• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.106-106
• /
• 2000

This study is to embody automatic inspection system of motor body panel by visual system. since it is inefficient to examine the adhesion condition of components with the naked eye, picture processing algorithm is presented to replace the existing manual inspection process with an automatic inspection process. The developed automatic inspection system presents the examination method of the adhesion condition of components with a ixed camera, which leads to an increase of the productivity and a reduction of manufacturing cost.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.126-131
• /
• 2004

The popularity of flat-panel display(FPD), including plasma display panel(PDP) and liquid-crystal display(LCD), has given rise to the need to streamline their production. In these days, PDP is one of the most popular display devices because of its expansion of manufacturing process and simplicity. Bus electrodes, sustain electrodes, barrier ribs and RGB phosphors are patterned on PDP panel to display an image. Since a minute damage on the pattern can cause a serious defect to display, it is important to inspect the pattern precisely. In this paper, an automatic inspection system of repeated pattern in PDP panel has been introduced to find the defect, such as open, short, dirt, island, and so on. And the inspection system has been operated in the mass production line of PDP.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.4 s.193
• /
• pp.7-14
• /
• 2007

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.14-20
• /
• 2020

In OLED panel production process, it is necessary to cut a part of protective film as a preprocess for lighting inspection. The current method is to recognize only the fiducial mark of the cut-out panel. Bare Glass Cutting does not compensate for machining cumulative tolerances. Even though process defects still occur, it is necessary to develop technology to solve this problem because only the Align Mark of the panel that has already been cut is used as the reference point for alignment. There is a lot of defective lighting during panel lighting test because the correct protective film is not cut on the panel power and signal application pad position. In laser cutting process to remove the polarizing film / protective film / TSP film of OLED panel, laser processing is not performed immediately after the panel alignment based on the alignment mark only. Therefore, in this paper, we performed real time inspection which minimizes the mechanism tolerance by correcting the laser cutting path of the protective film in real time using Machine Vision. We have studied calibration algorithm of Vision Software coordinate system and real image coordinate system to minimize inspection resolution and position detection error and edge detection algorithm to accurately measure edge of panel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.709-714
• /
• 2017

The curved panel is widely used for display of TVs and smart phones. This paper proposes a new auto-focusing method for curved panel inspection system. Since the distance between the camera and the panel varies with the curve position, the camera should change its focus at every inspection time. In order to reduce the focusing time, we propose an effective focusing method that considers the mathematical model of panel curve. The Lagrange polynomial equation is applied to modeling the panel curve. The foci of initial three points are used to get the curve equation, and the other foci are calculated automatically from the curve equation. The experiment result shows that the proposed method can reduce the focusing time.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.51-56
• /
• 2000

This study is to implement automatic inspection system of motor body panel by visual system. since it is inefficient to examine adhesion condition of components with the naked eye, image processing algorithm is presented to replace the existing manual inspection process with an automatic inspection process the developed automatic inspection system presents tile examination method of the adhesion condition of components with a pixed camera, which leads to an increase of the productivity and a reduction of manufacturing cost

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.21-27
• /
• 2020

Recently, LCD (Liquid Crystal Display) has been replaced by OLDE (Organic Light Emitting Diode) in high resolution display industry. In the process of OLDE production, it inspects defective products by sending a signal using a probe during OLED panel inspection. At this time, the cause of the detection of failure is divided into two. One is the self-defect of the OLED panel and the other is the poor contact occurring in the process of contact between the two. The second case is unknown at the time of testing, which increases the time for retesting. To this end, we made a system that can identify in real time whether the probe is in contact during the inspection. A contact probe unit was designed for the system, and a stage system was implemented. An inspection system was constructed through S / W and circuit configuration for actual inspection. Finally, a system that can check contact and non-contact in real time was constructed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.158.6-158
• /
• 2001

A band function model paired comparison(BMPC) method is a kind of paired comparison methods. Considering that human has ambiguity, the BMPC method uses a monotonous increase function with the width as the human judgment characteristic. Since panel´s judgments do not always have enough response, it is very important to examine inspection abilities of each panel. In this study. We focus on the difference of band functions in each panel, which is the characteristic function of judgment in the BMPC method, and examine the method of obtaining panels inspection abilities. Three kinds of evaluation functions, "the dispersion of judgments", "the resolution", and "the difference of the judgments" are defined from Panel´s characteristic function of ...

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.118-121
• /
• 2002

In this study, we describe the development of viscous inspection equipment for flatron panel glass by Moire phenomenon and propose a new idea to develop an automatic inspection system for viscous or cord defects. It is possible to detect string viscous more easily and the equipment is practically being applied in production line. After using this equipment, the ratio of defective from customer is dropped significantly.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.283-289
• /
• 2004

The number of pixel defects including bright and black dots on a panel is one of the critical factors determining the quality of TFT-LCD. Since pixel defects on the TFT-LCD panels are sometimes unavoidable, manufacturers have to inspect the panels so that any panel with an unacceptable number of defects will not be delivered to the buyers. However, the buyers demand for the manufacturers to meet different pixel defects tolerances (acceptable number of pixel defects on a TFT-LCD panel) around central(tight) and peripheral(loose) inspection zones. The disagreement in quality standard among different buyers also cause confusions in screening non-confirmative products and unstable yield of production. Few research has focused on the effects of defect locations on a TFT-LCD panel on their detection probabilities and the rational division of defect inspection zones. In this research, experiments were conducted to find the detection probabilities of black dot defects with respect to their varying locations on a TFT-LCD. It is proposed a rational division of inspection zone on a TFT-LCD panel on the basis of detection probabilities of the defects. With these division of inspection zones and the mean defect detection probability within each zone, it is expected to establish a more reasonable pixel defects tolerances.