetic model of communication, which illustrates information retrieval processes for the 21st-century library.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.10a
• /
• pp.207-212
• /
• 2005

The SM(System Management) is more important than SI(System Integration) in business model of software industry. And the role of ITO(IT Outsourcing) is increasing, recently. Also, The interest of ITIL increasing in the software industry. In the perspective of business, IT organization has been transformed from supportive division the core business organization, IT organization needs the satisfaction of customer’s requirements. So, process oriented IT management is required. In the perspective of technique, according to need of IT infra for a rapid change management, an application management, systematic development and operating process are required. Therefore, this paper analyzes of IT service core process in service support and service delivery that was offered by ITIL using the AHP methodology This paper shows the results of IT service survey in domestic software industry. And this paper gives a guideline of introduction ITIL