• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1054-1061
• /
• 2007

In this paper, the comparison between UPML and Liao's absorbing boundary condition in the FDTD(Finite-Difference Time-Domain) method was performed for the analysis of the 2D cylindrical coordinate system. Generally, it is known as the absorbing characteristics of the UPML is bro than Liao's absorbing boundary condition in the 2D rectangular coordinate. The simulation results in this paper showed that Liao's original absorbing boundary condition is better than other two absorbing boundary conditions, Liao's modified condition and UPML. We concluded that more numerical, theoretical studies, simulations and verifications for various absorbing boundary conditions will be needed to get more accurate results for the design of useful 2D cylindrical microwave circuits.

• Journal of Technology Innovation
• /
• v.2 no.1
• /
• pp.191-218
• /
• 1994

This paper aims to find out the R&D personnel management strategies which enhance the productivity of researchers. The R&D personnel management practices are examined focusing on career development and compensation scheme. As proxies for higher motivation and/or productivity, job satisfaction and propensity to leave of researchers are analyzed to evaluate the management practices. Using the survey data from researchers in the Korean automobile industry. this paper suggests the management strategies to raise job satisfaction and thus lower propensity to leave of R&D personnel.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1028-1034
• /
• 2011

This paper have been studied that ocean wave power vibration generation system with two D.O.F.(degree of freedom) consists of buoy and vibration generation system with two D.O.F. for using efficiency of ocean wave energy. It selected main frequencies ${\omega}_1$, ${\omega}_2$ in frequency with ocean wave and it fitted them to the natural frequencies of vibration system with two D.O.F. in the vibrational power generation system. Then each the relative velocity of between the winding coil and the permanent magnet is faster than the velocity of ocean wave up and down motion by resonance phenomenon. Also the ocean wave power generation with two D.O.F. obtained the more electric energy then the ocean wave power generation with one D.O.F. by coupling effect for two D.O.F. vibration system. Therefore ocean wave power vibration generation system with two degree of freedom that is proposed in this paper has merits which not only using more energy in the ocean wave but also obtaining more electronic energy.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1195-1207
• /
• 2020

With the development of GeoWeb technology, 2D/3D spatial information services through the web are also has been used increasingly in the application of disaster management. This paper is suggested to construct a web-based 3D geo-spatial information mapping platform to visualize various spatial information collected at the disaster site in a web environment. This paper is presented a web-based geo-spatial information mapping service plan for the various types of 2D/3D spatial data and large-volume LiDAR point cloud data collected at the disaster accident site using HTML5/WebGL, web development standard technology and open source. Firstly, the collected disaster site survey 2D data is constructed as a spatial DB using GeoServer's WMS service and PostGIS provided an open source and rendered in a web environment. Secondly, in order to efficiently render large-capacity 3D point cloud data in a web environment, a Potree algorithm is applied to simplifies point cloud data into 2D tiles using a multi-resolution octree structure. Lastly, OpenLayers3 based 3D web mapping pilot system is developed for web visualization of 2D/3D spatial information by implementing basic and application functions for controlling and measuring 3D maps with Graphic User Interface (GUI). For the further research, it is expected that various 2D survey data and various spatial image information of a disaster site can be used for scientific investigation and analysis of disaster accidents by overlaying and visualizing them on a built web-based 3D geo-spatial information system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.4
• /
• pp.151-154
• /
• 2013

In this paper, we will analyze embedding between Folded Hypercube and HFH. We will show Folded Hypercube $FQ_{2n}$ can be embedded into HFH($C_n,C_n$) with dilation 4, expansion $\frac{(C_n)^2}{2^{2n}}$ and HFH($C_d,C_d$) can be embedded into $FQ_{4d-2}$ with dilation O(d).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.1884-1903
• /
• 2019

