• 한국초전도ㆍ저온공학회논문지
• /
• 제11권4호
• /
• pp.33-36
• /
• 2009

An air gap between the pancake windings was provided in this paper to increase the central magnetic field of a high temperature superconducting (HTS) magnet consisting of pancake windings. Unlike the LTS magnet, providing an air gap between the pancake windings increases the central magnetic field of a HTS magnet. Furthermore, the uniformity of the magnetic field near the center of the magnet increased because the pancake windings spread out in wider area. Effects of the air gap on the central magnetic field of an HTS magnet was described in this paper, Calculation of the critical current was carried out by using E-J relation of the HTS wire and the optimization technique was adopted to obtain the appropriate critical current which could maximize the central magnetic field. Pancake windings with BSCCO-2223 HTS wire were wound on glass epoxy bobbin. 6 double pancake windings with 200 turns were used to construct a HTS magnet. Characteristics of the HTS magnet including the central magnetic field and the uniformity of the magnetic field were measured and compared with the results of calculation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권4호
• /
• pp.31-35
• /
• 2010

In superconducting magnet applications, winding methods of the superconducting magnet can be classified into a layer winding and a pancake winding. The superconducting magnet using high temperature superconductor (HTS) with rectangular shape is generally fabricated using the pancake winding method. On the other hand, low temperature superconducting (LTS) magnet may be wound by either a pancake winding or a layer winding. Compared with the layer winding, the pancake winding method has a merit of easy replacement of a damaged pancake module, but it also has a demerit of requirement of splicing between each double pancake modules. In this paper, we investigated characteristics of the layer and pancake winding methods using HTS. Six samples were wound out of BSCCO and Coated Conductors (CCs) by two winding methods and their characteristics were experimentally observed.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.263-265
• /
• 2003

A winding machine to fabricate the double pancake coils was manufactured. A race-track type double pancake coil using high temperature superconductor (HTS) tape was prepared and I-V and I-H characteristic curves were obtained at the atmosphere of liquid nitrogen. The winding method to make the double pancake coil and its properties is discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.824-825
• /
• 2011

This paper reports advantages of an insulationless high temperature superconductor (HTS) pancake coil compared with an insulated HTS pancake coil. The various characteristics of the insulationless HTS pancake coil were evaluated under charge-discharge conditions. Also over-current test was performed and the results were analysed to demonstrate that in terms of stability insulationless HTS pancake coil outperforms existing insulated HTS pancake coil.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.494-498
• /
• 2002

HTS transformer experimentally. High temperature superconductors can only be applied against an engineering specification that has to be determined for each particular application form the design requirements for economic viability and for operation margins in service. High temperature superconducting(HTS) power apparatus are very promising candidates for application. Especially, these advantages make superconducting transformers very promising candidates for application in electrical power engineering and locomotives. In order to realize the HTS transformer, it is necessary to establish the high voltage insulation technique in cryogenic temperature. So far, insulation research of Pancake type HTS transformer is lacking nothing but insulation research of . solenoid type transformer consisted. Therefore, the composite insulation of double pancake coil type transformer are described and ac breakdown voltage characteristics of liquid nitrogen(LN$_2$) under HTS pancake coil electrode made by Bi-2223/Ag are studied. Breakdown in LN$_2$ is dominated electrode shape and distance. The relation between surface flashover voltage is considered for FRP. This research presented basis information of electrical insulation design for double pancake coil type HTS transformer.

• 한국전기전자재료학회논문지
• /
• 제16권2호
• /
• pp.151-156
• /
• 2003

High temperature superconductor can only be applied against an engineering specofication that has to be determined for each particular application form the design requirements for economic viability and for operation margins in service. However, in order to realize the HTS transformer, it is necessary to establish the high voltage insulation technique in cryogenic temperature. Therefore, the composite insulation of double pancake coil type transformer are described and AC breakdown voltage characteristics of liquid nitrogen(LN$_2$) under HTS pancake coil electrode made by Bi-2223/Ag are studied. The Breakdown of LN$_2$ is dominated electrode shape and distance. The influence of pressure on breakdown voltage is discussed with th different electrode. For the electrical insulation design of turn-to-turn insulation for the HTS transformer, we tested breakdown strength of insulation sheet under varying pressure. And we investigated surface flashover properties of LN$_2$ and complex conition of cryogenic gaseous nitrogen(CGN$_2$) obove a LN$_2$ surface. The surface voltage of GFRP was measured as a function of thickness and electrode distance in LN$_2$ and complex condition of CGN$_2$ above a LN$_2$ surface. this research presented information of electrical insulation design for double pancake coil(DPC) type HTS transformer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
• /
• pp.52-57
• /
• 2002

