• Rapid Communication in Photoscience
• /
• v.2 no.3
• /
• pp.68-71
• /
• 2013

Acetone sensitized photoadditions of isopropanol to (5R)-5-menthyloxy-2-(5H)-furanone were investigated in two different microflow reactor systems. Setup A employed a commercially available glass reactor under a UVB-panel. Setup B utilized a FEP microcapillary wrapped tightly around a Pyrex cylinder with a single UVB fluorescent tube at its center. The reactions under flow conditions were subsequently compared to analogue reactions conducted in a batch chamber reactor. Overall, the microflow systems gave faster conversions and higher isolated yields. The flexible microcapillary setup, however, showed the best performance and promise in terms of future scale-up and reactor optimization.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.10 s.253
• /
• pp.1209-1218
• /
• 2006

Precision servomechanisms are widely used in machine tool, semiconductor and flat panel display industries. It is important to improve contouring accuracy in high-precision servomechanisms. In order to improve the contouring accuracy, cross-coupled control systems have been proposed. However, it is very difficult to select the controller parameters because cross-coupled control systems are multivariable, nonlinear and time-varying systems. In this paper, in order to improve contouring accuracy of a biaxial servomechanism, a cross-coupled controller is adopted and an optimal tuning procedure based on an integrated design concept is proposed. Strict mathematical modeling and identification process of a servomechanism are performed. An optimal tuning problem is formulated as a nonlinear constrained optimization problem including the relevant controller parameters of the servomechanism. The objective of the optimal tuning procedure is to minimize both the contour error and the settling time while satisfying constraints such as the relative stability and maximum overshoot conditions, etc. The effectiveness of the proposed optimal tuning procedure is verified through experiments.

• Journal of Distribution Science
• /
• v.11 no.1
• /
• pp.15-23
• /
• 2013

Purpose - During a reform period lasting 30 years, the Blue Economic Zone (BEZ) in the Shandong Peninsula has made progress in attracting foreign investment, and has acquired the foreign direct investment (FDI) essential for economic growth. It is therefore important to conduct a proactive and systematic study of FDI in the BEZ. Research design, data, methodology - This dissertation discusses the contribution of FDI on economic growth, from both a theoretical and empirical perspective. Taking seven core cities for study, statistics and econometrics are used, and panel data are used to validate FDI contribution to import and export in the BEZ. Results- FDI was found to exert both positive and negative influences on the imports and exports of the BEZ. In other words, the research findings are consistent with Trade Generated and Inverse Trade Generated theories put forward by Kojima and Mundell, among other researchers mentioned earlier in this paper. Further, FDI has greatly increased imports and exports for the BEZ. Conclusions - According to the results of this empirical study on local investment environment optimization, FDI plays an important role in foreign trade. This dissertation puts forward recommendations on using FDI to better promote economic growth in the BEZ.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.569-570
• /
• 2006

Effects of the evaporation rate of MgO films using electron beam were investigated on the MgO properties and the discharge characteristics of the plasma display panel (PDP). The evaporation rate was changed from $3{\AA}$/sec to $15{\AA}$/sec at a substrate temperature of $300^{\circ}C$. MgO properties such as crystal orientation, surface roughness, contact angle, and film structure were inspected using XPS, AFM, drop shape analysis and SEM. We also studied the relation between MgO properties and PDP discharging characteristics. The minimum firing voltage and maximum efficacy were obtained at evaporation rate of $5{\AA}$/sec. In the MgO film deposited at $5{\AA}$/sec, (200) orientation was most intensive and surface roughness was minimum.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.2 s.257
• /
• pp.245-252
• /
• 2007

Since the new millennium, truss PCMs(Periodic Cellular Metals) have drawn attention because of their superior specific stiffness, strength and multi-functionality. Prior studies have focused on the structural design and optimization. Kagome truss PCM has been proved to have the higher resistance to plastic buckling, more plastic deformation energy and lower anisotropy than other truss PCMs. In this study, we introduce a new idea to fabricate multi-layered Kagome truss PCM from continuous wires which can gain high strength as in piano wires and can be controlled to be defect free owing to drawing process. The relative density, the stiffness and the strength under bending and compressive load are estimated through elementary mechanics and compared with the results from experiments and FEA. The failure mechanisms are analyzed, and also mechanical performance and production are discussed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.2
• /
• pp.93-97
• /
• 2010