Device-to-Device (D2D) communications can provide proximity based services in the future 5G cellular networks. It allows short range communication in a limited area with the advantages of power saving, high data rate and traffic offloading. However, D2D communications may reuse the licensed channels with cellular communications and potentially result in critical interferences to nearby devices. To control the interference and improve network throughput in overlaid D2D cellular networks, a novel channel assignment approach is proposed in this paper. First, we characterize the performance of devices by using Poisson point process model. Then, we convert the throughput maximization problem into an optimal spectrum allocation problem with signal to interference plus noise ratio constraints and solve it, i.e., assigning appropriate fractions of channels to cellular communications and D2D communications. In order to mitigate the interferences between D2D devices, a cluster-based multi-channel assignment algorithm is proposed. The algorithm first cluster D2D communications into clusters to reduce the problem scale. After that, a multi-channel assignment algorithm is proposed to mitigate critical interferences among nearby devices for each D2D cluster individually. The simulation analysis conforms that the proposed algorithm can greatly increase system throughput.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.16-33
• /
• 2019

In this paper, a full-duplex NOMA relaying based underlay device-to-device (D2D) communication scheme is proposed, in which D2D transmitter assists cellular downlink transmission as a full-duplex relay. Specifically, D2D transmitter receives signals from base station and transmits the superposition signals to D2D receiver and cellular user in NOMA scheme simultaneously. Furthermore, we investigate the power allocation under the proposed scheme, aiming to maximize D2D link's achievable transmit rate under cellular link's transmit rate constraint and total power constraint. To tackle the power allocation problem, we first propose a power allocation method based on linear fractional programming. In addition, we derive closed-form expressions of the optimal transmit power for base station and D2D transmitter. Simulation results show that the performance of two solutions matches well and the proposed full-duplex NOMA relaying based underlay D2D communication scheme outperforms existing full-duplex relaying based D2D communication scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.2240-2254
• /
• 2021

We investigate the channel allocation problem in an ultra-dense device-to-device (D2D) enabled cellular network in underlaying mode where multiple D2D users are forced to share the same channel. Two kinds of low complexity solutions, which just require partial channel state information (CSI) exchange, are devised to resolve the combinatorial optimization problem with the quality of service (QoS) guaranteeing. We begin by sorting the cellular users equipment (CUEs) links in sequence in a matric of interference tolerance for ensuring the SINR requirement. Moreover, the interference quota of CUEs is regarded as one kind of communication resource. Multiple D2D candidates compete for the interference quota to establish spectrum sharing links. Then base station calculates the occupation of interference quota by D2D users with partial CSI such as the interference channel gain of D2D users and the channel gain of D2D themselves, and carries out the channel allocation by setting different access priorities distribution. In this paper, we proposed two novel fast matching algorithms utilize partial information rather than global CSI exchanging, which reduce the computation complexity. Numerical results reveal that, our proposed algorithms achieve outstanding performance than the contrast algorithms including Hungarian algorithm in terms of throughput, fairness and access rate. Specifically, the performance of our proposed channel allocation algorithm is more superior in ultra-dense D2D scenarios.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1547-1556
• /
• 2014

In this paper, we propose cost-effective device-to-device (D2D) advertisement scenario with properties of proximity and timeliness through the convergence of D2D communications and social commerce service. We numerically analyze advertisement dissemination effect of the proposed scenario according to the number of sectors, and demonstrate the performance of the normalized D2D coverage, the average number of D2D users, and the average D2D coverage per user via intensive simulations. We verify the accuracy of the results for our numerical analysis compared with the simulation results.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.455-456
• /
• 2006

This paper presents an automatic pose-normalized 3D face data acquisition method using 2D and 3D information. We propose an automatic pose-normalized 3D face acquisition method that accomplishes 3D face modeling and 3D face pose-normalization at once. The proposed method uses 2D information with AAM (Active Appearance Model) and 3D information with 3D normal vector. The 3D face modeling system consists of 2 cameras and 1 projector. In order to verify proposed pose-normalized 3D modeling method, we made an experiment for 2.5D face recognition. The experimental result shows that proposed method is robust against pose variation.