• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2333-2341
• /
• 2017

Mineral oils are commonly used as transformer insulation oils but these oils are obtained from non-renewable and non-sustainable sources, which is highly undesirable. For this reason, natural ester oils are now being used in replacement of mineral oils because of their good biodegradability, high cooling stability, good oxidation stability and excellent insulation performance. Nanotechnology has gained prominence in both academic and industrial fields over the years and it has been shown in previous studies that nanoscale materials are useful for transformers due to their favourable dielectric properties. The objective of this study is to compare the AC breakdown voltage and viscosity of natural ester oil with three types of nanofluids. The natural ester oil-based nanofluids are prepared by mixing palm fatty acid ester (PFAE) oil with three types of nanoparticles at a concentration of 0.01 g/l: (1) $Fe_3O_4$ conductive nanoparticles, (2) $TiO_2$ semi-conductive nanoparticles and (3) $Al_2O_3$ insulating nanoparticles. The AC breakdown voltage of the oil samples is analysed using Weibull statistical analysis and the results reveal that the PFAE oil-based $Fe_3O_4$ nanofluid gives exceptional dielectric performance compared to other oil samples, whereby the AC breakdown voltage increases by 43%. It can be concluded that the PFAE oil-based $Fe_3O_4$ nanofluid is a promising dielectric liquid to substitute mineral oils.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.857-862
• /
• 1989

Palm oil was crystallized and melted in the differential scanning calorimeter (DSC) in the presence and the absence of sucrose fatty acid ester (SE) at the different scanning rate. In the presence of SE, the crystallization temperature of palm oil was lowered, because SE inhibited the formation of mother crystal at the initial cooling stage The melting curves of SE added palm oil changed irregularly in the ${\alpha}-form$ transition and fusion entropy. It was that the presence of SE affected the molecular diffusion in palm oil.

• New & Renewable Energy
• /
• v.8 no.4
• /
• pp.38-43
• /
• 2012

Biodiesel is non-petroleum based fuel produced from vegetable oils or animal fats through transesterification. The compositions of saturated and unsaturated fatty acids in the feedstocks are important factors for biodiesel quality in terms of low-temperature fluidity and oxidative stability. The goal of this study is to improve the cold flow property of biodiesel from vegetable and animal origin containing highly saturated methyl esters (approx. 50%). In this purpose poly-saturated methyl esters in palm and tallow biodiesel were removed via urea-based fractionation and then the recovered fractions (enriched unsaturated fatty acid methyl esters) were supplemented with cold flow improvers. The highest concentration of unsaturated fatty acid methyl esters (93.8%) was obtained using a urea/fatty acid ratio of 3:1 at the crystallization temperature of $0^{\circ}C$ for 17 hours in incubation, with recovery of 71% and the addition of cold flow improver (Flozol$^{(R)}$ 515, 3,000 ppm) to the enriched poly-unsaturated fatty acid methyl esters reduced the CFPP(cold filter plugging point) of palm biodiesel from $12^{\circ}C$ to $-42^{\circ}C$. In tallow biodiesel both the enrichment of unsaturated fatty acid methyl esters (93.71%) and the addition of cold flow improver (Infineum R408, 3,000ppm) reduced the CFPP from $10^{\circ}C$ to $-32^{\circ}C$.

