• 무역학회지
• /
• 제41권4호
• /
• pp.91-110
• /
• 2016

본 연구는 AEO 인증이 기업성과에 긍정적인 영향을 미칠 수 있을 것이며, 이로 인해 우리나라 기업이 국제경쟁력을 갖추기 위한 방안을 제시하기 위해 AEO 인증이 기업성과에 미치는 영향을 패널데이터를 이용하여 분석하였다. 변수간 내생성의 문제를 해결하는데 효율적인 Hausman-Taylor 추정법을 사용하여 AEO 인증이 기업성과에 미치는 영향을 분석한 결과, AEO 인증은 기업성과를 대표하는 주요 변수인 기업의 국내 매출액과 해외 매출액에 긍정적인 영향을 미치며, 특히 AEO 인증의 직접적인 혜택과 업무 프로세스 개선은 수출입 물류흐름을 향상시켜 매출액 증대에 긍정적인 영향을 미치는 것으로 나타났다. 결론적으로 본 연구는 AEO 인증이 기업성과에 미치는 영향을 보다 효율적인 패널데이터를 이용하여 분석함으로써 우리나라의 AEO 인증 정책에 대한 해법을 제시하였다.

• 한국항공우주학회지
• /
• 제37권11호
• /
• pp.1066-1072
• /
• 2009

패널법(panel method)을 이용하여 포텐셜 유동조건에 있는 임의의 3차원 융합익기(Blended-Wing Body) 형상에 대해 정상/비정상 공력해석을 수행하였다. 본 연구 방법은 구간일정강도(piecewise constant strength) 용출(source) 및 중첩(doublet) 특이점(singularity)을 사용하고 Dirichlet 경계조건에 기초한 포텐셜 기저(potential based) 패널법과 물체고정좌표계의 각 방향에 대해 시간전진법(time-stepping method)을 결합한 방법이다. 본 프로그램은 임의의 3차원 BWB 형상 항공기의 공력해석을 빠르고 정확하게 수행할 수 있으며 BWB 항공기의 안정성을 위한 다양한 공력계수를 제공할 수 있다. 본 프로그램으로 3차원 정상/비정상 임의의 3차원 형상에 대하여 공력특성을 예측할 수 있어 BWB 항공기 설계단계, 비행 시뮬레이션과 같이 반복적 빠른 계산을 요구하는 실질적 응용에 크게 기여할 것이다.

• 한국지반환경공학회 논문집
• /
• 제23권12호
• /
• pp.17-23
• /
• 2022

본 논문은 Top-down 방식과 Bottom-up 방식으로 시공된 프리캐스트 판넬식 옹벽의 안전율 변화를 PLAXIS 2D 소프트웨어를 사용하여 수치해석하였다. 수치해석 조건은 시공방식, 네일 및 판넬의 고정방법, 뒤채움재 다짐상태, 강우조건 등이 있다. Top-down 방식과 Bottom-up 방식의 차이점은 뒤채움재의 유무와 지반굴착의 방식으로, Top-down 방식은 지반을 수직으로 굴착한 뒤 시공하나 Bottom-up 방식은 지반을 경사를 주어 굴착한 뒤 모르타르 및 뒤채움재를 이용하여 판넬을 부착한다. 수치해석 결과 Top-down 방식은 Bottom-up 방식과 비교하였을 때, 우기를 제외한 모든 경우에 더 높은 안전률을 확보하였다. Top-down 방식의 우기 시 안전율 저하는 Top-down 방식으로 시공 시 프리캐스트 판넬을 부착하기 위해 사용한 모르타르가 주된 원인이 된 것으로 판단하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.113-120
• /
• 1994

