• Wind and Structures
• /
• v.13 no.2
• /
• pp.145-167
• /
• 2010

By using the 'failure' model approach, the effects of wind direction on the flight of sheathing panels from the roof of a model house in extreme winds was investigated. A complex relationship between the initial conditions, failure velocities, flight trajectories and speeds was observed. It was found that the local flow field above the roof and in the wake of the house have important effects on the flight of the panels. For example, when the initial panel location is oblique to the wind direction and in the region of separated flow near the roof edge, the panels do not fly from the roof since the resultant aerodynamic forces are small, even though the pressure coefficients at failure are high. For panels that do fly, wake effects from the building are a source of significant variation of flight trajectories and speeds. It was observed that the horizontal velocities of the panels span a range of about 20% - 95% of the roof height gust speed at failure. Numerical calculations assuming uniform, smooth flow appear to be useful for determining panel speeds; in particular, using the mean roof height, 3 sec gust speed provides a useful upper bound for determining panel speeds for the configuration examined. However, there are significant challenges for estimating trajectories using this method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.3
• /
• pp.122-128
• /
• 2014

When evaluating effectiveness of a program, there is a tendency to simply compare the performances of the treated before and after the program or to compare the differences in the performances of the treated and the untreated before-after the program. However, these ways of evaluating effectiveness have problems because they can't account for environmental changes affecting the treated and/or effects coming from the differences between the treated and the untreated. Therefore, in this paper, panel data analysis (fixed effects model) is suggested as a means to overcome these problems and is utilized to evaluate the effectiveness of fusion technology program conducted by Ministry of Trade, Industry and Energy, Korea. As a result, it turns out that the program has definitely positive impacts on the beneficiary in terms of sales, R&D expenditure, and employment.

• Journal of Environmental Science International
• /
• v.22 no.9
• /
• pp.1171-1180
• /
• 2013

Recent climate change has led to fluctuations in agricultural production, and as a result national food supply has become an important strategic factor in economic policy. As such, in this study, panel data was collected to analyze the effects of seven meteorological elements and using the Lagrange multipliers method, the fixed-effects model for the production of five types of food crop and the seven meteorological elements were analyzed. Results showed that the key factors effecting increases in production of rice grains were average temperature, average relative humidity and average ground surface temperature, while wheat and barley were found to have positive correlations with average temperature and average humidity. The implications of this study are as follow. First, it was confirmed that the meteorological elements have profound effects on the production of food crops. Second, when compared to existing studies, the study was not limited to one food crop but encompassed all five types, and went beyond other studies that were limited to temperature and rainfall to include various meterological elements.

• Journal of Preventive Medicine and Public Health
• /
• v.48 no.6
• /
• pp.319-329
• /
• 2015

Objectives: Parental socioeconomic status (SES) exerts a substantial influence on children's health. The purpose of this study was to examine factors determining children's private health insurance (PHI) enrolment and children's healthcare utilization according to PHI coverage. Methods: Korea Health Panel data from 2011 (n=3085) was used to explore the factors determining PHI enrolment in children younger than 15 years of age. A logit model contained health status and SES variables for both children and parents. A fixed effects model identified factors influencing healthcare utilization in children aged 10 years or younger, using 2008 to 2011 panel data (n=9084). Results: The factors determining children's PHI enrolment included children's age and sex and parents' educational status, employment status, and household income quintile. PHI exerted a significant effect on outpatient cost, inpatient cost, and number of admissions. Number of outpatient visits and total length of stay were not affected by PHI status. The interaction between PHI and age group increased outpatient cost significantly. Conclusions: Children's PHI enrolment was influenced by parents' SES, while healthcare utilization was affected by health and disability status. Therefore, the results of this study suggest disparities in healthcare utilization according to PHI enrollment.

• Steel and Composite Structures
• /
• v.26 no.3
• /
• pp.255-263
• /
• 2018

A steel-concrete composite (SC) panel typically consists of two steel faceplates and a plain concrete core. This paper investigated the impact response of SC panels through drop hammer tests and numerical simulations. The influence of the drop height, faceplate thickness, and axial compressive preload was studied. Experimental results showed that the deformation of SC panels under impact consists of local indentation and overall bending. The resistance of the panel significantly decreased after the local failure occurred. A three-dimensional finite element model was established to simulate the response of SC panels under low-velocity impact, in which the axial preload could be considered reasonably. The predicted displacements and impact force were in good agreement with the experimental results. Based on the validated model, a parametric study was conducted to further discuss the effect of the axial compressive preload.