• Food Science of Animal Resources
• /
• v.21 no.1
• /
• pp.80-88
• /
• 2001

This study was carried out to evaluate the different physicochemical properties of various lipid sources in beef patties during storage for 6 months. Four groups of samples were made of beef meat patties with 22% of tallow, lard, chicken fat and 20% of palm oil. On the analysis result of physicochemical compositions, the patty has its own fatty acids composition and characteristic different from other lipids. Patty with chicken fat has the highest percentage of unsaturated fatty acid composition of 61.0% compared to the other groups of patties. Beef patty with chicken fat has 18.8% of poly unsaturated fatty acid(USFA) and beef patty with beef lipid has 1.5% of poly USFA which is the least percentage among the others. SFA/USFA ratio of beef patty with chicken lipid was 0.5 which was the least value. The composition of PUFA in beef patty with lard increased to 10.0% from 1.9% over initial value after storage for 6 months. On the contrary, the composition of PUFA in beef patty with chicken fat decreased to 9.2% from 18.8% over initial value after 6 months. Volatile free fatty acids of beef patties were evaluated with four kinds of lipid sources. Formic acid was the most as of 59$\mu\textrm{g}$/g in beef patty with tallow, acetic acid was 15$\mu\textrm{g}$/g, and heptanoic acid was 10$\mu\textrm{g}$/g at starting time of storage. However, propionic acid, butyric acid, valeric acid and caproic acid were not detected. After 6 months, formic acid decreased from 59$\mu\textrm{g}$/g to 7$\mu\textrm{g}$/g in the patty with tallow, from 12$\mu\textrm{g}$/g to non-detect level in the patty with palm oil, but two the others patties slightly increased. Volatile compounds in meat patties were reported nearly 1000 kinds of chemical compounds. Beef patty with tallow has aldehydes 5.3, alcohol 1.3, hydrocarbon 0.8, ketones 0.2, ester 0.1, furans 0.1, acid 0.04, sulfur 0.03 in peak area at starting and increased to aldehydes 8.5, alcohol 2.1, ketones 0.5, ester 1.0, furans 1.5 in peak area during the storage. But only furans was not detected after 6 months of storage. From starting to 6 months, aldehydes increased 2∼10 times, alcohol increased 2∼3 times, acids 4∼50 times and ester 9∼20 times in beef patties with pork lipid, chicken lipid and palm oil. Some volatile compounds such as alcohol, aldehydes and acids in all kinds of patties significantly increased after 6 months of storage. These increases cause oxidative rancidity taste in meat patties. These results showed that selt-life of meat patties with 4 different lipids were not over 6 months even though they were stored at -20$^{circ}C$. Therefore, they should be classified as off-grade because of oxidative rancidity. Although beef patties with tallow are currently common type, the possibility for new type of hamburg patty can be developed by applying different lipids. Finally, we found out new type of beef patty added with lard, which has the best taste and quality compared to the other common types.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.747-751
• /
• 2008

The effect of additives in the synthesis of biodiesel fuel using supercritical methanol was studied in order to examine the possibility of application of spent vegetable oil as a raw material, which has high contents of water or free fatty acid. The experiments were performed by varying the contents of water, free fatty acid or antioxidants respectively in a batch reactor. The contents of fatty acid methyl ester was analyzed by a gas chromatography. As the water contents increased, the contents of fatty acid methyl ester decreased, however, the decrease was very little compared with the alkaline and acid catalyst. The effect of the contents of free fatty acid, vitamin E, and ${\beta}$-carotene was negligible.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1048-1056
• /
• 2018

Non-edible oil sources (i.e., Palm Acid Oil, waste animal fat) usually contain relatively high amount of free fatty acids (FFA) that make them inadequate for direct base catalyzed transesterification reaction. Enzymatic biodiesel synthesis can solve several problems posed by the alkaline-catalyzed transesterification, and has certain advantages over the chemical catalysis of transesterification, as it is less energy intensive, allows easy recovery of glycerol and the transesterification of glycerides with high free fatty acid contents. In this study, we synthesized biodiesel through enzymatic catalyzed process using high free fatty acid containing waste oil in biodiesel reactor (1 ton/day) and optimized the biodiesel production processes.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3239-3242
• /
• 2013

