• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.33-39
• /
• 2006

Trichromatic LED backlight renders higher colour gamut and panel transmittance to the LCDs than the phosphor-converted white LED backlight. In realization, however, several technical challenges arise, such as colour shift, due to the ambient temperature change, brightness decrease along with the temperature increase, colour mixing, minimizing the total number of chips and so on. In this paper we designed and tested the low cost temperature compensating circuit, using a thermistor as a temperature compensating element, for stabilizing the brightness and maintaining the colour coordinates of the trichromatic backlight units. By applying the temperature compensating circuit, the decrement rate of the brightness and colour shift rate were achieved by 54% and 51% respectively comparing with uncompensated case.

• Safety and Health at Work
• /
• v.13 no.1
• /
• pp.3-8
• /
• 2022

Background: This study aims to allow the development of efficient measures to improve occupational health of shift-working nurses focusing on job stress, health promotion behavior, resilience, and sleep disturbance. Methods: It was conducted on a subject panel of 137 nurses who were aware of the purpose of the study and agreed to participate. They worked three shifts at a tertiary hospital or a general hospital located in metropolitan city B. The collected data were analyzed by the independent t test and one-way analysis of variance and post-tested by Scheffe's test, Pearson's correlation coefficients, and multiple linear regression analysis using SPSS/WIN 25.0. Results: The significant influencing factors on sleep disturbance were of those whose subjective health status was 'normal' (b = 0.29, p < .001), 'not healthy' (β = .40, p < .001), who have job stress (β = .22, p = .003), and who have health promotion behavior (β = -0.17, p = .023). The overall explanatory power was 31.1% (F = 16.31, p < .001). Conclusion: Through this study, nurses' subjective health status and job stress of working shifts were found to be important factors influencing the sleep disturbance level, and the most influencing factor was identified as the subjective health status.

• Journal of Korean Academy of Nursing Administration
• /
• v.6 no.1
• /
• pp.55-81
• /
• 2000

This study examined nursing care in a Newborn Intensive Care Unit (NICU) by reviewing nursing activities for the newborns. Through direct observation, time used for nursing care according to the nursing activity, shift, day of the week, and position of the nurses was measured. This study was done on November 15, 21, 24, 1999 at a university medical center hospital and included eight nurses and 179 newborns as the study subjects. The data were collected from the medical records, and by using a nursing activity record for the NICU, and a nursing activity time record for the NICU. The first step in the data collection process was to develop a list of nursing activities which was done through a literature review, examination of medical affairs and duty records. Content validity was measured by a panel of three professors who were experienced clinicians. In the second step two pre-training sessions were held with three sophomore student nurses who then measured the time for each nursing activity using a stopwatch. The data were analyzed using frequencies for nursing activities, averages, percentages and ANOVA for differences between shift and between days of the week, and percentages and t-test for differences according to position of the nurse. The results are as follows: 1) The total number of activities was 156, direct or indirect nursing activities. Direct nursing activity classified according to physical, educational, emotional/social/economic/spiritual needs. There were 109 direct nursing activities in 16 fields. 2) The order of nursing activities, according to time required, was record keeping, nutritional care, measurement/observation, medication, hygiene care, examination and specimen collection, and checking supplies, and according to frequency, measurement/ examination, record keeping, nutrition care, hygiene care, elimination care and medication. 3) According to shift, direct care during the night shift at 313.4 minutes was the longest time and indirect nursing care during the night shift at 252.2 minutes was the highest time. 4) For days of the week, Monday had the highest time for direct care 275.8 minutes (34.6%) and Wednessday had the highest time for indirect nursing care 269.6 minutes (36.1%). 5) For nursing time according to position of nurse, general nurses had the highest for direct care (330.7 minutes), nurse managers for indirect nursing activities (239.0 minutes) and general nurses for individual private time (63.9 minutes). The results of this study show that the major nursing time consuming activities included record keeping, nutrition care and measurement/examination. For newborns, time needs to be allowed for care to be sensitive, sophisticated and specialized rather than concentrated on indirect nursing tasks such as record keeping. Therefore, it is imperative to develop computerized systems that support a systematic approach to record keeping which is more efficient. Moreover, nursing needs according to shift, day or position of nurse can be utilized in assessing nursing resources through a computerized process.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1364-1366
• /
• 1998

An active-matrix LCD using thin film transistors (TFT) has been widely recognized as having potential for high-quality color flat-panel displays. Pixel-Design Array Simulation Tool (PDAST) was used to profoundly understand the gate signal distortion and pixel charging capability, which are the most critical limiting factors for high-quality TFT-LCDs. Since PDAST can simulate the gate, data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the resistivity of gate line material on the pixel operations can be effectively analyzed. The gate signal delay. pixel charging ratio, level-shift of the pixel voltage were simulated with varying the parameters. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.628-631
• /
• 2002

$Al_2O_3$ capping layer and MgO protective layer were deposited by electron beam evaporation method using single crystal source. Thickness of the capping layer, $Al_2O_3$, was varied from 5 nm to 10 nm. Surface morphology was observed by SEM and AFM before and after hydration. And microstructure of deposited $Al_2O_3$ layer and chemical shift of electron binding energy were also observed by high resolution TEM and XPS, respectively, after hydration. From these results, it was found that Mg atoms diffused into $Al_2O_3$ layer, reacted with moisture and formed $Mg(OH)_2$ during hydration. As thickness of $Al_2O_3$ increased, extent of hydration increased. $Al_2O_3$ capped MgO thin films and uncapped MgO thin films were deposited on AC-PDP test panel to characterize discharge properties. Although $Al_2O_3$ has poor discharge properties rather than MgO, because of many hydrated species on the surface of MgO, similar discharge properties were observed.