In this study, cationic guar polymer was selected from many cationic polymers currently using in shampoo and then was newly developed having 0.7 % above of nitrogen content and 190~200 cps of viscosity through various performance measurements. Wet combing ability, polymer substantivity, silicone deposition and panel test were evaluated for performance measurements. Cationic guar polymer that was invented from this study can optimize conditioning effects in shampoo.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.2134-2143
• /
• 2018

This work introduces a fault diagnosis method for transformer based on self-powered radio frequency identification (RFID) sensor tag and improved Hilbert-Huang transform (HHT). Consisted by RFID tag chip, power management circuit, MCU and accelerometer, the developed RFID sensor tag is used to acquire and wirelessly transmit the vibration signal. A customized power management including solar panel, low dropout (LDO) voltage regulator, supercapacitor and corresponding charging circuit is presented to guarantee constant DC power for the sensor tag. An improved band restricted empirical mode decomposition (BREMD) which is optimized by quantum-behaved particle swarm optimization (QPSO) algorithm is proposed to deal with the raw vibration signal. Compared with traditional methods, this improved BREMD method shows great superiority in reducing mode aliasing. Then, a promising fault diagnosis approach on the basis of Hilbert marginal spectrum variations is brought up. The measured results show that the presented power management circuit can generate 2.5V DC voltage for the rest of the sensor tag. The developed sensor tag can achieve a reliable communication distance of 17.8m in the test environment. Furthermore, the measurement results indicate the promising performance of fault diagnosis for transformer.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.3
• /
• pp.25-38
• /
• 2020

The purpose of this study is constructing a regional-level crop acreage choice model incorporating the impacts of producer risk aversion, and applying the constructed model to the Korean policy that promotes rice paddy conversion into non-rice crop fields. The study adopts the approach of Paris (2018) which estimates the absolute risk aversion coefficient inside of a positive mathematical programming model. A panel data set of 143 cities/counties is used for the empirical study where agricultural land in each region is allocated to 8 crops. Our estimated absolute risk aversion coefficients are smaller than those of Paris (2018), but are a little bit larger than those of the existing Korea studies based on survey or econometric methods. We found that there are close relationships among the estimated risk aversion, regional characteristics, and farming patterns. We also found that incorporating the estimated risk attitudes results in substantial differences in the impacts of the rice paddy conversion policy.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.2
• /
• pp.189-195
• /
• 2015

Failure of the functions involved in ingestion leads to, not only loss of enjoyment of eating, but also protein-energy malnutrition. Dysmasesis and difficulty of swallowing occurs in various diseases, but aging is a major cause. In the aging society, the proportion of elderly people with dysmasesis and difficulty of swallowing is expected to increase rapidly. Developing foods for the elderly that are easy to chew and swallow is thus required. This study was conducted to develop easily chewable and swallowable foods for the elderly who can crush foods and ingest with their own tongues, but occasionally have difficulty in drinking fluids such as water and tea. Various foods for the elderly with chewing and swallowing difficulties were used for sensory assessment. The sensory panel consisted of 10 dietitians (10 women) in nursing care facilities. The sensory optimal composite recipes were determined by central composite design (CCD). The sensory measurements were significantly different in saltiness (p<0.05), sweetness (p<0.05), and overall quality (p<0.05). The optimum formulation of stir fried anchovy calculated by numerical and graphical methods was 3.74 g of soy sauces and 30.17 g of oligo-saccharides. Stir fried anchovy had a moisture content, hardness and adhesiveness of 76.52%, 2.10, and -1.57, respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.10-16
• /
• 2018

In silicon crystalline PV (Photo Voltaic) industry, PV module or panel electric power is directly related to the companies' profit. Thus, many PV companies have invested and focused on R&D activities to get the higher module power. The main BOM (Bills of Material) on the module consists of PV solar cell, ribbon, EVA (Ethylene-Vinyl Acetate copolymer), glass and back sheet. Based on consistent research efforts on enhancing module power using BOM, there have been increase of around 5 watt per module every year as results. However, there are lack of studies related to enhancing accuracy of measurement. In this study, the enhancing on the metrology is investigated and the improvement shows actually contribution to company's profit. Especially, the measurement issues related to heat and to quasi state of bandgap diagram by EL(Electro Luminescence) are described in this study.