• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.91-98
• /
• 2006

Supernumerary teeth are teeth which result from the continued budding of the enamel organ of the preceding tooth or from excessive proliferation of cells. They are most often found in the maxillary anterior region. And they can be responsible for a variey of irregularities in the primary and transitional dentition. There are two morphological types of supernumerary teeth, supplemental and rudimentary. Supplemental teeth have normal shape and size. In contrast, rudimental teeth have abnormal shape and smaller size. Supplemental supernumerary teeth are most common in permanent lateral incisor area. Its extraction must be decided more carefully with differential diagnosis between normal teeth, because it has normal shape and size. We reports 3 cases of the normal incisor shaped teeth in the maxillary anterior region. In all cases, we used the 3D Dental-CT as well as the conventional plain film such as periapical, occlusal, and panoramic radiograph. Consequently, 3B Dental-CT was valualble to figure out the exact position and morphology of supernumerary teeth, to do more conservative surgery and to reduce surgery stress and time.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.2
• /
• pp.144-150
• /
• 2015

Early treatment is recommended for class III malocclusion in the primary dentition, though it is difficult to diagnose correctly. It was recommended dental maturation can possibly be used to make a differential diagnosis of skeletal class III malocclusion. This study aimed to compare dental maturation of first molars in children with skeletal or non-skeletal class III malocclusion in the primary dentition and to determine if dental maturation could be used to make a differential diagnosis of class III malocclusion. Among the children visiting the department of pediatric dentistry in Pusan National University Dental Hospital for anterior crossbite in the primary dentition, 18 were categorized into the non-skeletal class III malocclusion and 34 into the skeletal class III malocclusion. Panoramic radiographs were used to make comparative analysis of dental age and the eruption rate of the first molars. The following results were obtained. No difference was found between chronologic and dental age by the skeletal features or gender, with the latter being older than the former (p < 0.05). The discrepancies in eruption rate of first molars were significantly different between skeletal (18.91%) and non-skeletal groups (16.53%) (p < 0.05). This result implies that maturation of the first molars might be used to make a differential diagnosis of class III malocclusion.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.3
• /
• pp.241-246
• /
• 2014

The purpose of this study was to find out prevalence of peg-laterals and to evaluate the frequency of dental anomalies in Korean children with peg-laterals. For this study, panoramic radiographs of 3,278 patients (aged 7 to 15 years) from the Department of Pediatric Dentistry admitted from January, 2008 to January, 2013 were selected for an investigation on peg-laterals distribution. The prevalence of peg-laterals was 2.62% (86 subjects). Among the peg-laterals children, the distribution of associated dental anomalies were as follows: congenitally missing teeth (29.1%), dens invaginatus (19.8%), impacted teeth (12.8%), supernumerary teeth (9.3%), and transposition (4.7%). Due to this study showing frequent occurrences of peg-laterals with other dental anomalies, one suggestion is to consider such relationships before deciding on a diagnosis and treatment plan.

• The Journal of the Korean dental association
• /
• v.55 no.11
• /
• pp.756-765
• /
• 2017

Purpose: The purpose of this article is to evaluate a change o bone level on the sinus floor by a bone added osteotome sinus floor elevation (BAOSFE) technique, according to the amount of deproteinized bovine bone mineral (DBBM). And Changes in augmented bone height after BAOSFE procedure were also assessed for 6 months after the implant procedure. Materials and Methods: Forty eight single implants were placed in the posterior maxilla using BAOSFE technique. The implantation sites were classified into two groups according to the amount of grafted DBBM, 0.25 group (0.25g) and 0.5 group (0.5 g). Panoramic views or cone-beam computed tomography (CBCT) were taken at the time of implant placement with BAOSFE and after at least 6 months to assess the bone level changes in the elevated sites with DBBM. Results: Alveolar bone level around all implants was stable clinically and radiographically during the follow-up. Mean augmented bone height was $5.21{\pm}0.94mm$ in 0.25 group and $6.92{\pm}1.19mm$ in 0.5 group. Statistically significant difference in augmented bone height was found in the comparison between the 0.25 group and 0.5 group at the time of surgery. There was a positive correlation between the length of the implant protruding into the maxillary sinus and the augmented bone height. After 6 months, mean reduction of augmented bone height was $0.50{\pm}0.34mm$ in 0.25 group and $0.41{\pm}0.30mm$ in 0.5group. There was no specific correlation between the reduction of augmented bone height and amount of grafted DBBM. Conclusion: Within the limit of this study, the amount of grafting materials and the protrusion length of implant into the maxillary sinus affect the amount of the augmented bone height.