Large Concrete Panel Structures behave quite differently from frame or monolithic shear wall structures because of the weakness of Joint in stiffness and strength. The joint experiences large deformation such as shear-slip in vertical and horizontal joint and rocking and crushing in horizontal joint because of localized stress concentration, but the wall panels behave elastically under cyclic loads. In order to describe the nonlinear behavior of the joint in the analysis of PC structures, different analysis technique from that of RC structures is needed. In this paper, for analysis of large concrete panel subassemblage subjected to cyclic loads, the wall panels are idealized by elastic finite elements, and the joints by nonlinear spring elements with various load-deflection relationship. The analytical results are compared with the experimental results on the strength, stiffness, energy dissipation and lateral drift, and the effectiveness of this computer analysis modelling technique is checked.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.599-602
• /
• 2008

This paper deals with the optimization of Gas-Gas-Heater elements for desulfurization equipment through flow analysis. The flow analysis model used in the paper is ${\kappa}-{\varepsilon}$ turbulent flow model. Temperature and flow velocity distributions for three types of panel elements are calculated. Through the analysis the following conclusions are obtained. Firstly, pressure differences of between inlet and outlet for three types of panel elements do not exceed in the standard pressure difference. Secondly, it is expected that NU-type panel element having wide area of heat transfer will be more effective in the aspect of the heat transfer.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.577-584
• /
• 2003

Tension tests of half-thickness concrete containment wall elements and material tests were conducted to derive a crack pattern and constitutive law of concrete. Main test variables are reinforcement ratio and the applied load ratio in two direction, and its effect on the behavior of reinforced concrete panel subjected to biaxial tension is investigated. Based on the test results, analytical expression is derived for the stress-strain relationship of concrete in tension. Ultimate analyses of reinforced concrete panels are carried out by a general purpose structural analysis computer program(ABAQUS), and its results are compared with the test results. The present analysis focuses on the effects of pre-analysis prior to test of specimens. These ultimate tensile analyses as pre-analysis are essential and important to design an effectual scheme of test.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.591-598
• /
• 2003

The purpose of this study is to investigate the seismic behavior of reinforced concrete Containment Panel subjected to earthquake motions. A computer program, named RCAHEST(Reinforced Concrete Analysis in Higher Evaluation System Technology), was used for the analysis of reinforced concrete structures. A 4-node flat shell element with drilling rotational stiffness is used for spatial discretization. The layered approach is used to discretize behavior of concrete and reinforcement through the thickness. Material nonlinearity is taken into account by comprising tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. The smeared crack approach is incorporated. Solution of the equations of motion is obtained by numerical integration using Hither-Hughes-Taylor(HHT) algorithm. The proposed numerical method for the seismic analysis of reinforced concrete Containment panel is verified by comparison of analysis results with reliable experimental results.

• International Journal of Advanced Culture Technology
• /
• 제6권4호
• /
• pp.292-302
• /
• 2018

This study proposes a Bayesian stochastic frontier model that is well-suited to productivity/efficiency analysis particularly using panel data. A unique feature of our proposal is that both production frontier and efficiency are estimable for each individual firm and their linkage to various firm characteristics enriches our understanding of the source of productivity/efficiency. Empirical application of the proposed analysis to Human Capital Corporate Panel data enables identification and quantification of the effects of Human Resource factors on firm efficiency in tandem with those of firm types on production frontier. A comprehensive description of the Markov Chain Monte Carlo estimation procedure is forwarded to facilitate the use of our proposed stochastic frontier analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.475-476
• /
• 2007

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.131-135
• /
• 2006

The aerodynamic characteristics of a T-50 aircraft configuration are investigated by a subsonic panel method. Panel methods are best applicable to the lifting surfaces such as wings and airfoils. Source and doublets are used in the present code as a basic singularities of the panel technique. The panel method is first assessed by applying it to several benchmark problems for which other solutions and experimental data are available, such as a swept wing and wing body configuration. The prediction results are compared with experimental data and show good agreement in all cases considered. Finally, the method is applied to a T-50 aircraft configuration and excellent agreement with flight test data in lift coefficients is found.