High temperature superconductors can only be applied against an engineering specification that has to be determined for each particular application form the design requirements for economic viability and for operation margins in service. However, in order to realize the HTS transformer, it is necessary to establish the high voltage insulation technique in cryogenic temperature. Therefore, the composite insulation of double pancake coil type transformer are described and ac breakdown voltage characteristics of liquid nitrogen($LN_{2}$) under HITS pancake coil electrode made by Bi-2223/Ag are studied. Breakdown in $LN_{2}$ is dominated electrode shape and distance. And we investigated AC breakdown properties of $LN_{2}$ and complex conition of cryogenic gaseous nitrogen($CGN_{2}$) obove a $LN_{2}$ surface. Also, the surface voltage of GFRP was measured as a function of thickness and electrode distance in $LN_{2}$ and complex condition of $CGN_{2}$ above a $LN_{2}$ surface. This research presented information of electrical insulation design for double pancake coil type HTS transformer.

• 한국지능시스템학회논문지
• /
• 제24권4호
• /
• pp.430-436
• /
• 2014

행렬스타 그래프와 하프팬케익 그래프는 스타 그래프의 변형으로 노드 대칭성과 허용도 등 여러 가지 좋은 성질을 갖는다. 본 연구에서는 행렬스타 그래프와 하프팬케익 그래프 사이의 임베딩을 분석한다. 연구 결과로 행렬스타 그래프 $MS_{2,n}$는 하프팬케익 그래프 $HP_{2n}$에 연장율 5, 확장율 1에 임베딩 가능하다. 또한 하프팬케익 그래프 $HP_{2n}$는 행렬스타 그래프 $MS_{2,n}$에 임베딩하는 연장율 비용이 O(n)임을 보인다. 이러한 결과는 스타 그래프에서 개발된 여러 가지 알고리즘을 하프팬케익 그래프에서 상수의 추가적인 비용으로 시뮬레이션 할 수 있음을 의미한다. 왜냐하면 스타 그래프 $S_n$은 행렬스타 그래프 $MS_{2,n}$의 부분 그래프이기 때문이다.

• 컴퓨터교육학회논문지
• /
• 제13권5호
• /
• pp.91-102
• /
• 2010

스타 그래프는 노드 대칭성, 최대 고장 허용도, 계층적 분할 성질을 갖고, 하이퍼큐브보다 망 비용이 개선된 널리 알려진 상호 연결망이다. 본 연구에서는 스타 그래프와 그의 변형된 그래프들 상호 간의 임베딩 방법을 제안한다. 버블정렬 그래프가 팬케익 그래프와 스타 그래프에 각각 연장율 3, 확장율 1로 임베딩 가능함을 보이고, 팬케익 그래프가 버블정렬그래프에 임베딩 하는 연장율 비용이 O($n^2$)임을 보인다. 그리고 스타 그래프가 팬케익 그래프에 연장율 4, 확장율 1로 임베딩 가능함을 보인다. 또한 스타그래프를 버블정렬 그래프에, 팬케익 그래프를 스타 그래프에 임베딩 하는 연장율 비용이 각각 O(n)임을 보인다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.51-55
• /
• 2017

To obtain Nuclear Magnetic Resonance (NMR) measurement of membrane protein, an NMR magnet is required to generate high intensity, homogeneity, and stability of field. A High-Temperature Superconducting (HTS) magnet is a promising alternative to a conventional Low-Temperature Superconducting (LTS) NMR magnet for high field, current density, and stability margin. Conventionally, an HTS coil has been wound by several winding techniques such as Single-Pancake (SP), Double-Pancake (DP), and layer-wound. The DP winding technique has been frequently used for a large magnet because long HTS wire is generally difficult to manufacture, and maintenance of magnet is convenient. However, magnetic field generated by the slanted turns and the splice leads to field inhomogeneity in Diameter of Spherical Volume (DSV). The field inhomogeneity degrades performance of NMR spectrometer and thus effect of the slanted turns and the splice should be analyzed. In this paper, field gradient of HTS double-pancake coils considering the slanted turns and the splice was calculated using Biot-Savart law and numerical integration. The calculation results showed that magnetic field produced by the slanted turns and the splice caused significant inhomogeneity of field.