• Journal of Sensor Science and Technology
• /
• v.26 no.4
• /
• pp.274-279
• /
• 2017

LCD(Liquid Crystal Display) panel cutting problem is a sort of two dimensional cutting stock problem. A cutting stock problem is problem that it minimizes the loss of the stock when a stock is cut into various parts. In the most research of the two dimensional cutting stock problem, it is supposed that the relative angle of a stock and parts is not important. Usually the angle is regarded as horizontal or perpendicular. In the manufacturing of polarizing film of LCD, the relative angle should be maintained at some specific angle because of the physical and/or chemical characteristics of raw material. We propose a mathematical model for solving this problem, a two-dimensional non-Guillotine cutting stock problem that is restricted by an arranged angle. Some example problems are solved by the C++ program using ILOG CPLEX classes. We could get the verification and validation of the suggested model based on the solutions.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.5
• /
• pp.314-323
• /
• 2013

Production simulation technology is beneficial to solve the complicated and fluctuated problems in a shipyard. It takes too much time and effort to build simulation models in the field, though. This research proposes a feasible method to reduce the difficulties related to simulation modeling for the factory or shop capacity analysis. In addition, a proposed neutral data format for production information is efficient to manage information acquisition for simulation modeling automation. A panel block shop model is contributed to comparison between the conventional technique and the automated one. The automation technique is highly recommended to run a rapid simulation in the shipyard problem.

• Journal of Family Resource Management and Policy Review
• /
• v.18 no.2
• /
• pp.163-182
• /
• 2014

This study examined the effects of informal grandparent-provided child care and support on married women's additional birth plans. This study applied panel data analysis to three waves of the Korean Longitudinal Survey of Women and Family (KLoWF) and obtained two major findings, as follows. First, having a mother-in-law and co-residing with parents-in-law had a positive influence on married working women's additional birth plans. Child care provision from the parents of a married working woman also positively influenced her additional birth plans. Second, the analysis showed that housework assistance from a woman's mother-in-law or mother had no effect on her birth plans in both models investigated: the additional birth plan model for all women, both employed and unemployed, and the additional birth plan model for only working women. In conclusion, the findings of this study demonstrated that child care availability, with grandparents as the trusted providers, is a more important factor in married women's additional birth plans than housework assistance from their mothers-in-law and mothers.

• Survey Research
• /
• v.11 no.1
• /
• pp.43-61
• /
• 2010

This research estimated the variation of high school students' academic achievement by using the second to the fourth wave KEEP(Korea Education and Employment Panel) data. We explored the effects of study on academic achievement in proportion to self-regulated learning hours(except for school work and private tutoring). Analysis variables were self-directed learning(study) hours throughout senior high school and 9 grade academic achievement. We conducted Latent Growth Model(LGM) using KEEP panel data and program LISREL 8.8. Results showed that there were significant effects of self-regulated learning hours on the variation of senior high school students' academic achievement. Therefore, this was considered to be useful tips in getting the relation between students' learning and academic achievement.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.106-115
• /
• 2007

In this study, first, child headform model was built up, satisfying requirement in the headform validation test. Also, for decreasing both acceleration peak and deformation, a new hood with dome shaped forming in inner panel was investigated. Next, headform impact, complying with draft of EEVC W/G 17, on the central portion of the newly proposed hood were simulated for a steel hood and three aluminum hoods with different thickness for examining the material and thickness effect on HIC value and inner panel deformation. The analysis results explained that aluminum hoods with dome shaped forming in inner panel were highly promising not only for meeting headform safety regulations but also for leading to weight savings. Finally, hood edge design technology in order to reduce pedestrian injury due to the high stiffness of beam type edge and the rigid support, was discussed. Various types of the foam filled edge were designed and their headform safety performance were evaluated. The edge structure with foam filled in upper one third of section exhibited excellent results.