• The Korean Journal of Applied Statistics
• /
• v.11 no.2
• /
• pp.461-475
• /
• 1998

In panel survey in which the sample is selected by stratified random sampling, if the sampling units shift from a stratum to others in time, then the movement should be incorporated in the estimation procedures. Dealing with the problem caused by the movement of units across stratum in the updated stratification sample, the bias of the conventional estimator neglecting the movement is investigated, arid the bias-adjusted estimators are proposed. The variance estimator of the suggested estimators is also derived. It is illustrated via a simulation study that the proposed estimators beat the conventional estimator in the sense of bias and mean squared error In particular, when the Neyman allocation is applied in stratified sampling, the proposed estimator is shown much more effective to this end.

• Journal of the military operations research society of Korea
• /
• v.2 no.1
• /
• pp.127-143
• /
• 1976

The purpose of this thesis is to study the optimal arrangement of aircraft instrument panels through the human factors approach. Human factors engineering is the process of effectively fitting the human component to the machine component in any man-machine system. The human factors. are especially important to an aircraft pilot who must constantly shift his attention between the instrument panel within the cockpit and the surrounding area of the aircraft. The preliminary part of this study is to find the general patterns of the Korean pilot's eye movements during their various flying maneuvers, and which instruments require the most attention while in flight. It is assumed that all pilots have a general pattern of eye movement when observing the aircraft instrument panel and that an optimum arrangement would be to minimize the eye travel distance between instruments. In this thesis the arrangements of instruments is taken to be the independent variable and the eye travel distance between instruments the dependent variable. la order to compile the information necessary for this study, sixty Korean Air Force pilots were interviewed and requested to complete information forms. These information forms listed various flying maneuvers and listed each instrument used on the instrument panel. The compilation of the information on these completed forms listed the instruments most frequently used by the pilots. The second part of this study was to determine the optimum instrument arrangement. It was necessary to study the various number of possible arrangements of instruments depending upon the number of instruments involved. Therefore, these instruments are grouped by two major functions, The flight instruments were subdivided into three groups, and the engineering instruments were subdivided into six groups. With this subdivision we arrive at the possible number of arrangements of 4,320. Through the simulation method, total eye travel distance for each of these 4,320 arrangements is calculated and the arrangement which appears to be of optimum distance between the most frequently used aircraft instruments is determined. The results of this study indicate that the optimum distance between instruments would be 33,028cm and that the corresponding distance of the instrument panel now being used is 34,288cm. Therefore, an increased efficiency of $3.8\%$ would be realized if the existing aircraft instrument panel were re-arranged according to layout proposed in this thesis.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.27-38
• /
• 1997

This paper is concerned with the calculation of the wave resistance for SWATH ships based on a low order Rankine source panel method. Two types of free surface boundary conditions, Dawson type (double model approximation) and Kelvin type (free stream approximation) are used. For the free surface boundary calculation, an analytic differentiation is employed instead of implementing a finite difference scheme. Then, the radiation condition is satisfied by, so called, the panel shift method. The numerical results using the above two methods are compared with those using the thin ship/modified slender body approximation and also with the experimental results. The SWATH models considered are a single strut SWATH and a twin strut SWATH together with the variations of two demihull separation distance. In order to prove the validity of the program developed, the numerical calculations for a Wigley mono hull and Wigley twin hulls are compared with the available experimental results.

• Journal of Power Electronics
• /
• v.9 no.5
• /
• pp.809-821
• /
• 2009

This paper proposes a new phase-shift full-bridge DC-DC converter by applying energy recovery circuits to a conventional full-bridge DC-DC converter in plasma display panel applications. The converter can achieve soft-switching in main-switches by an extra auxiliary resonant network even with the wide operating condition of both output load and input voltage. The un-coupled design guidelines to the main bridge-leg component parameters for soft-switching operation contribute to conduction loss reduction in the transformer primary side leading to efficiency improvement. The auxiliary switches in the resonant network also operate in zero-current switching. This paper analyzes the operation modes of the proposed scheme and presents the key design guidelines through steady state analysis. Also, the paper verifies the validity of the circuits by hardware experiments with a 1kW DC/DC converter prototype.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.516-519
• /
• 1996

Sub-assembly in ship manufacturing is a sequence of filet joint welding of stiffeners on metal panels and the process is different depending on companies. In this paper, we introduce a new intelligent robotic system of the sub-assembly process in Samsung Heavy Industry, where one shift of 22m * 9m workspace includes one to ten panels and each panel includes up to 10 stiffeners. The inherent problems such as several hundreds of different panels, unstructured task environment and the large scale do not allow a fixed automation, but needs highly intelligent versatile automation. The robotic system is composed of four 14DOF macro-mini robots and a task recognition system. Application of this system has verified the task specification such as low temperature environment(-10.deg. C) and productivity is satisfied successfully.