• The korean journal of orthodontics
• /
• v.41 no.5
• /
• pp.346-353
• /
• 2011

Objective: The purpose of this study was to investigate the prevalence of dental anomalies in outpatient clinics. Methods: The subjects of this study were 3,133 patients who visited the clinic between January 2009 and June 2011. The dental records and panoramic films of the patients and detection of supernumerary, missing, and impacted teeth, transposition, and peg lateralis were reviewed. The results were analyzed according to gender and types and locations of dental anomalies. Results: Among the patients, 362 had dental anomalies, with a prevalence rate of 11.55%. Congenital missing teeth (5.71%) ranked first in the categories, and impacted teeth (3.09%) ranked second. The percentage of patients having supernumerary teeth, peg lateralis, and dislocated teeth were 1.79%, 1.66%, and 0.45%, respectively. Conclusions: Congenital missing teeth and impacted teeth are, respectively, the first and second most common dental anomalies in Korean dental patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.3
• /
• pp.191-196
• /
• 2020

Objectives: Beyond the original application approved by the U.S. Food and Drug Administration, recombinant human bone morphogenetic protein-2 (rhBMP-2) is used for medication-related osteonecrosis of the jaw (MRONJ) treatment because of its bone remodeling enhancement properties. The purpose of the study was to investigate the bone formation effect of rhBMP-2/absorbable collagen sponge (ACS) in patients with MRONJ. Materials and Methods: In this retrospective cohort study, 26 female patients diagnosed with MRONJ and who underwent mandibular sequestrectomy at Ajou University Dental Hospital from 2010 to 2018 were included. The experimental group was composed of 18 patients who received rhBMP-2/ACS after sequestrectomy, while the control group was composed of 8 patients who did not receive rhBMP-2/ACS after sequestrectomy. A total dose of 0.5 mg of rhBMP-2 was used in the experimental group at a concentration of 0.5 mg/mL. Follow-up panoramic X-rays were taken immediately after the surgery and more than 6 months after the surgery. Using those X-rays, a radiographic index of bone defect area was calculated using the modified Ihan Hren method, which measures radiographic density of the normal bone and the defect site. Results: This study suggests that rhBMP-2 contributes to new bone formation. The mean radiographic index immediately after surgery and more than 6 months after the surgery for the experimental group was 68.4% and 79.8%, respectively. The mean radiographic index immediately after surgery and more than 6 months after the surgery for the control group was 73.4% and 76.7%, respectively (Wilcoxon signed rank test, P>0.05). The mean radiographic index increased 11.4% in the experimental group and 3.27% in the control group (Mann-Whitney U-test, P<0.05). Conclusion: Based on the results, use of rhBMP-2/ACS on bone defect sites after sequestrectomy could be a successful strategy for treatment of MRONJ patients.

• Journal of Periodontal and Implant Science
• /
• v.37 no.2
• /
• pp.277-286
• /
• 2007