An improved rapid method for determination of the fatty acid composition using modified methylation procedure was compared with the AOAC reference procedure based on the methylation of fatty acid with the addition of BF3 catalyst before and while heating. The new method is useful for research and routine quality control and has a number of advantages over the reference procedure which are more rapid, simple and also reliable. Applicability of the modified methylation method was confirmed with three vegetable oil samples (palm oil, coconut oil and olive oil). Based on the validation method results, we obtained that a quite linear calibration curve of fatty acids was performed with $R^2$ in range of 0.9972-0.9994. The sensitivity of gas chromatography instrument was able to analyze the fatty acids up to a few ppm, the precision and accuracy were good enough with the %RSD between 1.5%-19.5% and the recovery of linolenic acid was 99.1% in the range of 80.0%-113.3%.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.429-433
• /
• 2012

Purpose: While rapeseed oil, soy bean oil, palm oil and waste cooking oil are being used for biodiesel, the viscosity of them should be lowered for fuel. The most widely used method of decreasing the viscosity of vegetable oil is to convert the vegetable oil into fatty acid methyl ester but is too expensive. This experiment uses ultrasonic energy, instead of converting the vegetable oil into fatty acid methyl ester, to lower the viscosity of the waste cooking oil. Methods: For irradiation treatment, the sample in a beaker was irradiated with ultrasonic energy and the viscosity and temperature were measured with a viscometer. For heating treatment, the sample in a beaker was heated and the viscosity and temperature were measured with a viscometer. Kinematic viscosity was calculated by dividing absolute viscosity with density. Results: The kinematic viscosity of waste cooking oil and cooking oil are up to ten times as high as that of light oil at room temperature. However, the difference of two types of oil decreased by four times as the temperature increased over $83^{\circ}C$. When the viscosity by the treatment of ultrasonic energy irradiation was compared to one by the heating treatment to the waste cooking oil, the viscosity by the treatment of ultrasonic energy irradiation was lower by maximum of 22% and minimum of 12%, than one by the heating treatment. Conclusions: Ultrasonic energy irradiation lowered the viscosity more than the heating treatment did, and ultrasonic energy irradiation has an enormous effect on fuel reforming.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.4
• /
• pp.342-349
• /
• 2002

Rapeseed oil is easily oxidized due to the high contents of unsaturated fatty acid such as linoleic acid and linolenic acid. For stability of rapeseed oil oxidation, a special process is required. Two kind of simple and interesterifying mixed rapeseed oil were prepared according to add 30%, 50% and 70% of coconut oil and palm oil. Sample oils were heated at 180${\pm}$5$^{\circ}C$ for 5, 10, 15, 20, 25, 30 and 35 hours. Then the physicochemical properties such as the tendency of oxidation were investigated. The initial AV and POV of interesterifying mixed rapeseed oil were higher than those of simple mixed oil. But the tendency of oxidation were similar. While oxidation rate of similar and interesterifying mixed rapeseed oils with coconut oil and palm oil were lower about than those of rapeseed oil.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.8
• /
• pp.1113-1120
• /
• 2011

Enzymatic interesterification was conducted with the palm mid fraction (PMF) and stearic ethyl ester for 1, 5, and 9 hr at 46$^{\circ}C$. The reaction was catalyzed by Lipozyme TLIM (2, 3, and 4% by weight of total substrates) in a shaking water bath at 180 rpm. As the reaction continued, oleic acid (C18:1) content at the sn-2 position decreased, whereas saturated fatty acid (C16:0 and C18:0) content increased. In the high performance chromatography analysis, 1,3-dipalmitoyl-2-oleoyl glycerol content decreased, whereas 1(3)-palmitoyl-2-oleoyl-3(1)-stearoyl glycerol (POS) content increased up to the reaction equilibrium. The rate of acyl migration increased with increasing molar ratio and enzyme load as well as reaction time. The optimal reaction conditions for maximizing POS content (53.5 area%) and minimizing acyl migration (23.1 area%) were obtained with a PMF : stearic ethyl ester=1:2 (molar ratio), Lipozyme TLIM 3 wt%, and a reaction time of 5 hr.