The edentulous posterior maxilla generally provides a limited amount of bone height because of atrophy of the ridge and pneumatization of the maxillary sinus, Maxillary sinus augmentation is one of the surgical techniques for reconstruction of the severely resorbed posterior maxilla. The purpose of this study was to evaluate the survival rate of implants and the long-term changes of graft height after maxillary sinus augmentation by lateral window approach. From September 1996 to July 2004, maxillary sinus augmentation with mixed grafts of autograft, allograft, xenograft and alloplast were performed on 45 patients and 100 implants were placed. We evaluated the survival rate of implants and the changes of BL(bone length)/IL(implant length) according to time using panoramic radiographs. The survival rate of implants was 91.0% for follow-up period. The mean reduction of graft heights was 0.34mm(3.0%) for 6 months and 1.22mm(1O.66%) for 3 years after augmentation. The total mean BL/IL was $1.34{\pm}0.21$ during 5 year observation period after augmentation and decreased slightly over time. The result means that graft materials were stable above the implant apex. BL/ILs of 1stage procedure were significantly decreased at 1-2 year, 3-4 year after augmentation and no statistically significant changes were observed in those of 2 stage procedure. The graft materials of both procedures were stable above the implant apex. No statistically significant changes of BL/IL were observed in the grafts combined with low amount of autogenous bone or without autogenous bone. The graft materials of both groups were stable above the implant apex. The results indicated that the placement of dental implants with maxillary sinus augmentation showed predictable clinical results and the grafts combined with low amount of autogenous bone or without autogenous bone had long-term resistance to resorption in maxillary sinus.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.225-233
• /
• 1998

The purpose of this study was to determine the thickness of the cortical bone at the mandibular angle in children and adolescents. The subjects were composed of 153 subjects who were 3 to 17 years of age that had not been history of bone disease or metabolic disease and no dental caries or tooth loss on mandibular molars. The subjects were divided into three age groups, group I (preschool children) was 3 to 5 years of age and grouop II (school children) was 6 to 11 years of age and group III (adolescence) was 12 to 17 years of age. Panoramic radiographs of these patients were collected and measurements of the thickness of the cortical bone were obtained at the mandibular angle. The average thickness of the cortical bone in the group I was 1.01$\pm$0.18 mm in boys and 1.07$\pm$0.22 mm in girls. In the group II was 1.23$\pm$0.18 mm in boys and 1.32$\pm$0.18 mm in girls. In the group III was 1.60$\pm$0.23 mm in boys and 1.58$\pm$0.20 mm in girls. Statistical analyses did not reveal any significant difference between the right or left side of the mandible but difference was exist between the same age groups by sex, especially in group II (p<0.01), except in group III. The greater thickness of cortical bone in the older age group was shown to be statistically significant. The correlation coefficient between age and the thickness of the cortical bone at the mandibular angle showed a high value of r=0.76.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.57-64
• /
• 2010

The purpose of this investigation was to study the relationship between vertical facial pattern and dental maturation in children in pubertal and pre-pubertal periods. The material consisted of lateral head films and panoramic radiographs of 1306 patients. The subjects were selected according to Ricketts's VERT index and other including criteria. These subjects were divided by VERT index to brachyfacial group and dolichofacial group. In each selected subject, dental age was determined according to Demirjian's dental maturity score. All subjects were distributed according to age, vertical facial type and sex, mean and standard deviation of chronological age, dental age and age difference were determined in each group. And the data were analysed to find the difference of tooth maturation by facial pattern. Findings of this study include: 1. In all groups, dental age was determined higher than chronological age in statistically significant level. 2. Compared by vertical facial pattern, in pubertal age groups, it seems that subjects with brachyfacial type presented the tendency to have an advanced dental maturation, only in female group. 3. Compared by pubertal period, brachyfacial groups presented more advanced dental maturation in pubertal groups than pre-pubertal groups.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.1
• /
• pp.1-11
• /
• 2015

Researchers have developed virtual reality environments to provide audience with more visually immersive experiences than previously possible. One of the most popular solutions to build the immersive VR space is a multi-projection technique. However, utilization of multiple projectors requires large spaces, expensive cost, and accurate geometry calibration among projectors. This paper presents a novel omnidirectional projection system with a single projector and a single spherical mirror.We newly designed the simple and intuitive calibration system to define the shape of environment and the relative position of mirror/projector. For successful image projection, our optimized omnidirectional image generation step solves image distortion produced by the spherical mirror and a calibration problem produced by unknown parameters such as the shape of environment and the relative position between the mirror and the projector. Additionally, the focus correction is performed to improve the quality of the projection. The experiment results show that our method can generate the optimized image given a normal panoramic image for omnidirectional projection in a rectangular space.